Booting Beagle Board Black fails.
Ulrich Grey
usenet at ulrich-grey.de
Fri Dec 5 17:14:33 UTC 2014
I tried it with current, revision 275482:
#
FreeBSD/armv6 U-Boot loader, Revision 1.2
(root at noname.privat, Thu Dec 4 23:55:39 CET 2014)
DRAM: 512MB
Number of U-Boot devices: 2
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
Probing all disk devices...
Checking unit=0 slice=<auto> partition=<auto>... good.
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x483348+0x94cb8 syms=[0x4+0x87620+0x4+0x514ff]
/boot/kernel/geom_label.ko text=0x4ce4 data=0x76c+0x4 syms=[0x4+0xee0+0x4+0xe36]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by U-Boot at address 0x80000100.
Kernel entry at 0x80200100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r275482M: Thu Dec 4 23:48:42 CET 2014
root at noname.privat:/usr/home/gwg/00-TRANSIT/crochet-freebsd-NEU/trunk/work/o
bj/arm.armv6/usr/SRC/head/sys/BEAGLEBONE arm
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Cortex A8-r3 rev 2 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:1
Cache level 1:
32KB/64B 4-way data cache WT WB Read-Alloc
32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 536870912 (512 MB)
avail memory = 513007616 (489 MB)
Texas Instruments AM3358 Processor, Revision ES1.1
random device not loaded/active; using insecure pseudo-random number generator
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
aintc0: <TI AINTC Interrupt Controller> mem 0x48200000-0x48200fff on simplebus0
aintc0: Revision 5.0
ti_scm0: <TI Control Module> mem 0x44e10000-0x44e11fff on simplebus0
am335x_prcm0: <AM335x Power and Clock Management> mem 0x44e00000-0x44e012ff on s
implebus0
am335x_prcm0: Clocks: System 24.0 MHz, CPU 1000 MHz
am335x_dmtimer0: <AM335x DMTimer> mem 0x44e05000-0x44e05fff,0x44e31000-0x44e31ff
f,0x48040000-0x48040fff,0x48042000-0x48042fff,0x48044000-0x48044fff,0x48046000-0
x48046fff,0x48048000-0x48048fff,0x4804a000-0x4804afff irq 66,67,68,69,92,93,94,9
5 on simplebus0
Timecounter "AM335x Timecounter" frequency 24000000 Hz quality 1000
Event timer "AM335x Eventtimer" frequency 24000000 Hz quality 1000
ti_adc0: <TI ADC controller> mem 0x44e0d000-0x44e0efff irq 16 on simplebus0
ti_adc0: scheme: 0x1 func: 0x730 rtl: 0 rev: 0.1 custom rev: 0
ti_wdt0: <TI Watchdog Timer> mem 0x44e35000-0x44e35fff irq 91 on simplebus0
gpio0: <Ti AM335x General Purpose I/O (GPIO)> mem 0x44e07000-0x44e07fff,0x4804c0
00-0x4804cfff,0x481ac000-0x481acfff,0x481ae000-0x481aefff irq 96,97,98,99,32,33,
62,63 on simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 53 on gpiobus0
gpioled1: <GPIO led> at pin(s) 54 on gpiobus0
gpioled2: <GPIO led> at pin(s) 55 on gpiobus0
gpioled3: <GPIO led> at pin(s) 56 on gpiobus0
uart0: <TI UART (16550 compatible)> mem 0x44e09000-0x44e09fff irq 72 on simplebu
s0
uart0: console (115384,n,8,1)
ti_edma30: <TI EDMA Controller> mem 0x49000000-0x490fffff,0x49800000-0x498fffff,
0x49900000-0x499fffff,0x49a00000-0x49afffff irq 12,13,14 on simplebus0
ti_edma30: EDMA revision 40014c00
