Raspberry Pi Binary Snapshot of 10.0?

[Glen Barber]

Do you have console access to it?  I'm curious where it gets stuck, and
even more curious if there is network activity afterwards (in
particular, I wonder if console output is being misdirected).

Glen

On Tue, Jan 21, 2014 at 08:21:33PM -0500, Jordan Starcher wrote:
> I gave the 10.0-RELEASE build a shot and it gets stuck early on in the boot
> kernel section. This is the same behavior I saw when I created a build
> using Crochet with the 10.0-RELEASE source. It's odd because it doesn't
> even make it far enough to hit the mounting error 19. I reflashed your
> 10.0-PRERELEASE and booted up perfectly. Also worth noting, the
> autosize_enable does work after the second boot.
> 
> 
> On Tue, Jan 21, 2014 at 7:49 PM, Glen Barber <gjb at freebsd.org> wrote:
> 
> > Great to hear.
> >
> > FWIW, I've moved the location of the images, so they are all in one
> > directory (and checksums are included):
> >
> >     http://people.freebsd.org/~gjb/RPI/
> >
> > There is also an (untested by me yet, and *NOT* official) 10.0-RELEASE
> > image there.
> >
> > I'm working on integrating this into the release build process, so it is
> > very much "work in progress, may eat your cookies" kind of stuff.  It is
> > a wrapper around Crochet to do clean-room builds within a chroot.
> >
> > The in-progress stuff is located here:
> >
> >     svn.freebsd.org/base/user/gjb/hacking/release-embedded
> >
> > Glen
> >
> > On Tue, Jan 21, 2014 at 07:41:14PM -0500, Jordan Starcher wrote:
> > > Hi Glen,
> > >
> > > I tested with the 11.0-CURRENT image and had the same error: Mounting
> > > failed with error 19.
> > >
> > > I bought a new SD Card today and flashed your 10.0 image and it worked
> > > perfectly the first time! I guess these SD Cards are a bit finicky.
> > >
> > > Thank you very much for the help, your image seems to be working like a
> > > champ. I'll pickup another SD Card to test your 11.0 image as well. May I
> > > ask what build procedures you used?
> > >
> > > Best,
> > > Jordan
> > >
> > >
> > > On Tue, Jan 21, 2014 at 1:09 AM, Glen Barber <gjb at freebsd.org> wrote:
> > >
> > > > I should have noted I have not personally tested the 10.0-PRERELEASE
> > > > build.
> > > >
> > > > I have seen your issue in the past, however.  I'm not clear on the
> > > > cause.
> > > >
> > > > For experimentation purpose, can you try this build?
> > > >
> > > > http://people.freebsd.org/~gjb/FreeBSD-11.0-CURRENT-RPI-B.img.bz2
> > > >
> > > > I'm mostly curious if the behavior is the same (i.e., if may be related
> > > > to the SD card itself).
> > > >
> > > > SHA256 (FreeBSD-11.0-CURRENT-RPI-B.img.bz2) =
> > > > a7722ef975a04a8a7c651b616c802a7d7adf3811f768db65697b5a8e50c8300b
> > > >
> > > > Glen
> > > >
> > > > On Tue, Jan 21, 2014 at 01:00:44AM -0500, Jordan Starcher wrote:
> > > > > Hi Glen,
> > > > >
> > > > > I seem to be running into the same error with your build. I checked
> > the
> > > > > sha256 hash and had the correct binary. See attached error.
> > > > >
> > > > > Thanks,
> > > > > Jordan
> > > > >
> > > > > On Tuesday, January 21, 2014, Glen Barber <gjb at freebsd.org> wrote:
> > > > >
> > > > > > On Tue, Jan 21, 2014 at 12:38:15AM -0500, Jordan Starcher wrote:
> > > > > > > Hi,
> > > > > > >
> > > > > > > I've been trying to build a Raspberry Pi Model B binary image of
> > > > FreeBSD
> > > > > > > 10.0 using a 10.0 host and the crochet-freebsd script but have
> > been
> > > > > > > failing. I can get built image to POST, but it gets stuck when
> > > > attempting
> > > > > > > to initialize the kernel.
> > > > > > >
> > > > > > > Does anyone have a 10.0 image I can use?
> > > > > > >
> > > > > >
> > > > > > I have had some build failures with my release/10.0.0/ builds for
> > RPI.
> > > > > >
> > > > > > Can you try this image, built from stable/10/ ?
> > > > > >
> > > > > >
> > http://people.freebsd.org/~gjb/FreeBSD-10.0-PRERELEASE-RPI-B.img.bz2
> > > > > >
> > > > > > SHA256 (FreeBSD-10.0-PRERELEASE-RPI-B.img.bz2) =
> > > > > > aec511f434d551c95a53c979add5b9b84d2618bbd2e2e012db9364e1985f5de3
> > > > > >
> > > > > > Glen
> > > > > >
> > > > > >
> > > >
> > > >
> > > >
> >
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-arm/attachments/20140121/cca002fc/attachment.sig>