freebsd/pandaboard Spurious interrupt detected [0x000003ff]

[David Cheney]

Nope, no luck with the sdhci driver

Copyright (c) 1992-2013 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 11.0-CURRENT #0 r257599M: Mon Nov  4 14:10:54 EST 2013

    root at deadwood.local:/root/crochet-freebsd/work/obj/arm.armv6/root/crochet-freebsd/src/sys/PANDABOARD
arm

FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610

CPU: Cortex A9-r1 rev 3 (Cortex-A core)

 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext

 WB disabled EABT branch prediction enabled

LoUU:2 LoC:1 LoUIS:2

Cache level 1:

 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc

 32KB/32B 4-way instruction cache Read-Alloc

real memory  = 1073741824 (1024 MB)

avail memory = 1042800640 (994 MB)

Texas Instruments OMAP4430 Processor, Revision ES2.3

random device not loaded; using insecure entropy

random: <Software, Yarrow> initialized

fdtbus0: <Flattened Device Tree>

simplebus0: <Flattened device tree simple bus> on fdtbus0

gic0: <ARM Generic Interrupt Controller> mem
0x48241000-0x48241fff,0x48240100-0x482401ff on simplebus0

gic0: pn 0x390, arch 0x1, rev 0x0, implementer 0x43b nirqs 160

omap4_prcm0: <TI OMAP Power, Reset and Clock Management> mem
0x4a306000-0x4a307fff,0x4a004000-0x4a004fff,0x4a008000-0x4a00ffff on
simplebus0

l2cache0: <PL310 L2 cache controller> mem 0x48242000-0x48242fff irq 32
on simplebus0

l2cache0: Part number: 0x3, release: 0x4

l2cache0: L2 Cache: 1024KB/32B 16 ways

mp_tmr0: <ARM Generic MPCore Timers> mem
0x48240200-0x482402ff,0x48240600-0x482406ff irq 27,29 on simplebus0

Timecounter "ARM MPCore Timecounter" frequency 504000000 Hz quality 1000

Event timer "ARM MPCore Eventtimer" frequency 504000000 Hz quality 1000

uart0: <16750 or compatible> mem 0x48020000-0x48020fff irq 106 on simplebus0

uart0: console (115384,n,8,1)

ti_scm0: <TI Control Module> mem 0x4a100000-0x4a100fff on simplebus0

gpio0: <TI General Purpose I/O (GPIO)> mem
0x4a310000-0x4a310fff,0x48055000-0x48055fff,0x48057000-0x48057fff,0x48059000-0x48059fff,0x4805b000-0x4805bfff,0x4805d000-0x4805dfff
irq 61,62,63,64,65,66 on simplebus0

gpioc0: <GPIO controller> on gpio0

gpiobus0: <GPIO bus> on gpio0

ehci0: <TI OMAP USB 2.0 controller> mem
0x4a064c00-0x4a064cff,0x4a064000-0x4a0646ff,0x4a062000-0x4a062fff irq
109 on simplebus0

ehci0: Starting TI EHCI USB Controller

ehci0: UHH revision 0x50700100

ehci0: OMAP_UHH_SYSCONFIG: 0x00000014

ehci0: UHH setup done, uhh_hostconfig=0x8000001c

usbus0: EHCI version 1.0

usbus0 on ehci0

iichb0: <TI I2C Controller> mem 0x48070000-0x480700ff irq 88 on simplebus0

iichb0: I2C revision 4.0

iicbus0: <OFW I2C bus> on iichb0

iic0: <I2C generic I/O> on iicbus0

ti_sdma0: <TI sDMA Controller> mem 0x4a056000-0x4a056fff irq
44,45,46,47 on simplebus0

ti_sdma0: sDMA revision 00010900

sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x4809c000-0x4809cfff irq 115 on
simplebus0

Timecounters tick every 10.000 msec

usbus0: 480Mbps High Speed USB v2.0

ugen0.1: <Texas Instruments> at usbus0

uhub0: <Texas Instruments EHCI root HUB, class 9/0, rev 2.00/1.00,
addr 1> on usbus0

random: unblocking device.

Root mount waiting for: usbus0

Root mount waiting for: usbus0

uhub0: 3 ports with 3 removable, self powered

Root mount waiting for: usbus0

ugen0.2: <vendor 0x0424> at usbus0

uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr
2> on usbus0

uhub1: MTT enabled

Root mount waiting for: usbus0

uhub1: 5 ports with 4 removable, self powered

ugen0.3: <vendor 0x0424> at usbus0

smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0

Trying to mount root from ufs:/dev/mmcsd0s2 [rw,noatime]...

mountroot: waiting for device /dev/mmcsd0s2 ...

smsc0: chip 0xec00, rev. 0002

miibus0: <MII bus> on smsc0

ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0

ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

ue0: <USB Ethernet> on smsc0

ue0: Ethernet address: 76:ed:d8:c2:d4:6f

Mounting from ufs:/dev/mmcsd0s2 failed with error 19.


Loader variables:

  vfs.root.mountfrom=ufs:/dev/mmcsd0s2

  vfs.root.mountfrom.options=rw,noatime


Manual root filesystem specification:

  <fstype>:<device> [options]

      Mount <device> using filesystem <fstype>

      and with the specified (optional) option list.


    eg. ufs:/dev/da0s1a

        zfs:tank

        cd9660:/dev/acd0 ro

          (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)


  ?               List valid disk boot devices

  .               Yield 1 second (for background tasks)

  <empty line>    Abort manual input


mountroot> ?


List of GEOM managed disk devices:



mountroot>

On Mon, Nov 4, 2013 at 1:36 PM, David Cheney <david.cheney at canonical.com> wrote:
> On Mon, Nov 4, 2013 at 1:33 PM, Ian Lepore <ian at freebsd.org> wrote:
>> On Mon, 2013-11-04 at 13:19 +1100, David Cheney wrote:
>>> Thanks Ian, try now.
>>>
>>> As a question to the group, I have the following hardware
>>>
>>> Pandaboard
>>> BeagleBone Black
>>> RPi
>>>
>>> And I am trying to bring up Freebsd/arm so I can get our Go builder
>>> working again[1]. Of these candidates, which is the one you would
>>> recommend ?
>>>
>>> Cheers
>>>
>>> Dave
>>>
>>> [1] build.golang.org
>>
>> The pandaboard is the fastest of those I think, but the Beaglebone may
>> be the best combo of speed and well-supported if these pandaboard
>> problems don't go away quickly for you.
>
> Thanks Ian.
>
> I got the BBB recently because it appeared to be the best supported,
> but it appears to be suffering from the issue of selecting a very low,
> ~550mhz clock speed no matter what source it is connected too, leading
> to build times for ports and go of many hours.
>
>>
>> -- Ian
>>
>>