GlobalScale DreamPlug + FreeBSD 8.2 release

[Mattia Rossi]

>>
>> I don't know.. it just doesn't work for me.
>>
>> U-Boot 2011.06-02334-g8f495d9-dirty (Mar 28 2011 - 05:21:06)
>> Marvell-DreamPlug
>>
>> SoC: Kirkwood 88F6281_A0
>> DRAM: 512 MiB
>> SF: Detected MX25L1606 with page size 256, total 1 MiB
>> In: serial
>> Out: serial
>> Err: serial
>> Net: egiga0, egiga1
>> 88E1121 Initialized on egiga0
>> 88E1121 Initialized on egiga1
>> Hit any key to stop autoboot: 0
>> Marvell>> set ipaddr 192.168.12.80
>> Marvell>> set serverip 192.168.12.81
>> Marvell>> tftpboot 0x900000 kernel.bin
>> No link on egiga0
>> Using egiga1 device
>> TFTP from server 192.168.12.81; our IP address is 192.168.12.80
>> Filename 'kernel.bin'.
>> Load address: 0x900000
>> Loading:
>> #################################################################
>> #################################################################
>> #################################################################
>> ###################################
>> done
>> Bytes transferred = 3366392 (335df8 hex)
>> Marvell>> go 0x900000
>> ## Starting application at 0x00900000 ...
>>
>>
>> And there it just hangs.
>> Kernel compiled with:
>> KERNCONF=DB-88F6XXX
>> TARGET=arm
>> TARGET_ARCH=arm
>>
>> Help?
>>
>> Mat
>>
>
> I have luck with SheevaPlug based kernel config.
> Here is the kernel config file I'm using. It's based on SheevaPlug.
> You probably need to adjust the root FS, network protocol.
>
> Good luck.
>

Thanks Naoyuki,

I've tried the KERNCONF you sent me, but still no luck.

I had to add the following line to get it to compile though:

options FDT

Hope that didn't kill it.

The kernel still hangs after i tell uboot to go to 0x900000

This is weird.

Mat