amd64/123978: Most recent amd64 7-Stable doesn't kick 2nd CPU.
Akihiro SHIMIZU
akihiro at personal.email.ne.jp
Mon May 26 13:10:05 UTC 2008
The following reply was made to PR amd64/123978; it has been noted by GNATS.
From: Akihiro SHIMIZU <akihiro at personal.email.ne.jp>
To: bruce at cran.org.uk
Cc: bug-followup at FreeBSD.org, akihiro at personal.email.ne.jp
Subject: Re: amd64/123978: Most recent amd64 7-Stable doesn't kick 2nd CPU.
Date: Mon, 26 May 2008 21:36:07 +0900 (JST)
From: Bruce Cran <bruce at cran.org.uk>
Subject: Re: amd64/123978: Most recent amd64 7-Stable doesn't kick 2nd CPU.
Date: Sun, 25 May 2008 18:43:21 +0100
> Could you provide a verbose dmesg (boot -v at the loader) please?
>
> --
> Bruce Cran
>
Thank you for your response. the verbose dmesg is:
---
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 2 1 1 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #0: Sun May 25 18:27:40 JST 2008
root at opserv.homev6.jp:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c2d000.
Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xffffffff80c2d1d0.
Calibrating clock(s) ... i8254 clock: 1193243 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2200016052 Hz
CPU: AMD Athlon(tm) 64 Processor 3500+ (2200.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 4281729024 (4083 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000d2b000 - 0x00000000d789bfff, 3602321408 bytes (879473 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory = 4128231424 (3936 MB)
ACPI APIC Table: <HP ML115 G1>
APIC: CPU 0 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ACPI: RSDP @ 0x0xf8f60/0x0024 (v 2 HP )
ACPI: XSDT @ 0x0xdfff0100/0x005C (v 1 HP ML115 G1 0x12000712 FOXC 0x00000097)
ACPI: FACP @ 0x0xdfff0290/0x00F4 (v 3 HP ML115 G1 0x12000712 FOXC 0x00000097)
ACPI: DSDT @ 0x0xdfff04d0/0x45C7 (v 1 HP ML115 G1 0x00000100 INTL 0x20051117)
ACPI: FACS @ 0x0xdfffe000/0x0040
ACPI: APIC @ 0x0xdfff0390/0x0070 (v 1 HP ML115 G1 0x12000712 FOXC 0x00000097)
ACPI: MCFG @ 0x0xdfff0450/0x003C (v 1 HP ML115 G1 0x12000712 FOXC 0x00000097)
ACPI: SPMI @ 0x0xdfff0490/0x003D (v 1 HP ML115 G1 0x12000712 FOXC 0x00000097)
ACPI: OEMB @ 0x0xdfffe040/0x0060 (v 1 HP ML115 G1 0x12000712 FOXC 0x00000097)
ACPI: HPET @ 0x0xdfff4aa0/0x0038 (v 1 HP ML115 G1 0x12000712 FOXC 0x00000097)
ACPI: SSDT @ 0x0xdfff4ae0/0x0115 (v 1 HP ML115 G1 0x00000001 FOXC 0x00000001)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 25 2008 18:24:02)
acpi0: <HP ML115 G1> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0
acpi0: reservation of d0000000, 10000000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x0369, revid=0xa2
domain=0, bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0360, revid=0xa3
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x2f00, size 7, enabled
found-> vendor=0x10de, dev=0x0368, revid=0xa3
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xe880, size 6, enabled
map[20]: type I/O Port, range 32, base 0x2d00, size 6, enabled
map[24]: type I/O Port, range 32, base 0x2e00, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0)
pci_link13: Picked IRQ 20 with weight 0
pcib0: slot 1 INTA routed to irq 20 via \\_SB_.LSMB
found-> vendor=0x10de, dev=0x036c, revid=0xa1
domain=0, bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfcfbf000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0)
pci_link8: Picked IRQ 21 with weight 0
pcib0: slot 2 INTA routed to irq 21 via \\_SB_.LUB0
found-> vendor=0x10de, dev=0x036d, revid=0xa2
domain=0, bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfcfbec00, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0)
pci_link10: Picked IRQ 22 with weight 0
pcib0: slot 2 INTB routed to irq 22 via \\_SB_.LUB2
found-> vendor=0x10de, dev=0x036e, revid=0xa1
domain=0, bus=0, slot=4, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=0
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xe400, size 3, enabled
map[14]: type I/O Port, range 32, base 0xe080, size 2, enabled
map[18]: type I/O Port, range 32, base 0xe000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd880, size 4, enabled
map[24]: type Memory, range 32, base 0xfcfbd000, size 12, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0)
pci_link15: Picked IRQ 23 with weight 0
pcib0: slot 5 INTA routed to irq 23 via \\_SB_.LSA0
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=1
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xd800, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd480, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd400, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd080, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd000, size 4, enabled
map[24]: type Memory, range 32, base 0xfcfbc000, size 12, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0)
