amd64/174409: stopping during resume caused by io_apic.c change(r243764)
Kaho Toshikazu
kaho at elam.kais.kyoto-u.ac.jp
Mon Dec 17 12:20:01 UTC 2012
The following reply was made to PR amd64/174409; it has been noted by GNATS.
From: Kaho Toshikazu <kaho at elam.kais.kyoto-u.ac.jp>
To: Andriy Gapon <avg at freebsd.org>
Cc: bug-followup at freebsd.org
Subject: Re: amd64/174409: stopping during resume caused by io_apic.c change(r243764)
Date: Mon, 17 Dec 2012 20:59:32 +0900
Hello, and sorry for delay reply.
> Could you please provide unabridged verbose dmesg from this system?
unload ehci.ko and uhci.ko in /etc/rc.suspend and
load ehci.ko and uhci.ko in /etc/rc.resume.
Some modules load after boot using kld_list in rc.conf:
kld_list="miibus if_iwn usb usb_quirk ehci uhci ichsmb iic smbus
iicsmb smb snd_hda coretemp ng_ubt vkbd cuse4bsd wlan_amrr
wlan_ccmp wlan_tkip wlan_wep linux"
-- dmesg --
Table 'FACP' at 0xb9ff4000
Table 'DMAR' at 0xb9ff5000
Table 'HPET' at 0xb9ff3000
Table 'APIC' at 0xb9ff2000
APIC: Found table at 0xb9ff2000
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 0 ACPI ID 3: disabled
MADT: Found CPU APIC ID 0 ACPI ID 4: disabled
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #9 r243763:244180: Thu Dec 13 18:24:35 JST 2012
root at bansidhe.pf2.ed.niigata-u.ac.jp:/usr/obj/usr/src/sys/BANSIDHE amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80adf000.
Preloaded elf obj module "/boot/kernel/miibus.ko" at 0xffffffff80adf288.
Preloaded elf obj module "/boot/kernel/agp.ko" at 0xffffffff80adf830.
Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff80adfe18.
Preloaded elf obj module "/boot/kernel/cpufreq.ko" at 0xffffffff80ae0400.
Preloaded elf obj module "/boot/kernel/kbdmux.ko" at 0xffffffff80ae09e8.
Preloaded elf obj module "/boot/kernel/acpi_wmi.ko" at 0xffffffff80ae1050.
Preloaded elf obj module "/boot/kernel/hwpmc.ko" at 0xffffffff80ae1680.
CPU: Genuine Intel(R) CPU U2300 @ 1.20GHz (K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 0x6 Model = 0x17 Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000b11000 - 0x00000000b07d0fff, 2949382144 bytes (720064 pages)
0x00000000b9ebf000 - 0x00000000b9f7ffff, 790528 bytes (193 pages)
0x00000000b9fbf000 - 0x00000000b9fe1fff, 143360 bytes (35 pages)
0x00000000b9ff7000 - 0x00000000b9ffffff, 36864 bytes (9 pages)
0x0000000100000000 - 0x000000013ffe7fff, 1073643520 bytes (262120 pages)
avail memory = 3986374656 (3801 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ACRSYS ACRPRDCT>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x098000-0x098fff at 0xffffff8000216000
x86bios: EBDA 0x09e000-0x09ffff at 0xfffffe000009e000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xfe020 00024 (v02 ACRSYS)
ACPI: XSDT 0xb9ff6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 0xb9ff4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 0xb9fe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 0xb9f8d000 00040
ACPI: DMAR 0xb9ff5000 00068 (v01 ? 00000001 00000000)
ACPI: HPET 0xb9ff3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 0xb9ff2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 0xb9ff1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: ASF! 0xb9ff0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 0xb9fe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 0xb9fe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SSDT 0xb9fe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
random: <entropy source, Software, Yarrow>
mem: <memory>
null: <null device, zero device>
kbd: new array size 4
kbd1 at kbdmux0
VESA: INT 0x10 vector 0xc000:0x0014
VESA: information block
0000 56 45 53 41 00 03 00 01 00 99 01 00 00 00 40 00
0010 00 99 ff 03 00 01 33 01 00 99 45 01 00 99 69 01
0020 00 99 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040 60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01
0050 68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01
0060 70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01
0070 07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01
0080 15 01 01 01 03 01 11 01 ff ff 00 00 00 00 00 00
0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100 49 6e 74 65 6c 28 72 29 43 61 6e 74 69 67 61 20
0110 47 72 61 70 68 69 63 73 20 43 68 69 70 20 41 63
0120 63 65 6c 65 72 61 74 65 64 20 56 47 41 20 42 49
0130 4f 53 00 49 6e 74 65 6c 20 43 6f 72 70 6f 72 61
0140 74 69 6f 6e 00 49 6e 74 65 6c 28 72 29 43 61 6e
0150 74 69 67 61 20 47 72 61 70 68 69 63 73 20 43 6f
0160 6e 74 72 6f 6c 6c 65 72 00 48 61 72 64 77 61 72
0170 65 20 56 65 72 73 69 6f 6e 20 30 2e 30 00 00 00
0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 9 mode(s) found
