misc/130103: 7.1-RC X -> systemcrash

Oliver Pinter oliver.pntr at gmail.com
Fri Jan 2 16:20:04 UTC 2009


The following reply was made to PR amd64/130103; it has been noted by GNATS.

From: "Oliver Pinter" <oliver.pntr at gmail.com>
To: "Benjamin Stuppin" <benjamin_stuppin at yahoo.de>
Cc: freebsd-gnats-submit at freebsd.org
Subject: Re: misc/130103: 7.1-RC X -> systemcrash
Date: Fri, 2 Jan 2009 16:46:01 +0100

 Hi,
 
 I have this system:
 ASUS P5Q-E
 Intel Q9300
 Sapphire RHD3450
 4GB RAM
 
 I use FreeBSD 7.1RC2 from csup (20081223) and from
 xorg-video-driver-ati from ports, with this driver worked fine,
 without system  crash, can you the ati driver use?
 
 On 1/2/09, Benjamin Stuppin <benjamin_stuppin at yahoo.de> wrote:
 >
 >>Number:         130103
 >>Category:       misc
 >>Synopsis:       7.1-RC X -> systemcrash
 >>Confidential:   no
 >>Severity:       non-critical
 >>Priority:       low
 >>Responsible:    freebsd-bugs
 >>State:          open
 >>Quarter:
 >>Keywords:
 >>Date-Required:
 >>Class:          sw-bug
 >>Submitter-Id:   current-users
 >>Arrival-Date:   Thu Jan 01 23:30:01 UTC 2009
 >>Closed-Date:
 >>Last-Modified:
 >>Originator:     Benjamin Stuppin
 >>Release:        7.1-RC2 amd64
 >>Organization:
 >>Environment:
 > FreeBSD rechner.local.net 7.1-RC2 FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13
 > UTC 2008     root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > amd64
 >
 >>Description:
 > Hi,
 > when i install FreeBSD 7.1-RC1/2 and install X11 my system hangs up when i
 > startx -> logout -> startx
 > it also hung up after installing drm for radeonhd -> startx -> mplayer
 > <movie> -> fullscreen -> normal mode
 >
 > The System freezes so i can't do anything (lack another pc to test if only x
 > runs but sometime i also saw a kernel panic message when i was on terminal 1
 > during a crash).
 >
 > I tryed it doing a installation from 7.1-RC DVD, all software installed from
 > DVD. (Full install X-Devel)
 > Also tryed minimal installation -> freebsd-update -> ports from cvs -> build
 > everything from source.
 > Also tryed radeon/radeonhd/ati drivers for my r5xx based ati card.
 >
 > 7.0 runs fine
 >
 > System:
 > Intel Core2quad Q6700
 > Asus P5K SP/EPU
 > Ati Radeon x1300 (pcie)
 >
 > dmesg:
 >
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4282462208 (4084 MB)
 > avail memory  = 4121108480 (3930 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > hptrr: HPT RocketRAID controller driver v1.1 (Jan  1 2009 21:10:24)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est0 attach returned 6
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est1 attach returned 6
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est2 attach returned 6
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est3 attach returned 6
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pcm0: <Intel 82801I High Definition Audio Controller> mem
 > 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0
 > pcm0: [ITHREAD]
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on
 > pci4
 > bktr0: [GIANT-LOCKED]
 > bktr0: [ITHREAD]
 > bktr0: Hauppauge Model 61344 D221
 > bktr0: Detected a MSP3415D-A2 at 0x80
 > bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo,
 > remote control.
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > hptrr: no controller detected.
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > pcm0: <HDA Codec: Realtek ALC883>
 > pcm0: <HDA Driver Revision: 20071129_0050>
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #2 Launched!
 > SMP: AP CPU #3 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > GEOM_LABEL: Label for provider acd0 is iso9660/CANOSCAN.
 > Trying to mount root from ufs:/dev/ad8s1a
 > WARNING: / was not properly dismounted
 > WARNING: /tmp was not properly dismounted
 > WARNING: /usr was not properly dismounted
 > WARNING: /var was not properly dismounted
 > WARNING: /lager was not properly dismounted
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > pid 749 (hald-addon-mouse-sy), uid 0: exited on signal 11 (core dumped)
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.0-RELEASE-p7 #1: Thu Jan  1 21:10:29 CET 2009
 >     root at rechner.local.net:/usr/obj/usr/src/sys/VEGA
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.77-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4282462208 (4084 MB)
 > avail memory  = 4121108480 (3930 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > hptrr: HPT RocketRAID controller driver v1.1 (Jan  1 2009 21:10:24)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est0 attach returned 6
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est1 attach returned 6
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est2 attach returned 6
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est3 attach returned 6
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pcm0: <Intel 82801I High Definition Audio Controller> mem
