amd64/128686: can't detect SATA Disk on 8.0-Current with NF550
Rainer Hurling
rhurlin at gwdg.de
Sat Nov 8 02:43:56 PST 2008
Hello Søren, hello Jeremy,
Søren Schmidt schrieb:
> On 8Nov, 2008, at 9:24 , Jeremy Chadwick wrote:
>
>> Apologies for top-posting.
>
> Well, I dunno of any problems (yet), I'll dig out my only nVidia system
> when time permits and see if anything shows up there..
>
> -Søren
>
>>
>>
>> Soren, is this a known regression in CURRENT? (Possibly related to the
>> modularisation of the ata(4) chipset pieces?)
>>
>> --
>> | Jeremy Chadwick jdc at parodius.com |
>> | Parodius Networking http://www.parodius.com/ |
>> | UNIX Systems Administrator Mountain View, CA, USA |
>> | Making life hard for others since 1977. PGP: 4BD6C0CB |
>>
>> On Sat, Nov 08, 2008 at 08:20:39AM +0100, Rainer Hurling wrote:
>>> Same here.
>>>
>>> With older kernel (april 2008) under amd64 (CURRENT) all disks are
>>> found, with actual kernels not. So I am not able to boot any
>>> more('Trying to mount root ...').
>>>
>>> This error came in some weeks ago. I found no time to analyse and
>>> report. With i386 mode on the same system there are no problems.
>>>
>>>
>>> dmesg shows older nvidia chipset:
>>> atapci0: <nVidia nForce MCP55 UDMA133 controller> port
>>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4
>>> .0 on pci0
>>> ata0: <ATA channel 0> on atapci0
>>> ata0: [ITHREAD]
>>> ata1: <ATA channel 1> on atapci0
>>> ata1: [ITHREAD]
>>> atapci1: <nVidia nForce MCP55 SATA300 controller> port
>>> 0xc480-0xc487,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc0f
>>> mem 0xfbef9000-0xfbef9fff irq 23 at device 5.0 on pci0
>>> atapci1: [ITHREAD]
>>> ata2: <ATA channel 0> on atapci1
>>> ata2: [ITHREAD]
>>> ata3: <ATA channel 1> on atapci1
>>> ata3: [ITHREAD]
>>> atapci2: <nVidia nForce MCP55 SATA300 controller> port
>>> 0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb08f
>>> mem 0xfbef8000-0xfbef8fff irq 20 at device 5.1 on pci0
>>> atapci2: [ITHREAD]
>>> ata4: <ATA channel 0> on atapci2
>>> ata4: [ITHREAD]
>>> ata5: <ATA channel 1> on atapci2
>>> ata5: [ITHREAD]
>>>
>>>
>>> Tell me if I can help.
>>>
>>> Thank you,
>>> Rainer
>>>
>>>
>>> On 08.11.2008 01:43 (UTC+1), Hans wrote:
>>>>> Number: 128686
>>>>> Category: amd64
>>>>> Synopsis: can't detect SATA Disk on 8.0-Current with NF550
>>>>> Confidential: no
>>>>> Severity: critical
>>>>> Priority: low
>>>>> Responsible: freebsd-amd64
>>>>> State: open
>>>>> Quarter: Keywords: Date-Required:
>>>>> Class: sw-bug
>>>>> Submitter-Id: current-users
>>>>> Arrival-Date: Sat Nov 08 00:50:01 UTC 2008
>>>>> Closed-Date:
>>>>> Last-Modified:
>>>>> Originator: Hans
>>>>> Release: 8.0-Current
>>>>> Organization:
>>>>> Environment:
>>>>> Description:
>>>> i had today update current kernel after reboot than failed detect disk
>>>> but few month ago kernel not problem
>>>>
>>>> pciconv -l -v
>>>>
>>>> none0 at pci0:0:0:0: class=0x050000 card=0xcb8410de chip=0x036910de
>>>> rev=0xa1 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 Memory Controller'
>>>> class = memory
>>>> subclass = RAM
>>>> isab0 at pci0:0:1:0: class=0x060100 card=0xcb8410de chip=0x036010de
>>>> rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 LPC Bridge'
>>>> class = bridge
>>>> subclass = PCI-ISA
>>>> none1 at pci0:0:1:1: class=0x0c0500 card=0xcb8410de chip=0x036810de
>>>> rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 SMBus'
>>>> class = serial bus
>>>> subclass = SMBus
>>>> ohci0 at pci0:0:2:0: class=0x0c0310 card=0xcb8410de chip=0x036c10de
>>>> rev=0xa1 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 USB Controller'
>>>> class = serial bus
>>>> subclass = USB
>>>> ehci0 at pci0:0:2:1: class=0x0c0320 card=0xcb8410de chip=0x036d10de
>>>> rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 USB Controller'