VESA: v3.0, 65472k memory, flags:0x1, mode table:0xffffff8000258040 (99000040)
VESA: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
VESA: Intel Corporation Intel(r)Cantiga Graphics Controller Hardware Version 0.0
io: <I/O>
ctl: CAM Target Layer loaded
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: installed _OSI("Linux")
PCIe: Memory Mapped configuration base @ 0xf8000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
cpu0: Processor \\_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xb9e6fe18 0019F (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 0019F (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0xb9e6e598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
cpu1: Processor \\_PR_.CPU1 (ACPI ID 2) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0xb9e6fc18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0xb9e6df18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Processor \\_PR_.CPU2 (ACPI ID 3) ignored
ACPI: Processor \\_PR_.CPU3 (ACPI ID 4) ignored
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 4 timers, legacy route
hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic
hpet0: t1: irqs 0x00f00000 (0)
hpet0: t2: irqs 0x00f00800 (0)
hpet0: t3: irqs 0x00f01000 (0)
Timecounter "HPET" frequency 14318180 Hz quality 950
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 51
Event timer "i8254" frequency 1193182 Hz quality 100
ACPI timer: 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12
Validation 0 10 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12
Validation 0 255 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12
Validation 0 255 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000000-0xfebfffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a40, revid=0x07
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a42, revid=0x07
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xd0000000, size 22, enabled
pcib0: allocated type 3 (0xd0000000-0xd03fffff) for rid 10 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0x30d0, size 3, enabled
pcib0: allocated type 4 (0x30d0-0x30d7) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2a43, revid=0x07
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xd2400000, size 20, enabled
pcib0: allocated type 3 (0xd2400000-0xd24fffff) for rid 10 of pci0:0:2:1
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x30a0, size 5, enabled
pcib0: allocated type 4 (0x30a0-0x30bf) for rid 20 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x293c, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd4504c00, size 10, enabled
pcib0: allocated type 3 (0xd4504c00-0xd4504fff) for rid 10 of pci0:0:26:7
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd4500000, size 14, enabled
pcib0: allocated type 3 (0xd4500000-0xd4503fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2946, revid=0x03
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x3080, size 5, enabled
pcib0: allocated type 4 (0x3080-0x309f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled
pcib0: allocated type 4 (0x3060-0x307f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled
pcib0: allocated type 4 (0x3040-0x305f) for rid 20 of pci0:0:29:2
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x293a, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd4504800, size 10, enabled
pcib0: allocated type 3 (0xd4504800-0xd4504bff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x2448, revid=0x93
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2917, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2929, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0x30c8, size 3, enabled
pcib0: allocated type 4 (0x30c8-0x30cf) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0x30dc, size 2, enabled
pcib0: allocated type 4 (0x30dc-0x30df) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0x30c0, size 3, enabled
pcib0: allocated type 4 (0x30c0-0x30c7) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0x30d8, size 2, enabled
pcib0: allocated type 4 (0x30d8-0x30db) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled
pcib0: allocated type 4 (0x3020-0x303f) for rid 20 of pci0:0:31:2
map[24]: type Memory, range 32, base 0xd4504000, size 11, enabled
pcib0: allocated type 3 (0xd4504000-0xd45047ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type Memory, range 64, base 0xd4505000, size 8, enabled
pcib0: allocated type 3 (0xd4505000-0xd45050ff) for rid 10 of pci0:0:31:3
map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled
pcib0: allocated type 4 (0x3000-0x301f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0x30d0-0x30d7 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
