amd64/171355: FreeBSD 9.1rc1 (and 10-HEAD) not booting on HP Pavilion g6 2147sl

[John Baldwin]

The following reply was made to PR amd64/171355; it has been noted by GNATS.

From: John Baldwin <jhb at freebsd.org>
To: freebsd-amd64 at freebsd.org
Cc: Stefano Marinelli <stefano at dragas.it>,
 freebsd-gnats-submit at freebsd.org,
 Alexander Motin <mav at freebsd.org>,
 re at freebsd.org
Subject: Re: amd64/171355: FreeBSD 9.1rc1 (and 10-HEAD) not booting on HP Pavilion g6 2147sl
Date: Thu, 6 Sep 2012 14:10:12 -0400

 On Wednesday, September 05, 2012 4:14:48 pm Stefano Marinelli wrote:
 > 
 > >Number:         171355
 > >Category:       amd64
 > >Synopsis:       FreeBSD 9.1rc1 (and 10-HEAD) not booting on HP Pavilion g6 
 2147sl
 > >Confidential:   no
 > >Severity:       non-critical
 > >Priority:       low
 > >Responsible:    freebsd-amd64
 > >State:          open
 > >Quarter:        
 > >Keywords:       
 > >Date-Required:
 > >Class:          sw-bug
 > >Submitter-Id:   current-users
 > >Arrival-Date:   Wed Sep 05 20:20:03 UTC 2012
 > >Closed-Date:
 > >Last-Modified:
 > >Originator:     Stefano Marinelli
 > >Release:        9.1-rc1
 > >Organization:
 > >Environment:
 > impossible to obtain - machine stops at boot
 > >Description:
 > Hi,
 > I tried to install FreeBSD 9.1-rc1 (amd64 and i386, no difference) on the HP 
 Pavilion g6 2147sl. The installation disk's loader runs, the kernel starts to 
 boot then hangs. No strange messages come out (even with verbose output turned 
 on) and the boot process stops there. Everything seems to be recognised in a 
 proper way (usb3, ahci, re0 network card, etc).
 > I've done some tests (thanks to the suggestions on the ##freebsd irc 
 channel's people) but no success and no further information to add. I can't 
 even go to ddb. But if I remove the cd from the tray, the status change gets 
 detected and the kernel prints something on the screen.
 > 
 > 9.0 can boot, but it's almost unusable as both the re0 and the wifi 
 interface aren't detected and there isn't any support for power management so 
 fans are running all the time.
 > 
 > It seems to stop after USB recognition. But I guess it's already finished> 
 with usb...
 
 Does 9.1 fail to recognize the on-board disk?  I've seen several reports of 
 9.1 failing to discover certain SSD's but working ok with spinning disks on 
 IBM laptops where 9.0 worked fine.
 
 -- 
 John Baldwin