>>>> class = serial bus
>>>> subclass = USB
>>>> atapci0 at pci0:0:4:0: class=0x01018a card=0xcb8410de
>>>> chip=0x036e10de rev=0xa1 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 IDE'
>>>> class = mass storage
>>>> subclass = ATA
>>>> atapci1 at pci0:0:5:0: class=0x010185 card=0xcb8410de
>>>> chip=0x037f10de rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 SATA Controller'
>>>> class = mass storage
>>>> subclass = ATA
>>>> atapci2 at pci0:0:5:1: class=0x010185 card=0xcb8410de
>>>> chip=0x037f10de rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 SATA Controller'
>>>> class = mass storage
>>>> subclass = ATA
>>>> atapci3 at pci0:0:5:2: class=0x010185 card=0xcb8410de
>>>> chip=0x037f10de rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 SATA Controller'
>>>> class = mass storage
>>>> subclass = ATA
>>>> pcib1 at pci0:0:6:0: class=0x060401 card=0xcb8410de chip=0x037010de
>>>> rev=0xa2 hdr=0x01
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 PCI bridge'
>>>> class = bridge
>>>> subclass = PCI-PCI
>>>> none2 at pci0:0:6:1: class=0x040300 card=0x889116f3 chip=0x037110de
>>>> rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'ADI 1988B 8 Channel High Definition Audio'
>>>> class = multimedia
>>>> subclass = HDA
>>>> nfe0 at pci0:0:8:0: class=0x068000 card=0xcb8410de chip=0x037310de
>>>> rev=0xa2 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 Ethernet'
>>>> class = bridge
>>>> pcib2 at pci0:0:10:0: class=0x060400 card=0x000010de chip=0x037610de
>>>> rev=0xa2 hdr=0x01
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 PCIe bridge'
>>>> class = bridge
>>>> subclass = PCI-PCI
>>>> pcib3 at pci0:0:11:0: class=0x060400 card=0x000010de chip=0x037410de
>>>> rev=0xa2 hdr=0x01
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 PCIe bridge'
>>>> class = bridge
>>>> subclass = PCI-PCI
>>>> pcib4 at pci0:0:12:0: class=0x060400 card=0x000010de chip=0x037410de
>>>> rev=0xa2 hdr=0x01
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 PCIe bridge'
>>>> class = bridge
>>>> subclass = PCI-PCI
>>>> pcib5 at pci0:0:13:0: class=0x060400 card=0x000010de chip=0x037810de
>>>> rev=0xa2 hdr=0x01
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 PCIe bridge'
>>>> class = bridge
>>>> subclass = PCI-PCI
>>>> pcib6 at pci0:0:14:0: class=0x060400 card=0x000010de chip=0x037510de
>>>> rev=0xa2 hdr=0x01
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 PCIe bridge'
>>>> class = bridge
>>>> subclass = PCI-PCI
>>>> pcib7 at pci0:0:15:0: class=0x060400 card=0x000010de chip=0x037710de
>>>> rev=0xa2 hdr=0x01
>>>> vendor = 'Nvidia Corp'
>>>> device = 'MCP55 PCIe bridge'
>>>> class = bridge
>>>> subclass = PCI-PCI
>>>> hostb0 at pci0:0:24:0: class=0x060000 card=0x00000000
>>>> chip=0x11001022 rev=0x00 hdr=0x00
>>>> vendor = 'Advanced Micro Devices (AMD)'
>>>> device = '(K8) Athlon 64/Opteron HyperTransport Technology
>>>> Configuration'
>>>> class = bridge
>>>> subclass = HOST-PCI
>>>> hostb1 at pci0:0:24:1: class=0x060000 card=0x00000000
>>>> chip=0x11011022 rev=0x00 hdr=0x00
>>>> vendor = 'Advanced Micro Devices (AMD)'
>>>> device = '(K8) Athlon 64/Opteron Address Map'
>>>> class = bridge
>>>> subclass = HOST-PCI
>>>> hostb2 at pci0:0:24:2: class=0x060000 card=0x00000000
>>>> chip=0x11021022 rev=0x00 hdr=0x00
>>>> vendor = 'Advanced Micro Devices (AMD)'
>>>> device = '(K8) Athlon 64/Opteron DRAM Controller'
>>>> class = bridge
>>>> subclass = HOST-PCI
>>>> hostb3 at pci0:0:24:3: class=0x060000 card=0x00000000
>>>> chip=0x11031022 rev=0x00 hdr=0x00
>>>> vendor = 'Advanced Micro Devices (AMD)'
>>>> device = '(K8) Athlon 64/Opteron Miscellaneous Control'
>>>> class = bridge
>>>> subclass = HOST-PCI
>>>> none3 at pci0:1:7:0: class=0x040000 card=0x046219b8 chip=0x880014f1
>>>> rev=0x05 hdr=0x00
>>>> vendor = 'Conexant Systems, Inc.'