pcib0: allocated type 3 (0xd0400000-0xd0400fff) for rid 64 of agp0
agp0: Allocated flush page phys 0xd0400000 virt 0xfffffe00d0400000
agp0: aperture size is 256M, detected 65532k stolen memory
agp0: AGP_I965_PGTBL_CTL2: 00000000
agp0: AGP_I855_GCC1: 0x70
agp0: AGP_I965_MSAC: 0x00
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 524288
vgapci1: <VGA-compatible display> mem 0xd2400000-0xd24fffff at device 2.1 on pci0
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib1
pcib0: allocated type 3 (0xd3500000-0xd44fffff) for rid 20 of pcib1
pcib1: failed to allocate initial prefetch window: 0xd0400000-0xd13fffff
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xd3500000-0xd44fffff
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd3500000, size 18, enabled
pcib1: allocated memory range (0xd3500000-0xd353ffff) for rid 10 of pci0:1:0:0
map[18]: type I/O Port, range 32, base 0x2000, size 7, enabled
pcib1: allocated I/O port range (0x2000-0x207f) for rid 18 of pci0:1:0:0
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci1: <network, ethernet> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib2: failed to allocate initial I/O port window: 0x1000-0x1fff
pcib0: allocated type 3 (0xd2500000-0xd34fffff) for rid 20 of pcib2
pcib0: allocated type 3 (0xd1400000-0xd23fffff) for rid 24 of pcib2
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: memory decode 0xd2500000-0xd34fffff
pcib2: prefetched decode 0xd1400000-0xd23fffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x8086, dev=0x0083, revid=0x00
domain=0, bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd2500000, size 13, enabled
pcib2: allocated memory range (0xd2500000-0xd2501fff) for rid 10 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
pci2: <network> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <PCI-PCI bridge> at device 30.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <PCI bus> on pcib3
pci3: domain=0, physical bus=3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9M AHCI SATA controller> port 0x30c8-0x30cf,0x30dc-0x30df,0x30c0-0x30c7,0x30d8-0x30db,0x3020-0x303f mem 0xd4504000-0xd45047ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 52
ahci0: using IRQ 256 for MSI
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL 3Gbps PM PMD SSC PSC 32cmd CCC EM 4ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps:
ahcich2: not probed (disabled)
ahcich3: not probed (disabled)
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps:
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps:
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_wmi0: <ACPI-WMI mapping> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 54
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons
psm0: config:00004000, flags:00000008, packet size:6
psm0: syncmask:c0, syncbits:00
acpi0: wakeup code va 0xffffff8115a69000 pa 0x94000
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
Timecounters tick every 10.000 msec
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
lo0: bpf attached
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA offline status=00000004
ahcich1: AHCI reset: device not found
ahcich4: AHCI reset...
ahcich4: SATA offline status=00000004
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ahcich5: SATA offline status=00000004
ahcich5: AHCI reset: device not found
battery0: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ahcich0: AHCI reset: device ready after 100ms
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD3200BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device
ada0: Serial Number WD-WXH0AB990255
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
GEOM: new disk ada0
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <WDC WD3200BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device
pass0: Serial Number WD-WXH0AB990255
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahciem0 bus 0 scbus4 target 0 lun 0
pass1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/40/0x67<INT,USR,SYS,REA,WRI>
Trying to mount root from ufs:/dev/ada0s4a [rw]...
start_init: trying /sbin/init
Setting hostuuid: 5ebbdf0a-7404-6649-923e-d8412b756885.
Setting hostid: 0x2ffff142.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/ada0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s4a: clean, 11086766 free (146894 frags, 1367484 blocks, 0.9% fragmentation)
/dev/ada0s4f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s4f: clean, 3018409 free (615673 frags, 300342 blocks, 3.8% fragmentation)
/dev/ada0s4g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s4g: clean, 74861005 free (7973 frags, 9356629 blocks, 0.0% fragmentation)
Mounting local file systems:.
