GlobalScale DreamPlug + FreeBSD 8.2 release

[Naoyuki Tai]

I just occurred to me that I had a weird build problem cross compiling. It turned out I had CPUTYPE set to an Intel CPU in /etc/make.conf. 
Make sure you don't have anything like it.
Build does not complain when ARCH is arm and CPU set to intel.  

--
Naoyuki "Tai" Tai, ntai a t smartfruit d o t com


On Oct 1, 2011, at 4:49, Mattia Rossi <mrossi at swin.edu.au> wrote:

>>> 
>>> I don't know.. it just doesn't work for me.
>>> 
>>> U-Boot 2011.06-02334-g8f495d9-dirty (Mar 28 2011 - 05:21:06)
>>> Marvell-DreamPlug
>>> 
>>> SoC: Kirkwood 88F6281_A0
>>> DRAM: 512 MiB
>>> SF: Detected MX25L1606 with page size 256, total 1 MiB
>>> In: serial
>>> Out: serial
>>> Err: serial
>>> Net: egiga0, egiga1
>>> 88E1121 Initialized on egiga0
>>> 88E1121 Initialized on egiga1
>>> Hit any key to stop autoboot: 0
>>> Marvell>> set ipaddr 192.168.12.80
>>> Marvell>> set serverip 192.168.12.81
>>> Marvell>> tftpboot 0x900000 kernel.bin
>>> No link on egiga0
>>> Using egiga1 device
>>> TFTP from server 192.168.12.81; our IP address is 192.168.12.80
>>> Filename 'kernel.bin'.
>>> Load address: 0x900000
>>> Loading:
>>> #################################################################
>>> #################################################################
>>> #################################################################
>>> ###################################
>>> done
>>> Bytes transferred = 3366392 (335df8 hex)
>>> Marvell>> go 0x900000
>>> ## Starting application at 0x00900000 ...
>>> 
>>> 
>>> And there it just hangs.
>>> Kernel compiled with:
>>> KERNCONF=DB-88F6XXX
>>> TARGET=arm
>>> TARGET_ARCH=arm
>>> 
>>> Help?
>>> 
>>> Mat
>>> 
>> 
>> I have luck with SheevaPlug based kernel config.
>> Here is the kernel config file I'm using. It's based on SheevaPlug.
>> You probably need to adjust the root FS, network protocol.
>> 
>> Good luck.
>> 
> 
> Thanks Naoyuki,
> 
> I've tried the KERNCONF you sent me, but still no luck.
> 
> I had to add the following line to get it to compile though:
> 
> options FDT
> 
> Hope that didn't kill it.
> 
> The kernel still hangs after i tell uboot to go to 0x900000
> 
> This is weird.
> 
> Mat
>