>>>> device = '23880 Conexant 23880 Video Capture (NTSC)'
>>>> class = multimedia
>>>> subclass = video
>>>> none4 at pci0:1:7:1: class=0x048000 card=0x046219b8 chip=0x881114f1
>>>> rev=0x05 hdr=0x00
>>>> vendor = 'Conexant Systems, Inc.'
>>>> device = 'CX2388x TV Capture Chip'
>>>> class = multimedia
>>>> none5 at pci0:1:7:2: class=0x048000 card=0x046219b8 chip=0x880214f1
>>>> rev=0x05 hdr=0x00
>>>> vendor = 'Conexant Systems, Inc.'
>>>> device = 'CX2388x TV Capture Chip'
>>>> class = multimedia
>>>> none6 at pci0:1:9:0: class=0x0c0010 card=0x30441106 chip=0x30441106
>>>> rev=0x80 hdr=0x00
>>>> vendor = 'VIA Technologies Inc'
>>>> device = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer
>>>> Controller'
>>>> class = serial bus
>>>> subclass = FireWire
>>>> vgapci0 at pci0:7:0:0: class=0x030000 card=0x00000000
>>>> chip=0x040210de rev=0xa1 hdr=0x00
>>>> vendor = 'Nvidia Corp'
>>>> device = 'GeForce 8600 GT'
>>>> class = display
>>>> subclass = VGA
>>>>
>>>>> How-To-Repeat:
>>>>
>>>>> Fix:
>>>>
>>>>
>>>>> Release-Note:
>>>>> Audit-Trail:
>>>>> Unformatted:
>>>
>>> _______________________________________________
>>> freebsd-amd64 at freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
>>> To unsubscribe, send any mail to "freebsd-amd64-unsubscribe at freebsd.org"
>>
>>
>>
>
> -Søren
thank you for taking this up. I build todays amd64 and when booting
verbose I get the following messages:
-----------------------------
...
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6, 0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing inpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 Controller> port
0xc480-0xc487,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc0f
mem 0xfbef9000-0xfbef9fff irq 23 at device 5.0 on pci 0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbc00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfbef9000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc480
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc400
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc080
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc000
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 stat1=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb08f
mem 0xfbef8000-0xfbef8fff irq 20 at device 5.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb080
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 52
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfbef8000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb880
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb800
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb480
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb400
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
...
ata0: identify ch->devices=00010000
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0 ...
...
ata1: identify ch->devices=00000000
ata2: identify ch->devices=00000001
ata2: reiniting channel ..
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=58 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: reinit done ..
ata2: reiniting channel ..
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=58 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: reinit done ..
ata3: identify ch->devices=00000001
ata3: reiniting channel ..
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: reinit done ..
...
ata3: reiniting channel ..
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: reinit done ..
ata4: identify ch->devices=00000000
ata5: identify ch->devices=00000000
...
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
-----------------------------
It seems that ata(4) is not able to initiating the SATA drives correct?
BTW, this is a 4GByte system.
Rainer
More information about the freebsd-amd64
mailing list