Success with Supermicro H8DIi+-F motherboard?

[Michael Fuckner]

Michael Fuckner wrote:
> Albert Chin wrote:
>> Anyone running 7.2/8.0 (7.2 preferable) on this motherboard with any
>> success? It's using the AMD SR5690 + SP5100 Chipset.

> The SATA-Controller is 1002:4391 (set to AHCI-Mode). This ID was 
> introduced in 1.1.2.10 of ahci.c 
> (http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/ahci/ahci.c)
> 
> I am not exactly sure if this Version is on the 8.0-RELEASE-CD, but I'll 
> boot this CD on Monday.
I had an 8.0-RC1 here and it boots- see dmesg. I'll try 7.2 in the 
afternoon.

Regards,
  Michael!


-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC 2009
    root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Quad-Core AMD Opteron(tm) Processor 2378 (2400.02-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f42  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  TSC: P-state invariant
real memory  = 17179869184 (16384 MB)
avail memory = 16562884608 (15795 MB)
ACPI APIC Table: <112609 APIC0945>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.1 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xd800-0xd81f mem 0xfdee0000-0xfdefffff,0xfdedc000-0xfdedffff irq 17 at device 0.0 on pci4
em0: Using MSIX interrupts
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:30:48:bc:83:46
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xe800-0xe81f mem 0xfdfe0000-0xfdffffff,0xfdfdc000-0xfdfdffff irq 18 at device 0.0 on pci5
em1: Using MSIX interrupts
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: Ethernet address: 00:30:48:bc:83:47
ahci0: <AHCI controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfddff800-0xfddffbff irq 22 at device 17.0 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfddfe000-0xfddfefff irq 16 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfddfd000-0xfddfdfff irq 16 at device 18.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfddff000-0xfddff0ff irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xfddfc000-0xfddfcfff irq 18 at device 19.0 on pci0
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfddf7000-0xfddf7fff irq 18 at device 19.1 on pci0
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfddf6800-0xfddf68ff irq 19 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xfebfc000-0xfebfffff,0xfe000000-0xfe7fffff irq 20 at device 4.0 on pci6
ohci4: <OHCI (generic) USB controller> mem 0xfddf5000-0xfddf5fff irq 18 at device 20.5 on pci0
ohci4: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci4
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ACPI Warning: \\_SB_.PCI0.SBRG.FDC_._FDE: Return type mismatch - found Package, expected Buffer 20090521 nspredef-1051
fdc1: <floppy drive controller (FDE)> port 0-0x5,0x7 drq 2 on acpi0
fdc1: cannot reserve interrupt line
device_attach: fdc1 attach returned 6
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
uart2: [FILTER]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
fdc1: <floppy drive controller (FDE)> port 0-0x5,0x7 drq 2 on acpi0
fdc1: cannot reserve interrupt line
device_attach: fdc1 attach returned 6
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
acd0: DMA limited to UDMA33, device found non-ATA66 cable
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
acd0: DVDR <HL-DT-ST DVDRAM GH22NS50/TN01> at ata0-slave UDMA33
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
(aprobe0:ahcich0:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
(aprobe1:ahcich1:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
ada0 at ahcich0 bus 0 target 0 lun 0
ada0: <ST3500320NS SN06> ATA/ATAPI-8 SATA 1.x device
ada0: 150.000MB/s transfers
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
ada1 at ahcich1 bus 0 target 0 lun 0
ada1: <ST3500320NS SN06> ATA/ATAPI-8 SATA 1.x device
ada1: 150.000MB/s transfers
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/ada0s1a
em0: link state changed to UP