no da* with umass on RM9200

[Bernd Walter]

On Sat, Apr 18, 2009 at 03:18:08PM -0600, M. Warner Losh wrote:
> In message: <200904182212.52142.hselasky at c2i.net>
>             Hans Petter Selasky <hselasky at c2i.net> writes:
> : On Saturday 18 April 2009, Bernd Walter wrote:
> : > Just updated to recent current today - mainly to try the new USB code
> : > on RM9200.
> : > USB devices are detected fine, but with umass I don't get any disk
> : > devices, although support for pass and da is compiled into the kernel.
> : > I tried a few different umass flash reader, which are all know to work.
> : >
> : 
> : The new USB code also supports the UDP (USB Device Port).

I know, but my board has no UDP support.

> : How does your kernel config file look?
> 
> The AT91RM9200 has three USB ports.  Two are USB Host ports.  One is
> the device port.  I thikn that Bernd is complaining that his flash
> drives plugged into the usb host ports were detected as umass device,
> but no da0 was attached.

Exactly.

> There were some changes to CAM recently that broke this, and some even
> more recently that I think fixed something akin to this...

Ah - I was a bit surprised about that because I saw earlier reports
where umass worked.
Umass and hubs both never worked for me on the RM9200, but it is long
time ago since I tested.

-- 
B.Walter <bernd at bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.