Booting Beagle Board Black fails.

[Ulrich Grey]

I have applied the patch (I had to use the -l option).
Now the BBB is booting successfully (r275482).

Regards

Ulrich
-----------------------------------------------
On Sat, 6 Dec 2014 10:41:47 -0200
Luiz Otavio O Souza <lists.br at gmail.com> wrote:

> On 5 December 2014 at 15:13, Ulrich Grey wrote:
> > I tried it with current, revision 275482:
> > #
> > FreeBSD/armv6 U-Boot loader, Revision 1.2
> > (root at noname.privat, Thu Dec  4 23:55:39 CET 2014)
> >
> [...]
> > musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff,0x
> > 47401000-0x474012ff,0x47401300-0x474013ff,0x47401400-0x474017ff,0x47401800-0x474
> > 01aff,0x47401b00-0x47401bff,0x47401c00-0x47401fff irq 17,18,19 on simplebus0
> > musbotg0: TI AM335X USBSS v0.0.13
> > Fatal kernel mode data abort: 'External Non-Linefetch Abort (S)'
> > trapframe: 0xc0816d08
> > FSR=00001008, FAR=ffa00010, spsr=40000193
> > r0 =00000000, r1 =ffa00000, r2 =00000010, r3 =c054bd10
> > r4 =c29b1e80, r5 =c2ad4000, r6 =c2ad63d0, r7 =c2ad63ec
> > r8 =c0680a30, r9 =c0709680, r10=00000020, r11=c0816d98
> > r12=c054bd28, ssp=c0816d58, slr=c056b484, pc =c054bd10
> 
> Ulrich,
> 
> Could you try this: http://pastebin.com/k69CFxyy
> 
> For some reason (only happens with USB) we have to wait a bit to read
> from controller registers after issuing a reset and this doesn't
> affect everyone only a few people have seen this here and there.
> 
> HTH,
> Luiz