Loading kernel modules:
wlan: <802.11 Link Layer>
pci0: driver added
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pci0:0:26:0: reprobing on driver added
found-> vendor=0x8086, dev=0x293c, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=19
powerspec 2 supports D0 D3 current D0
pci0:0:26:7: reprobing on driver added
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=22
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=23
pci0:0:29:0: reprobing on driver added
found-> vendor=0x8086, dev=0x2935, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
pci0:0:29:1: reprobing on driver added
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=16
pci0:0:29:2: reprobing on driver added
found-> vendor=0x8086, dev=0x293a, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=23
powerspec 2 supports D0 D3 current D0
pci0:0:29:7: reprobing on driver added
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
pci0:0:31:3: reprobing on driver added
pci1: driver added
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:1:0:0: reprobing on driver added
pci2: driver added
found-> vendor=0x8086, dev=0x0083, revid=0x00
domain=0, bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=19
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:2:0:0: reprobing on driver added
iwn0: <Intel Centrino Wireless-N 1000> mem 0xd2500000-0xd2501fff irq 19 at device 0.0 on pci2
iwn0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 1 vector 50
iwn0: using IRQ 257 for MSI
iwn0: MIMO 1T2R, BGS, address 00:1e:64:45:f5:64
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 1T2R
iwn0: 11ng MCS 20MHz
iwn0: MCS 0-7: 6.5Mbps - 65Mbps
iwn0: 11ng MCS 20MHz SGI
iwn0: MCS 0-7: 7Mbps - 72Mbps
iwn0: 11ng MCS 40MHz:
iwn0: MCS 0-7: 13.5Mbps - 135Mbps
iwn0: 11ng MCS 40MHz SGI:
iwn0: MCS 0-7: 15Mbps - 150Mbps
pci3: driver added
pci0: driver added
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pci0:0:26:0: reprobing on driver added
found-> vendor=0x8086, dev=0x293c, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=19
powerspec 2 supports D0 D3 current D0
pci0:0:26:7: reprobing on driver added
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4504c00-0xd4504fff irq 19 at device 26.7 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
found-> vendor=0x8086, dev=0x293e, revid=0x03
usbus0: 480Mbps High Speed USB v2.0
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=22
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=23
pci0:0:29:0: reprobing on driver added
found-> vendor=0x8086, dev=0x2935, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
pci0:0:29:1: reprobing on driver added
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=16
pci0:0:29:2: reprobing on driver added
found-> vendor=0x8086, dev=0x293a, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=23
powerspec 2 supports D0 D3 current D0
pci0:0:29:7: reprobing on driver added
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4504800-0xd4504bff irq 23 at device 29.7 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 51
usbus1: EHCI version 1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
usbus1 on ehci1
ehci1: usbpf: Attached
found-> vendor=0x8086, dev=0x2930, revid=0x03
usbus1: 480Mbps High Speed USB v2.0
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
pci0:0:31:3: reprobing on driver added
pci1: driver added
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:1:0:0: reprobing on driver added
pci2: driver added
pci3: driver added
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
pci0: driver added
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pci0:0:26:0: reprobing on driver added
uhci0: <Intel 82801I (ICH9) USB controller> port 0x30a0-0x30bf irq 16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
usbus2 on uhci0
uhci0: usbpf: Attached
found-> vendor=0x8086, dev=0x293e, revid=0x03
usbus2: 12Mbps Full Speed USB v1.0
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=22
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=23
pci0:0:29:0: reprobing on driver added
uhci1: <Intel 82801I (ICH9) USB controller> port 0x3080-0x309f irq 23 at device 29.0 on pci0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3 on uhci1
uhci1: usbpf: Attached
usbus3: found-> vendor=0x8086, dev=0x2935, revid=0x03
12Mbps Full Speed USB v1.0
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
pci0:0:29:1: reprobing on driver added