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 64 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
sdhci_ti1: <TI MMCHS (SDHCI 2.0)> mem 0x481d8000-0x481d8fff irq 28 on simplebus0
mmc1: <MMC/SD bus> on sdhci_ti1
cpsw0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a103fff irq 40,41,42
,43 on simplebus0
cpsw0: CPSW SS Version 1.12 (0)
cpsw0: Initial queue size TX=128 RX=384
miibus0: <MII bus> on cpsw0
smscphy0: <SMC LAN8710A 10/100 interface> PHY 0 on miibus0
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cpsw0: Ethernet address: c8:a0:30:bf:08:b1
iichb0: <TI I2C Controller> mem 0x44e0b000-0x44e0bfff irq 70 on simplebus0
iichb0: I2C revision 4.0 FIFO size: 32 bytes
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
am335x_pmic0: <TI TPS65217 Power Management IC> at addr 0x48 on iicbus0
iichb1: <TI I2C Controller> mem 0x4802a000-0x4802afff irq 71 on simplebus0
iichb1: I2C revision 4.0 FIFO size: 32 bytes
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iichb2: <TI I2C Controller> mem 0x4819c000-0x4819cfff irq 30 on simplebus0
iichb2: I2C revision 4.0 FIFO size: 32 bytes
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
am335x_pwm0: <AM335x PWM> mem 0x48300000-0x483000ff,0x48300100-0x4830017f,0x4830
0180-0x483001ff,0x48300200-0x4830025f irq 86,58 on simplebus0
am335x_pwm1: <AM335x PWM> mem 0x48302000-0x483020ff,0x48302100-0x4830217f,0x4830
2180-0x483021ff,0x48302200-0x4830225f irq 87,59 on simplebus0
am335x_pwm2: <AM335x PWM> mem 0x48304000-0x483040ff,0x48304100-0x4830417f,0x4830
4180-0x483041ff,0x48304200-0x4830425f irq 88,60 on simplebus0
musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff,0x
47401000-0x474012ff,0x47401300-0x474013ff,0x47401400-0x474017ff,0x47401800-0x474
01aff,0x47401b00-0x47401bff,0x47401c00-0x47401fff irq 17,18,19 on simplebus0
musbotg0: TI AM335X USBSS v0.0.13
Fatal kernel mode data abort: 'External Non-Linefetch Abort (S)'
trapframe: 0xc0816d08
FSR=00001008, FAR=ffa00010, spsr=40000193
r0 =00000000, r1 =ffa00000, r2 =00000010, r3 =c054bd10
r4 =c29b1e80, r5 =c2ad4000, r6 =c2ad63d0, r7 =c2ad63ec
r8 =c0680a30, r9 =c0709680, r10=00000020, r11=c0816d98
r12=c054bd28, ssp=c0816d58, slr=c056b484, pc =c054bd10
[ thread pid 0 tid 100000 ]
Stopped at generic_bs_r_4: ldr r0, [r1, r2]
db> bt
Tracing pid 0 tid 100000 td 0xc0708a50
db_trace_self() at db_trace_self
pc = 0xc05501b4 lr = 0xc0231b44 (db_stack_trace+0xf4)
sp = 0xc08169f8 fp = 0xc0816a10
r10 = 0xc0707aac
db_stack_trace() at db_stack_trace+0xf4
pc = 0xc0231b44 lr = 0xc02314b4 (db_command+0x270)
sp = 0xc0816a18 fp = 0xc0816ab8
r4 = 0x00000000 r5 = 0x00000000
r6 = 0x00000000
db_command() at db_command+0x270
pc = 0xc02314b4 lr = 0xc0231218 (db_command_loop+0x60)
sp = 0xc0816ac0 fp = 0xc0816ad0
r4 = 0xc0598d57 r5 = 0xc05b40dd
r6 = 0xc0707a98 r7 = 0xc0653d88
r8 = 0xc06a3a24 r9 = 0xc06a3a20
r10 = 0x00000000
db_command_loop() at db_command_loop+0x60
pc = 0xc0231218 lr = 0xc0233c8c (db_trap+0xd8)
sp = 0xc0816ad8 fp = 0xc0816bf8
r4 = 0x00000000 r5 = 0xc0707aa4
