[RFC] [Optionally] build tests with buildworld

[Brooks Davis]

On Wed, Apr 24, 2013 at 09:15:30AM -0700, Garrett Cooper wrote:
> 
> On Apr 23, 2013, at 10:28 AM, Garrett Cooper wrote:
> 
> > On Apr 23, 2013, at 9:59 AM, Brooks Davis wrote:
> > 
> >> On Fri, Apr 19, 2013 at 11:17:50PM -0700, Garrett Cooper wrote:
> >>> Hi arch@ and toolchain@,
> >>>   One of the items that I'm proposing be added to Makefile.inc1 in
> >>> order to make building and installing tests on CURRENT (ATF and
> >>> otherwise) is a build knob called TESTS_WITH_WORLD (the name can be
> >>> modified), which allows me to build and install various tests on my
> >>> git branch like the example ATF tests I produced, pjdfstest, some of
> >>> the prove tests from tools/regression, etc (there are other
> >>> outstanding changes, but this was the key one that I need feedback on
> >>> just to be safe).
> >> 
> >> I don't understand way you don't use WITH_TESTS processed
> >> through bsd.own.mk.  You'd presumably have to add it to the list of
> >> supported NO_* options for the bootstrap case, but that's trivial.  Then
> >> you use could use normal MK_* variables.  That would also let you use
> >> WITH(OUT)_TESTS in individual directories and they would always work.
> >> 
> >> At a glance using WITHOUT_TESTS and NO_TEST internally would simplify
> >> some of the special cases in your patch.
> > 
> > This is something that I considered, but I wasn't sure that it was the best route to go about things because I thought we were doing away/had done away with most of the NO_* knobs (and unfortunately one cannot mix and match WITH_* and WITHOUT_* because they're considered contradictory according to bsd.own.mk -- something that Simon has debated against having in the past).
> > 
> > I'm all for doing that though because that would simplify things greatly from an end-user perspective.
> 
> Hi Brooks!
> 	Does this look ok? Most of the MK_TESTS logic has been shoved into bsd.own.mk and NO_TESTS is sprinkled around Makefile.inc1 as recommended.
> Thanks!
> -Garrett

The functional parts seem fine.  Some comments below.

-- Brooks

> Index: Makefile.inc1
> ===================================================================
> --- Makefile.inc1	(revision 249833)
> +++ Makefile.inc1	(working copy)
> @@ -91,6 +91,9 @@
>  .if ${MK_OFED} != "no"
>  SUBDIR+=contrib/ofed
>  .endif
> +.if ${MK_TESTS} != "no"
> +SUBDIR+=tests
> +.endif
>  #
>  # We must do etc/ last for install/distribute to work.
>  #
> @@ -253,7 +256,8 @@
>  		SSP_CFLAGS= \
>  		-DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \
>  		-DNO_PIC -DNO_PROFILE -DNO_SHARED \
> -		-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD
> +		-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD \
> +		-DNO_TESTS \

The trailing backslash may be a good idea, but is inconsistant with all
the Makefiles in the system.  If you want to make that change is should
discussed seperately.

>  
>  # build-tools stage
>  TMAKE=		MAKEOBJDIRPREFIX=${OBJTREE} \
> @@ -263,12 +267,14 @@
>  		BOOTSTRAPPING=${OSRELDATE} \
>  		SSP_CFLAGS= \
>  		-DNO_LINT \
> -		-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD
> +		-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD \
> +		-DNO_TESTS \
>  
>  # cross-tools stage
>  XMAKE=		TOOLS_PREFIX=${WORLDTMP} ${BMAKE} \
>  		TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
> -		-DWITHOUT_GDB
> +		-DWITHOUT_GDB \
> +		-DNO_TESTS \
>  
>  # world stage
>  WMAKEENV=	${CROSSENV} \
> @@ -343,7 +349,8 @@
>  		-DLIBRARIES_ONLY \
>  		-DNO_CPU_CFLAGS \
>  		-DNO_CTF \
> -		-DNO_LINT
> +		-DNO_LINT \
> +		-DNO_TESTS \
>  
>  LIB32WMAKE=	${LIB32WMAKEENV} ${MAKE} ${LIB32WMAKEFLAGS} \
>  		-DWITHOUT_BIND -DWITHOUT_MAN -DWITHOUT_INFO -DWITHOUT_HTML
> @@ -489,7 +496,7 @@
>  	@echo "--------------------------------------------------------------"
>  	${_+_}cd ${.CURDIR}; \
>  	    ${WMAKE} -DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
> -	    -DWITHOUT_MAN -DNO_PROFILE libraries
> +	    -DWITHOUT_MAN -DNO_PROFILE -DNO_TESTS libraries
>  _depend:
>  	@echo
>  	@echo "--------------------------------------------------------------"
> @@ -1734,6 +1741,7 @@
>  NOFUN=-DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
>  	-DWITHOUT_MAN -DWITHOUT_NLS -DNO_PROFILE \
>  	-DWITHOUT_KERBEROS -DWITHOUT_RESCUE -DNO_WARNS \
> +	-DNO_TESTS \

This could be on the previous line.

>  	TARGET=${XDEV} TARGET_ARCH=${XDEV_ARCH} \
>  	CPUTYPE=${XDEV_CPUTYPE}
>  
> Index: share/mk/bsd.own.mk
> ===================================================================
> --- share/mk/bsd.own.mk	(revision 249833)
> +++ share/mk/bsd.own.mk	(working copy)
> @@ -376,8 +376,16 @@
>      NAND \
>      OFED \
>      OPENSSH_NONE_CIPHER \
> -    SHARED_TOOLCHAIN
> +    SHARED_TOOLCHAIN \
>  
> +# bsd.test.mk doesn't work with !bmake. Also don't build tests if NO_TESTS is
> +# defined; this is for buildworld and elsewhere (ports potentially).
> +.if defined(.PARSEDIR) && !defined(NO_TESTS)
> +__DEFAULT_NO_OPTIONS+=TESTS
> +.else
> +MK_TESTS:=	no
> +.endif
> +
>  #
>  # Default behaviour of some options depends on the architecture.  Unfortunately
>  # this means that we have to test TARGET_ARCH (the buildworld case) as well
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 188 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-arch/attachments/20130424/6ba686d7/attachment.sig>