Raspberry pi 11 Current panic
jungleboogie0
jungleboogie0 at gmail.com
Tue Mar 25 23:32:51 UTC 2014
And now to the group:
U-Boot 2013.01-rc1-svn18531 (Mar 24 2014 - 09:11:00)
DRAM: 480 MiB
WARNING: Caches not enabled
MMC: bcm2835_sdhci: 0
Using default environment
In: serial
Out: lcd
Err: lcd
mbox: Timeout waiting for response
bcm2835: Could not set USB power state
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
reading uEnv.txt
89 bytes read in 9419 ms (0 Bytes/s)
Importing environment from mmc ...
reading ubldr
249191 bytes read in 54770 ms (3.9 KiB/s)
## Starting application at 0x02000054 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @1db682a8
FreeBSD/armv6 U-Boot loader, Revision 1.2
(root at grind.freebsd.org, Mon Mar 24 09:10:50 UTC 2014)
DRAM: 480MB
Number of U-Boot devices: 1
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
Probing all disk devices...
Checking unit=0 slice=<auto> partition=<auto>... good.
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x4b96e4+0x2e91c syms=[0x4+0x86880+0x4+0x50b0b]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by U-Boot at address 0x0x100.
Kernel entry at 0x100100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r263665: Mon Mar 24 09:05:52 UTC 2014
root at grind.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm
FreeBSD clang version 3.4 (tags/RELEASE_34/final 197956) 20140216
CPU: ARM1176JZ-S rev 7 (ARM11J core)
Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
WB enabled LABT branch prediction enabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 536866816 (511 MB)
avail memory = 483893248 (461 MB)
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on
ofwbus0
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on
simplebus0
Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60
on simplebus0
gpio0: read-only pins: 46,47,48,49,50,51,52,53.
gpio0: reserved pins: 48,49,50,51,52,53.
gpioc0: <GPIO controller> on gpio0
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 16 on gpiobus0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on
simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on
simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on
simplebus0
spibus0: <OFW SPI bus> on spi0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq
24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70
on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0
uart0: console (115200,n,8,1)
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq
17 on simplebus0
usbus0 on dwcotg0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus1: could not get ranges
device_attach: simplebus1 attach returned 6
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 16GB <SDHC SU16G 8.0 SN 44764038 MFG 06/2012 by 3 SD> at mmc0
50.0MHz/4bit/65535-block
fb0: 656x416(0x0 at 0,0) 16bpp
fb0: pitch 1312, base 0x5e006000, screen_size 545792
fbd0 on fb0
vt_allocate: VT initialize with new VT driver.
random: unblocking device.
Root mount waiting for: usbus0
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on
usbus0
uhub1: MTT enabled
Root mount waiting for: usbus0
uhub1: 3 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
WARNING: /releng/11-armv6-RPI-B-snap/tmp/crochet/work/_.mount.freebsd was
not properly dismounted
smsc0: chip 0xec00, rev. 0002
warning: no time-of-day clock registered, system time will not be set
accurately
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:1c:6a:26
Enlarging root partition
mmcsd0s2 resized
mmcsd0s2a resized
growfs: requested size 15GB is not larger than the current filesystem size
15GB
Setting hostuuid: 9e15ff8d-b334-11e3-a379-b827eb1c6a26.
Setting hostid: 0x8ff482a8.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point swi.
Starting file system checks:
** SU+J Recovering /dev/mmcsd0s2a
** Reading 4194304 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
** 17 journal records in 2048 bytes for 26.56% utilization
** Freed 4 inodes (0 dirs) 0 blocks, and 1 frags.
***** FILE SYSTEM MARKED CLEAN *****
Mounting local file systems:.
Writing entropy file:.
Setting hostname: raspberry-pi.
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80001<RXCSUM,LINKSTATE>
ether b8:27:eb:1c:6a:26
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Waiting 30s for the default route interface: .....(no carrier)
Creating and/or trimming log files.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Configuring syscons: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting background file system checks in 60 seconds.
Mon Mar 24 09:29:41 UTC 2014
FreeBSD/arm (raspberry-pi) (ttyu0)
login: root
FreeBSD 11.0-CURRENT (RPI-B) #0 r263665: Mon Mar 24 09:05:52 UTC 2014
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o Security advisories and updated errata information for all releases are
at http://www.FreeBSD.org/releases/ <http://www.freebsd.org/releases/> -
always consult the ERRATA section
for your release first as it's updated frequently.
o The Handbook and FAQ documents are at
http://www.FreeBSD.org/<http://www.freebsd.org/>
and,
along with the mailing lists, can be searched by going to
http://www.FreeBSD.org/search/ <http://www.freebsd.org/search/>. If the
doc package has been installed
(or fetched via pkg install lang-freebsd-doc, where lang is the
2-letter language code, e.g. en), they are also available formatted
in /usr/local/share/doc/freebsd.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions at FreeBSD.org mailing list. If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page. If you are not familiar with manual pages, type `man man'.