uhci2: <Intel 82801I (ICH9) USB controller> port 0x3060-0x307f irq 19 at device 29.1 on pci0
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4 on uhci2
uhci2: usbpf: Attached
usbus4: 12Mbps Full Speed USB v1.0
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=16
pci0:0:29:2: reprobing on driver added
uhci3: <Intel 82801I (ICH9) USB controller> port 0x3040-0x305f irq 16 at device 29.2 on pci0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5 on uhci3
uhci3: usbpf: Attached
found-> vendor=0x8086, dev=0x2930, revid=0x03
usbus5: 12Mbps Full Speed USB v1.0
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
pci0:0:31:3: reprobing on driver added
pci1: driver added
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:1:0:0: reprobing on driver added
pci2: driver added
pci3: driver added
uhub2: 2 ports with 2 removable, self powered
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
pci0: driver added
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=22
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
pci0:0:31:3: reprobing on driver added
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x3000-0x301f mem 0xd4505000-0xd45050ff irq 18 at device 31.3 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 52
smbus0: <System Management Bus> on ichsmb0
pci1: driver added
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:1:0:0: reprobing on driver added
pci2: driver added
pci3: driver added
uhub3: 2 ports with 2 removable, self powered
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
pci0: driver added
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=22
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
hdac0: <Intel 82801I HDA Controller> mem 0xd4500000-0xd4503fff irq 22 at device 27.0 on pci0
hdac0: PCI card vendor: 0x1025, device: 0x029b
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 258 to local APIC 0 vector 55
hdac0: using IRQ 258 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pci1: driver added
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:1:0:0: reprobing on driver added
pci2: driver added
pci3: driver added
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x1025029b
hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 18 99a30930 3 0 Mic Fixed ATAPI Onboard Unknown 9
hdaa0: 20 99130110 1 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 21 0321101f 1 15 Headphones Jack 1/8 Left Black 0
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 24 03a19840 4 0 Mic Jack 1/8 Left Pink 8
hdaa0: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 29 4015812d 2 13 Speaker None Optical 0x00 Purple 1
hdaa0: 30 03451120 2 0 SPDIF-out Jack Optical Left Black 1
hdaa0: Patching widget caps nid=29 0x00400000 -> 0x00700000
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 18 99a30930 3 0 Mic Fixed ATAPI Onboard Unknown 9
hdaa0: 20 99130110 1 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 21 0321101f 1 15 Headphones Jack 1/8 Left Black 0
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 24 03a19840 4 0 Mic Jack 1/8 Left Pink 8
hdaa0: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 30 03451120 2 0 SPDIF-out Jack Optical Left Black 1
hdaa0: 4 associations found:
hdaa0: Association 0 (1) out:
hdaa0: Pin nid=20 seq=0
hdaa0: Pin nid=21 seq=15
hdaa0: Association 1 (2) out:
hdaa0: Pin nid=30 seq=0
hdaa0: Association 2 (3) in:
hdaa0: Pin nid=18 seq=0
hdaa0: Association 3 (4) in:
hdaa0: Pin nid=24 seq=0
hdaa0: Tracing association 0 (1)
hdaa0: Pin 20 traced to DAC 2
hdaa0: Pin 21 traced to DAC 2 and hpredir 0
hdaa0: Association 0 (1) trace succeeded
hdaa0: Tracing association 1 (2)
hdaa0: Pin 30 traced to DAC 6
hdaa0: Association 1 (2) trace succeeded
hdaa0: Tracing association 2 (3)
hdaa0: Unable to trace pin 18 to ADC 7, undo traces
hdaa0: Pin 18 traced to ADC 8
hdaa0: Association 2 (3) trace succeeded
hdaa0: Tracing association 3 (4)
hdaa0: Pin 24 traced to ADC 7
hdaa0: Association 3 (4) trace succeeded
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Looking for additional DAC for association 1 (2)
hdaa0: Looking for additional ADC for association 2 (3)
hdaa0: Looking for additional ADC for association 3 (4)
hdaa0: Tracing input monitor
hdaa0: Tracing nid 11 to out
hdaa0: nid 11 is input monitor
hdaa0: Tracing nid 36 to out
hdaa0: Tracing other input monitors
hdaa0: Tracing nid 18 to out
hdaa0: Tracing nid 24 to out
hdaa0: Tracing beeper
hdaa0: Headphones redirection for association 0 nid=21 using unsolicited responses.
