FreeBSD on Raspberry Pi 512MB (with U-Boot + ubldr)

[Mats Mellstrand]

Hi



On 30 nov 2012, at 17:53, Daisuke Aoyama <aoyama at peach.ne.jp> wrote:

> Hi,
> 
>>> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>>> mmcsd0: 14GB <SDHC SD16G 8.0 SN 53686086 MFG 08/2012 by 3 SD> at mmc0 25.0MHz/4bit/65535-block
>>> mmcsd0: Error indicated: 2 Bad CRC
>>> mmcsd0: Error indicated: 2 Bad CRC
>> 
>> This issue must be fixed by r243688 and r243689
> 
> It seems fixed. But found another problem. SWAP never used even if I set GPU=384MB.
> Also, around freemem=260MB(GPU=16MB), get the program crashed.
> 
> 
> I've recreated the image based on build-pi-image.sh + SVN 243703 + my custom settings.
> All settings are the same as previous mail. (FreeBSD source tree is not modified)
> Please try this instead.

Success!

I tried ifconfig_ue0="DHCP" in /etc/rc.local, this however don't work:

This gives :

/etc/rc.d/dhclient: WARNING: failed to start dhclient

in the boot message

But I can start dhclient manually after boot.

/mm


> 
> You can try my test version from:
> http://www.peach.ne.jp/archives/rpi/freebsd-pi-20121201.img.gz
> 
> SHA256 (freebsd-pi-20121130.img.gz) = a4159301e2d7564ef065aa4c3d6afaef3284cc3ace1ae7c146aaea9e18ec0457
> SHA256 (freebsd-pi-20121201.img.gz) = 7a0b8bcda7f70c39b259811c12854fcf856af7e18436e9beb0c2fa25a7fdb0e0
> 
> Using config is here:
> http://www.peach.ne.jp/archives/rpi/config/RPI-B-test3
> 
> -- 
> Daisuke Aoyama