r6 = 0xc06a3a48
db_trap() at db_trap+0xd8
pc = 0xc0233c8c lr = 0xc03a20f4 (kdb_trap+0xbc)
sp = 0xc0816c00 fp = 0xc0816c20
r4 = 0x00000000 r5 = 0x00001008
r6 = 0xc06a3a48 r7 = 0xc0653d88
kdb_trap() at kdb_trap+0xbc
pc = 0xc03a20f4 lr = 0xc0565be8 (dab_fatal+0x174)
sp = 0xc0816c28 fp = 0xc0816c40
r4 = 0xc0816d08 r5 = 0x00001008
r6 = 0x200001d3 r7 = 0xffa00010
r8 = 0x00000013 r9 = 0xc0708a50
r10 = 0x00000000
dab_fatal() at dab_fatal+0x174
pc = 0xc0565be8 lr = 0xc05660b0 (dab_buserr+0x60)
sp = 0xc0816c48 fp = 0xc0816c58
r4 = 0xc0816d08 r5 = 0xc0708a50
r6 = 0xc0816c88 r7 = 0x00001008
dab_buserr() at dab_buserr+0x60
pc = 0xc05660b0 lr = 0xc05656dc (data_abort_handler+0x150)
sp = 0xc0816c60 fp = 0xc0816d00
r4 = 0xc0816eb0 r5 = 0xc0816d08
r6 = 0xc0566050
data_abort_handler() at data_abort_handler+0x150
pc = 0xc05656dc lr = 0xc0551f74 (exception_exit)
sp = 0xc0816d08 fp = 0xc0816d98
r4 = 0xc29b1e80 r5 = 0xc2ad4000
r6 = 0xc2ad63d0 r7 = 0xc2ad63ec
r8 = 0xc0680a30 r9 = 0xc0709680
r10 = 0x00000020
exception_exit() at exception_exit
pc = 0xc0551f74 lr = 0xc056b484 (musbotg_attach+0x108)
sp = 0xc0816d58 fp = 0xc0816d98
r0 = 0x00000000 r1 = 0xffa00000
r2 = 0x00000010 r3 = 0xc054bd10
r4 = 0xc29b1e80 r5 = 0xc2ad4000
r6 = 0xc2ad63d0 r7 = 0xc2ad63ec
r8 = 0xc0680a30 r9 = 0xc0709680
r10 = 0x00000020 r12 = 0xc054bd28
generic_bs_r_4() at generic_bs_r_4
pc = 0xc054bd10 lr = 0xc056b484 (musbotg_attach+0x108)
sp = 0xc0816d58 fp = 0xc0816d98
Unwind failure (no registers changed)
db> show all pcpu
Current CPU: 0
cpuid = 0
dynamic pcpu = 0x18ea40
curthread = 0xc0708a50: pid 0 "swapper"
curpcb = 0xc0816eb0
fpcurthread = none
idlethread = 0xc297e330: tid 100002 "idle"
spin locks held:
db>
#
--------------------------------------------------------------------------
On Fri, 5 Dec 2014 16:57:48 +0100
Svatopluk Kraus <onwahe at gmail.com> wrote:
> Michal tested it a few months ago and it worked. With last BBB current
> snapshot from freebsd ftp, it hangs on same place. Unfortunately, JTAG is
> not on BBB by default, so it takes a while to deal with it. However, we
> will fix it certainly.
>
> Svatopluk Kraus
>
>
> On Thu, Dec 4, 2014 at 7:02 PM, Ulrich Grey <usenet at ulrich-grey.de> wrote:
>
> > I have built an image for Beagle Bone Black with crochet from the
> > alternate source tree
> > from Svatopluk Kraus and Michal Meloun. If I try to boot the board (I have
> > pressed the
> > button etc.), I get this on the serial console:
> >
> > Hit [Enter] to boot immediately, or any other key for command prompt.
> > Booting [/boot/kernel/kernel]...
> > Using DTB provided by U-Boot at address 0x80000100.
> > Kernel entry at 0x80200100...
> > Kernel args: (null)
> >
> > There it hangs.
> > Can anyone give me advice?
> >
> > Regards
> >
> > Ulrich
> > _______________________________________________
> > freebsd-arm at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> > To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> >
More information about the freebsd-arm
mailing list