No valid device tree blob found! with hummingboard FreeBSD-current

[Yoshiro MIHIRA]

Hi all,

I tried to use hummingboard-i2 and FreeBSD-11-current as below image

FreeBSD-11.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20150625-r284814.img

However I could not boot FreeBSD with below message.
Please let me know how to boot hummingboard-i2.

U-Boot SPL 2013.10-rc4 (Jun 25 2015 - 21:13:52)
Boot Device: UNKNOWN..
spl: error reading image u-boot.img, err - -1
Load image from RAW...


U-Boot 2013.10-rc4 (Jun 25 2015 - 21:13:52)

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
Reset cause: POR
Board: MX6-HummingBoard
DRAM:  1 GiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
** Unable to read file uEnv.txt **
Hit any key to stop autoboot:  0
Booting from: mmc 0 ubldr
260690 bytes read in 26 ms (9.6 MiB/s)
## Starting application at 0x12000094 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @4f7708a8

FreeBSD/armv6 U-Boot loader, Revision 1.2
(root at releng2.nyi.freebsd.org, Thu Jun 25 21:33:03 UTC 2015)

DRAM: 1024MB
Number of U-Boot devices: 2
U-Boot env: loaderdev='mmc 0'
Found U-Boot device: disk
  Checking unit=0 slice=<auto> partition=<auto>... good.
/
/boot/kernel/kernel data=0x5aa2dc+0x3dd24 syms=[0x4+0x5c970+0x4+0x586b1]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
No valid device tree blob found!

Type '?' for a list of commands, 'help' for more detailed help.
loader> fdt ls
No device tree blob found!

loader>

Yours
Yoshiro MIHIRA