Dreamplug : USB support

[Fabien Thomas]

Le 25 avr. 2012 à 16:54, Hans Petter Selasky a écrit :

> On Wednesday 25 April 2012 16:15:55 Fabien Thomas wrote:
>> 	Hi,
>> 
>> It seems that sometimes USB works on Dreamplug and sometimes not.
>> 
>> I've included a working dmesg and a full debug output of the non-working
>> boot. I've tried to increase the timeout in usb.h but without success.
>> 
>> Maybe someone will have a clue for  this problem ?
>> 
>> Fabien
>> 
>> Success:
>> 
>> uhub0: 1 port with 1 removable, self powered
>> Root mount waiting for: usbus0
>> ugen0.2: <vendor 0x1a40> at usbus0
>> uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on
>> usbus0 Root mount waiting for: usbus0
>> uhub1: 4 ports with 4 removable, self powered
>> Root mount waiting for: usbus0
>> Root mount waiting for: usbus0
>> ugen0.3: <vendor 0x05e3> at usbus0
>> umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/99.10, addr 3> on
>> usbus0 umass0:  SCSI over Bulk-Only; quirks = 0x4000
>> umass0:0:0:-1: Attached to scbus0
>> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>> da0: <Generic STORAGE DEVICE 9910> Removable Direct Access SCSI-0 device
>> da0: 40.000MB/s transfers
>> da0: 3724MB (7626752 512 byte sectors: 255H 63S/T 474C)
> 
> Is this a hardware builtin USB device?

This is the SoC USB port that is connected to a hub and then USB to SD controller (https://www.globalscaletechnologies.com/t-dreamplugdetails.aspx#hw_block).
I've not included the info but it was on 8.3 release.


> 
> --HPT