hdaa0: Pin sense: nid=21 sence=0x80000000 (connected)
hdaa0: Redirect output to: headphones
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa0
pcm0: Playback:
pcm0: Stream cap: 0x00000001 PCM
pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm0: DAC: 2
pcm0:
pcm0: nid=20 [pin: Speaker (Fixed)]
pcm0: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: nid=21 [pin: Headphones (Black Jack)]
pcm0: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: Record:
pcm0: Stream cap: 0x00000001 PCM
pcm0: PCM cap: 0x000e0160 16 20 24 bits, 44 48 96 KHz
pcm0: ADC: 8
pcm0:
pcm0: nid=8 [audio input]
pcm0: + <- nid=35 [audio selector] [src: speaker, monitor]
pcm0: + <- nid=29 [beep widget] [src: speaker]
pcm0: + <- nid=18 [pin: Mic (Fixed)] [src: monitor]
pcm0:
pcm0: Master Volume (OSS: vol): -63/1dB
pcm0: +- ctl 1 (nid 2 out): -63/1dB (65 steps)
pcm0: +- ctl 10 (nid 12 in 0): mute
pcm0: +- ctl 11 (nid 12 in 1): mute
pcm0: +- ctl 16 (nid 20 in ): mute
pcm0: +- ctl 17 (nid 21 in ): mute
pcm0:
pcm0: PCM Volume (OSS: pcm): -63/1dB
pcm0: +- ctl 1 (nid 2 out): -63/1dB (65 steps)
pcm0: +- ctl 10 (nid 12 in 0): mute
pcm0:
pcm0: Microphone2 Volume (OSS: monitor): -17/29dB
pcm0: +- ctl 4 (nid 8 in 0): -17/29dB (47 steps) + mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker): -17/12dB
pcm0: +- ctl 4 (nid 8 in 0): -17/29dB (47 steps) + mute
pcm0:
pcm0: Recording Level (OSS: rec): -17/29dB
pcm0: +- ctl 4 (nid 8 in 0): -17/29dB (47 steps) + mute
pcm0:
pcm0: Input Mix Level (OSS: mix)
pcm0: +- ctl 11 (nid 12 in 1): mute
pcm0:
pcm0: Input Monitoring Level (OSS: igain): 0/0dB
pcm0: +- ctl 11 (nid 12 in 1): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "monitor":
pcm0: Playback channel set is: Front Left, Front Right,
pcm0: Playback channel matrix is: 2.0 (connected)
pcm0: Automatically set rec source to: monitor
pcm0: Recording channel set is: Front Left, Front Right,
pcm0: Recording channel matrix is: 2.0 (unknown)
pcm1: <Realtek ALC269 (Left Digital)> at nid 30 on hdaa0
pcm1: Playback:
pcm1: Stream cap: 0x00000005 AC3 PCM
pcm1: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz
pcm1: DAC: 6
pcm1:
pcm1: nid=30 [pin: SPDIF-out (Black Jack)]
pcm1: + <- nid=6 [audio output] [src: pcm]
pcm1:
pcm1: Mixer "vol" -> "none": child=0x00000010
pcm1: Mixer "pcm": parent="vol"
pcm1: Soft PCM mixer ENABLED
pcm1: Playback channel set is: Front Left, Front Right,
pcm1: Playback channel matrix is: 2.0 (unknown)
pcm2: <Realtek ALC269 (Left Analog Mic)> at nid 24 on hdaa0
pcm2: Record:
pcm2: Stream cap: 0x00000001 PCM
pcm2: PCM cap: 0x000e0160 16 20 24 bits, 44 48 96 KHz
pcm2: ADC: 7
pcm2:
pcm2: nid=7 [audio input]
pcm2: + <- nid=36 [audio mixer] [src: speaker, mic, mix]
pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm2: + <- nid=29 [beep widget] [src: speaker]
pcm2: + <- nid=11 [audio mixer] [src: mix]
pcm2:
pcm2: Input Mix:
pcm2:
pcm2: nid=11 [audio mixer]
pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm2: + <- nid=29 [beep widget] [src: speaker]
pcm2:
pcm2: Microphone Volume (OSS: mic): 0/30dB
pcm2: +- ctl 5 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm2: +- ctl 20 (nid 24 out): 0/30dB (4 steps)
pcm2: +- ctl 27 (nid 36 in 0): mute
pcm2:
pcm2: Speaker/Beep Volume (OSS: speaker)
pcm2: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute
pcm2: +- ctl 31 (nid 36 in 4): mute
pcm2:
pcm2: Recording Level (OSS: rec): -17/29dB
pcm2: +- ctl 3 (nid 7 in 0): -17/29dB (47 steps) + mute
pcm2: +- ctl 27 (nid 36 in 0): mute
pcm2: +- ctl 31 (nid 36 in 4): mute
pcm2: +- ctl 32 (nid 36 in 5): mute
pcm2:
pcm2: Input Mix Level (OSS: mix): -34/12dB
pcm2: +- ctl 5 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm2: +- ctl 9 (nid 11 in 4): -34/12dB (32 steps) + mute
