BBB 1GHz patches for u-boot 2014-01

[fabiodive]

Hello all,

I was compiling some new ports on my BBB and suddenly I got on the
serial console header:

mmcsd0: Error indicated: 1 Timeout
sdhci_ti0-slot0: Got data interrupt 0x00000010, but there is no active command.
sdhci_ti0-slot0: ============== REGISTER DUMP ==============
sdhci_ti0-slot0: Sys addr: 0x00000000 | Version:  0x00003101
sdhci_ti0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000040
sdhci_ti0-slot0: Argument: 0x002751be | Trn mode: 0x0000193a
sdhci_ti0-slot0: Present:  0x01e70000 | Host ctl: 0x00000006
sdhci_ti0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_ti0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_ti0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_ti0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_ti0-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
sdhci_ti0-slot0: ===========================================
mmcsd0: Error indicated: 1 Timeout
sdhci_ti0-slot0: Got data interrupt 0x00000010, but there is no active command.
sdhci_ti0-slot0: ============== REGISTER DUMP ==============
sdhci_ti0-slot0: Sys addr: 0x00000000 | Version:  0x00003101
sdhci_ti0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000040
sdhci_ti0-slot0: Argument: 0x0027b23e | Trn mode: 0x0000193a
sdhci_ti0-slot0: Present:  0x01e70000 | Host ctl: 0x00000006
sdhci_ti0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_ti0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_ti0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_ti0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_ti0-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
sdhci_ti0-slot0: ===========================================
mmcsd0: Error indicated: 1 Timeout
sdhci_ti0-slot0: Got data interrupt 0x00000010, but there is no active command.
sdhci_ti0-slot0: ============== REGISTER DUMP ==============
sdhci_ti0-slot0: Sys addr: 0x00000000 | Version:  0x00003101
sdhci_ti0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000040
sdhci_ti0-slot0: Argument: 0x004e543e | Trn mode: 0x0000193a
sdhci_ti0-slot0: Present:  0x01f70000 | Host ctl: 0x00000006
sdhci_ti0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_ti0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_ti0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_ti0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_ti0-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
sdhci_ti0-slot0: ===========================================
g_vfs_done():mmcsd0s2a[WRITE(offset=667156480, length=32768)]error = 5
g_vfs_done():mmcsd0s2a[WRITE(offset=1317208064, length=32768)]error = 5
g_vfs_done():mmcsd0s2a[WRITE(offset=1329856512, length=32768)]error = 5
mmcsd0: Error indicated: 1 Timeout
sdhci_ti0-slot0: Got data interrupt 0x00000010, but there is no active command.
sdhci_ti0-slot0: ============== REGISTER DUMP ==============
sdhci_ti0-slot0: Sys addr: 0x00000000 | Version:  0x00003101
sdhci_ti0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000040
sdhci_ti0-slot0: Argument: 0x004e7c7e | Trn mode: 0x0000193a
sdhci_ti0-slot0: Present:  0x01f70000 | Host ctl: 0x00000006
sdhci_ti0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_ti0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_ti0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_ti0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_ti0-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
sdhci_ti0-slot0: ===========================================
mmcsd0: Error indicated: 1 Timeout
sdhci_ti0-slot0: Got data interrupt 0x00000010, but there is no active command.
sdhci_ti0-slot0: ============== REGISTER DUMP ==============
sdhci_ti0-slot0: Sys addr: 0x00000000 | Version:  0x00003101
sdhci_ti0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000040
sdhci_ti0-slot0: Argument: 0x004e7cbe | Trn mode: 0x0000193a
sdhci_ti0-slot0: Present:  0x01f70000 | Host ctl: 0x00000006
sdhci_ti0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_ti0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_ti0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_ti0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_ti0-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
sdhci_ti0-slot0: ===========================================
mmcsd0: Error indicated: 1 Timeout
sdhci_ti0-slot0: Got data interrupt 0x00000010, but there is no active command.
sdhci_ti0-slot0: ============== REGISTER DUMP ==============
sdhci_ti0-slot0: Sys addr: 0x00000000 | Version:  0x00003101
sdhci_ti0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000040
sdhci_ti0-slot0: Argument: 0x004e7cfe | Trn mode: 0x0000193a
sdhci_ti0-slot0: Present:  0x01f70000 | Host ctl: 0x00000006
sdhci_ti0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_ti0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
sdhci_ti0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_ti0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_ti0-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
sdhci_ti0-slot0: ===========================================
g_vfs_done():mmcsd0s2a[WRITE(offset=2626158592, length=32768)]error = 5

vm_fault(0xc0731c70, 0, 1, 0) -> 1
Fatal kernel mode data abort: 'Translation Fault (P)'
trapframe: 0xdcfcebc0
FSR=00000017, FAR=00000010, spsr=40000013
r0 =00000001, r1 =c262c320, r2 =c262c320, r3 =00000010
r4 =00000010, r5 =00000000, r6 =cd08ae90, r7 =c278acd4
r8 =c072b260, r9 =00000000, r10=00000000, r11=dcfcec40
r12=0000ffff, ssp=dcfcec10, slr=c04534e8, pc =c046fd18

panic: Fatal abort
Uptime: 28m43s
Automatic reboot in 15 seconds - press a key on the console to abort

could be a sdcard problem but I am not sure,
the system is a: Beaglebone Black running FreeBSD 11 built with the
last crochet source code from github.

root at beaglebone:~ # uname -ar
FreeBSD beaglebone 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r264703: Mon Apr 21 04:52:38 WEST 2014

Please, if somebody has some ideas…very welcome.
Thank you

cheers,
f.