 > 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0
 > pcm0: [ITHREAD]
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on
 > pci4
 > bktr0: [GIANT-LOCKED]
 > bktr0: [ITHREAD]
 > bktr0: Hauppauge Model 61344 D221
 > bktr0: Detected a MSP3415D-A2 at 0x80
 > bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo,
 > remote control.
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > hptrr: no controller detected.
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > pcm0: <HDA Codec: Realtek ALC883>
 > pcm0: <HDA Driver Revision: 20071129_0050>
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #2 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > Trying to mount root from ufs:/dev/ad8s1a
 > WARNING: / was not properly dismounted
 > WARNING: /tmp was not properly dismounted
 > WARNING: /usr was not properly dismounted
 > WARNING: /var was not properly dismounted
 > WARNING: /lager was not properly dismounted
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > KLD radeon.ko: depends on drm - not available
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol DRM_MEM_DRIVER undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol DRM_MEM_DRIVER undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
 >     root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.78-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4276789248 (4078 MB)
 > avail memory  = 4115329024 (3924 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pci0: <multimedia> at device 27.0 (no driver attached)
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > pci4: <multimedia, video> at device 1.0 (no driver attached)
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80c6fd98
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #2 Launched!
 > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > Trying to mount root from ufs:/dev/md0
 > Waiting (max 60 seconds) for system process `vnlru' to stop...done
 > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
 > Waiting (max
 >  S6y0n csiencgo nddiss)k sf,o rv nsoydsetse mr epmraoicneisnsg .`.s.ynce9r '
 > to stop...9 4 0 0 0 done
 > All buffers synced.
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
 >     root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.77-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4280983552 (4082 MB)
 > avail memory  = 4119531520 (3928 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pci0: <multimedia> at device 27.0 (no driver attached)
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > pci4: <multimedia, video> at device 1.0 (no driver attached)
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #2 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
 > Trying to mount root from ufs:/dev/ad8s1a
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
 >     root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.78-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4280983552 (4082 MB)
 > avail memory  = 4119531520 (3928 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > umass0: <TOSHIBA TransMemory, class 0/0, rev 2.00/1.10, addr 2> on uhub3
 > pci0: <multimedia> at device 27.0 (no driver attached)
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > pci4: <multimedia, video> at device 1.0 (no driver attached)
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass1: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #2 Launched!
 > SMP: AP CPU #1 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <TOSHIBA TransMemory 5.00> Removable Direct Access SCSI-0 device
 > da0: 40.000MB/s transfers
 > da0: 3823MB (7830528 512 byte sectors: 255H 63S/T 487C)
 > da1 at umass-sim1 bus 1 target 0 lun 0
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim1 bus 1 target 0 lun 1
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim1 bus 1 target 0 lun 2
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > da4 at umass-sim1 bus 1 target 0 lun 3
 > da4: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da4: 1.000MB/s transfers
 > da4: Attempt to query device size failed: NOT READY, Medium not present
 > GEOM_LABEL: Label for provider da0s1 is msdosfs/4GB.
 > Trying to mount root from ufs:/dev/ad8s1a
 > WARNING: / was not properly dismounted
 > WARNING: /tmp was not properly dismounted
 > /tmp: mount pending error: blocks 0 files 1
 > WARNING: /usr was not properly dismounted
 > WARNING: /var was not properly dismounted
 > /var: mount pending error: blocks 4 files 2
 > GEOM_LABEL: Label msdosfs/4GB removed.
 >
 >>How-To-Repeat:
 > Install everyting (+X) from dvd -> startx -> logout -> startx
 >
 >>Fix:
 >
 >
 >>Release-Note:
 >>Audit-Trail:
 >>Unformatted:
 > _______________________________________________
 > freebsd-bugs at freebsd.org mailing list
 > http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
 > To unsubscribe, send any mail to "freebsd-bugs-unsubscribe at freebsd.org"
 >


More information about the freebsd-amd64 mailing list