pcm2: +- ctl 32 (nid 36 in 5): mute
pcm2:
pcm2: Mixer "mic":
pcm2: Mixer "mix":
pcm2: Mixer "rec":
pcm2: Recording channel set is: Front Left, Front Right,
pcm2: Recording channel matrix is: 2.0 (disconnected)
hdacc1: <Intel Cantiga HDA CODEC> at cad 1 on hdac0
hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc1
hdaa1: Subsystem ID: 0x80860101
hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa1: Original pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa1: Patched pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa1: 1 associations found:
hdaa1: Association 0 (1) out:
hdaa1: Pin nid=3 seq=0
hdaa1: Tracing association 0 (1)
hdaa1: Pin 3 traced to DAC 2
hdaa1: Association 0 (1) trace succeeded
hdaa1: Looking for additional DAC for association 0 (1)
hdaa1: Tracing input monitor
hdaa1: Tracing other input monitors
hdaa1: Tracing beeper
hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm3: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1
pcm3: Playback:
pcm3: Stream cap: 0x00000005 AC3 PCM
pcm3: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
pcm3: DAC: 2
pcm3:
pcm3: nid=3 [pin: Digital-out (Jack)]
pcm3: + <- nid=2 [audio output] [src: pcm]
pcm3:
pcm3: Master Volume (OSS: vol): 0/0dB
pcm3: +- ctl 1 (nid 3 in ): mute
pcm3:
pcm3: PCM Volume (OSS: pcm): 0/0dB
pcm3: +- ctl 1 (nid 3 in ): mute
pcm3:
pcm3: Mixer "vol":
pcm3: Mixer "pcm":
pcm3: Soft PCM mixer ENABLED
pcm3: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
uhub5: 2 ports with 2 removable, self powered
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=100
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=100
Cuse4BSD v0.1.26 @ /dev/cuse
Linux ELF exec handler installed
Writing entropy file:.
Setting hostname: bansidhe.pf2.ed.niigata-u.ac.jp.
uhub1: 6 ports with 6 removable, self powered
ugen1.2: <SuYin> at usbus1
Starting Network: lo0 iwn0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:1e:64:45:f5:64
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
Starting devd.
Starting Network: iwn0.
iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:1e:64:45:f5:64
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
Starting Network: iwn0.
iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:1e:64:45:f5:64
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
Starting webcamd.
Attached to ugen1.2[0]
Starting webcamd.
Webcamd is already running for ugen1.2.0
/usr/local/etc/rc.d/webcamd: WARNING: failed to start webcamd
route: writing to routing socket: Network is unreachable
add net default: gateway 172.21.1.22 fib 0: Network is unreachable
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/R/lib /usr/local/lib/alsa-lib /usr/local/lib/compat/pkg /usr/local/lib/event2 /usr/local/lib/ffmpeg-devel /usr/local/lib/gcc46 /usr/local/lib/gegl-0.1 /usr/local/lib/graphviz /usr/local/lib/nss /usr/local/lib/virtualbox
32-bit compatibility ldconfig path: /compat/i386/lib /compat/i386/usr/lib /compat/i386/usr/local/lib /usr/local/lib /usr/local/lib/compat/pkg
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Clearing /tmp (X related).
Starting nfsuserd.
Updating motd:.
Configuring syscons: keymap blanktime.
Starting cron.
Starting nfscbd.
nfslock: pseudo-device
Starting inetd.
Starting background file system checks in 60 seconds.
Mon Dec 17 20:56:02 JST 2012
drm0: <Mobile Intel速 GM45 Express Chipset> on vgapci0
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 259 to local APIC 1 vector 53
vgapci0: using IRQ 259 for MSI
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xc0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
--
kaho at elam.kais.kyoto-u.ac.jp
More information about the freebsd-amd64
mailing list