Avila GW2348-4 and VLANs not working

[Warner Losh]

Crazy question: Does NFS root boot work?

Warner

On Aug 27, 2012, at 11:40 AM, John-Mark Gurney wrote:

> Over the weekend, I tried to update my board to support VLANs, and when
> I did, things didn't go so well.  I have 9.0-PRERELEASE installed on it,
> but the npe driver hasn't changed much since then, so I'm not sure updating
> will fix things...
> 
> When I tried to run VLANs on the board, things didn't work.  When I
> tcpdump'd the base interface, I got a ton of truncated-ip messages...
> Some of the packets that were suppose to be on a vlan didn't appear to
> have a vlan tag on the npe0 interface...  I previously used the same
> switch w/ an older x86 box and vlans worked fine, though on a much
> older FreeBSD release...
> 
> I've attached the dmesg.boot...  iirc, the modifications to the source
> were some things to make pf usable, but that's about it...
> 
> Any ideas what needs to be done to make vlans work?
> 
> P.S.  Since I only have one board, and I'm using this as a firewall
> experimenting is a little difficult.  Anyone know of a another good
> ARM board that I could use (and isn't too expensive)?
> 
> Thanks.
> 
> -- 
>  John-Mark Gurney				Voice: +1 415 225 5579
> 
>     "All that I will do, has been done, All that I have, has not."
> <dmesg.boot>_______________________________________________
> freebsd-arm at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"