Iomega iConnect and FreeBSD (kirkwood)

[Marcin Jurczuk]

Hello,

I'm trying to setup FreeBSD 8.2 on iomega iConnect device which is
based on platform similar/(identical) to SheevaPlug and Segate
Dockstar. However not everything seems to beexactly the same bacause I
have problems with kernel boot and mge0 ethernet adapter.
I used DB-88F6XXX kernel conifig since this platform is CPU: Feroceon
88FR131 rev 1 (Marvell core)
I'm able to boot system however kernel panic occurs with folowing message:
----------------------------------------
mge0: <Marvell Gigabit Ethernet controller> at mem
0xf1072000-0xf1073fff irq 12,13,14,11,46 on mbus0
mge0: Ethernet address: 00:d0:b8:0d:f6:5d
mge0: attaching PHYs failed

vm_fault(0xc0bfcd18, 0, 1, 0) -> 1
Fatal kernel mode data abort: 'Translation Fault (S)'
trapframe: 0xc0d7cc2c
FSR=00000005, FAR=00000008, spsr=600000d3
r0 =00000016, r1 =f1020200, r2 =00000004, r3 =00080002
r4 =00000000, r5 =00000000, r6 =0000000c, r7 =00000000
r8 =c0b58b50, r9 =c229c080, r10=c22c7000, r11=c0d7cc90
r12=c0d7cc78, ssp=c0d7cc78, slr=c0b30a00, pc =c0b30a00

[thread pid 0 tid 100000 ]
Stopped at      arm_remove_irqhandler+0x28:     ldr     r3, [r5, #0x008]
db>
--------------------------------------------
Is there anyone who have some experience with this platform ?
Regards,

-- 
Matin,