Edit /etc/motd to change this login announcement.
root at raspberry-pi:~ # vmstat
procs memory page disks faults cpu
r b w avmpanic: mutex process lock not owned at
/usr/src/sys/kern/kern_sig.c:2874
KDB: enter: panic
[ thread pid 746 tid 100070 ]
Stopped at $d: ldrb r15, [r15, r15, ror r15]!
db> bt
Tracing pid 746 tid 100070 td 0xc29e2960
db_trace_self() at db_trace_self
pc = 0xc048d0bc lr = 0xc0130e18 (db_stack_trace+0xf4)
sp = 0xdcefca30 fp = 0xdcefca48
r10 = 0xc05dac10
db_stack_trace() at db_stack_trace+0xf4
pc = 0xc0130e18 lr = 0xc0130788 (db_command+0x270)
sp = 0xdcefca50 fp = 0xdcefcaf0
r4 = 0x00000000 r5 = 0x00000000
r6 = 0x00000000
db_command() at db_command+0x270
pc = 0xc0130788 lr = 0xc01304ec (db_command_loop+0x60)
sp = 0xdcefcaf8 fp = 0xdcefcb08
r4 = 0xc04cc6b0 r5 = 0xc04e6743
r6 = 0xc05dabfc r7 = 0xdcefccd8
r8 = 0xc05d14b0 r9 = 0xc05d14b4
r10 = 0xc05832e0
db_command_loop() at db_command_loop+0x60
pc = 0xc01304ec lr = 0xc0132eb4 (db_trap+0xd8)
sp = 0xdcefcb10 fp = 0xdcefcc30
r4 = 0x00000000 r5 = 0xc05dac08
r6 = 0xc05d14e0
db_trap() at db_trap+0xd8
pc = 0xc0132eb4 lr = 0xc028c130 (kdb_trap+0xcc)
sp = 0xdcefcc38 fp = 0xdcefcc58
r4 = 0x00000000 r5 = 0x00000001
r6 = 0xc05d14e0 r7 = 0xdcefccd8
kdb_trap() at kdb_trap+0xcc
pc = 0xc028c130 lr = 0xc04a0960 (undefinedinstruction+0x298)
sp = 0xdcefcc60 fp = 0xdcefccd0
r4 = 0x00000000 r5 = 0x00000000
r6 = 0xc04a0618 r7 = 0xe7ffffff
r8 = 0xc29e2960 r9 = 0xc028b9f0
r10 = 0xdcefccd8
undefinedinstruction() at undefinedinstruction+0x298
pc = 0xc04a0960 lr = 0xc048ec48 (exception_exit)
sp = 0xdcefccd8 fp = 0xdcefcd30
r4 = 0xc04e679d r5 = 0xdcefcd6c
r6 = 0xc04e4534 r7 = 0xc05c3a00
r8 = 0xc29e2960 r9 = 0xc05dc660
r10 = 0xc05c3860
exception_exit() at exception_exit
pc = 0xc048ec48 lr = 0xc028b9e4 (kdb_enter+0x40)
sp = 0xdcefcd28 fp = 0xdcefcd30
r0 = 0xc05d14c4 r1 = 0x00000000
r2 = 0xc04ea00b r3 = 0x000000ab
r4 = 0xc04e679d r5 = 0xdcefcd6c
r6 = 0xc04e4534 r7 = 0xc05c3a00
r8 = 0xc29e2960 r9 = 0xc05dc660
r10 = 0xc05c3860 r12 = 0x00000000
$a() at $a
pc = 0xc028b9f4 lr = 0xc02553d8 (vpanic+0xb4)
sp = 0xdcefcd38 fp = 0xdcefcd58
r4 = 0x00000100
vpanic() at vpanic+0xb4
pc = 0xc02553d8 lr = 0xc025543c (kproc_shutdown)
sp = 0xdcefcd60 fp = 0xdcefcd64
r4 = 0xc26d9c80 r5 = 0xc0512deb
r6 = 0xc04a1318 r7 = 0xec510b10
r8 = 0xc29e2960 r9 = 0x201c2d78
r10 = 0xdcefce68
kproc_shutdown() at kproc_shutdown
pc = 0xc025543c lr = 0xc29e2960 (0xc29e2960)
sp = 0xdcefcd6c fp = 0xdcefcd78
r4 = 0xc025543c r5 = 0xdcefcd6c
Unknown entry: 0
end() at 0xc29e2960
pc = 0xc29e2960 lr = 0xc29e2960 (0xc29e2960)
sp = 0xdcefcd6c fp = 0xdcefcd78
Unable to unwind into user mode
db>
On 25 March 2014 12:35, Adrian Chadd <adrian at freebsd.org> wrote:
> Can you type 'bt' in the debugger and paste that?
>
>
> -a
>
>
> On 25 March 2014 09:43, jungleboogie0 <jungleboogie0 at gmail.com> wrote:
> > Hello All,
> >
> >
> >
> > I grabbed 11-CURRENT for raspberry pi here:
> > ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0
> >
> > Booted up my pi and I'm trying to run vnstat but this occurs:
> >
> > root at raspberry-pi:~ # vmstat
> > procs memory page disks faults
> cpu
> > r b w avm fpanic: mutex process lock not owned at
> > /usr/src/sys/kern/kern_sig.c:2874
> > KDB: enter: panic
> > [ thread pid 747 tid 100063 ]
> > Stopped at $d: ldrb r15, [r15, r15, ror r15]!
> >
> > So far I've been able to do this 3 times in a row by simply logging in
> and
> > typing vmstat.
> >
> > Is this expected behavior?
> >
> >
> >
> > --
> > -------
> > inum: 883510009902611
> > sip: jungleboogie at sip2sip.info
> > xmpp: jungle-boogie at jit.si
> > _______________________________________________
> > freebsd-arm at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> > To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>
--
-------
inum: 883510009902611
sip: jungleboogie at sip2sip.info
xmpp: jungle-boogie at jit.si
More information about the freebsd-arm
mailing list