pci_link16: Picked IRQ 20 with weight 1
pcib0: slot 5 INTB routed to irq 20 via \\_SB_.LSA1
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=2
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xcc00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xc880, size 2, enabled
map[18]: type I/O Port, range 32, base 0xc800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xc480, size 2, enabled
map[20]: type I/O Port, range 32, base 0xc400, size 4, enabled
map[24]: type Memory, range 32, base 0xfcfbb000, size 12, enabled
pcib0: matched entry for 0.5.INTC (src \\_SB_.LSA2:0)
pci_link18: Picked IRQ 21 with weight 1
pcib0: slot 5 INTC routed to irq 21 via \\_SB_.LSA2
found-> vendor=0x10de, dev=0x0370, revid=0xa2
domain=0, bus=0, slot=6, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0376, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0378, revid=0xa3
domain=0, bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0375, revid=0xa3
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0377, revid=0xa3
domain=0, bus=0, slot=15, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfcfbf000-0xfcfbffff irq 21 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfcfbf000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcfbec00-0xfcfbecff irq 22 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfcfbec00
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xe400-0xe407,0xe080-0xe083,0xe000-0xe007,0xdc00-0xdc03,0xd880-0xd88f mem 0xfcfbd000-0xfcfbdfff irq 23 at device 5.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd880
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcfbd000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe400
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe080
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe000
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xdc00
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xd800-0xd807,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xd000-0xd00f mem 0xfcfbc000-0xfcfbcfff irq 20 at device 5.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcfbc000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd480
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd400
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd080
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfcfbb000-0xfcfbbfff irq 21 at device 5.2 on pci0
atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
atapci3: [MPSAFE]
atapci3: [ITHREAD]
atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfcfbb000
ata6: <ATA channel 0> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc480
ata7: SATA connect status=00000000
ata7: [MPSAFE]
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <PCI-PCI bridge> at device 11.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <PCI-PCI bridge> at device 12.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pci4: <PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfd000000-0xfdefffff
pcib5: prefetched decode 0xfb000000-0xfbffffff
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x102b, dev=0x0522, revid=0x02
domain=0, bus=5, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Prefetchable Memory, range 32, base 0xfb000000, size 24, enabled
pcib5: requested memory range 0xfb000000-0xfbffffff: good
map[14]: type Memory, range 32, base 0xfdefc000, size 14, enabled
pcib5: requested memory range 0xfdefc000-0xfdefffff: good
map[18]: type Memory, range 32, base 0xfd000000, size 23, enabled
pcib5: requested memory range 0xfd000000-0xfd7fffff: good
pcib5: matched entry for 5.0.INTA (src \\_SB_.LNED:0)
pci_link7: Picked IRQ 16 with weight 0
pcib5: slot 0 INTA routed to irq 16 via \\_SB_.LNED
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfdefc000-0xfdefffff,0xfd000000-0xfd7fffff irq 16 at device 0.0 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0xfdf00000-0xfdffffff
pcib6: no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
found-> vendor=0x14e4, dev=0x1659, revid=0x21
domain=0, bus=6, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xfdff0000, size 16, enabled
pcib6: requested memory range 0xfdff0000-0xfdffffff: good
pcib6: matched entry for 6.0.INTA (src \\_SB_.LNEC:0)
pci_link6: Picked IRQ 17 with weight 0
pcib6: slot 0 INTA routed to irq 17 via \\_SB_.LNEC
bge0: <HP NC320i Integrated Gigabit Server Adapter, ASIC rev. 0x4201> mem 0xfdff0000-0xfdffffff irq 17 at device 0.0 on pci6
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdff0000
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to vector 56
bge0: using IRQ 256 for MSI
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0018, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1e:0b:73:fe:ae
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0x0-0x0
pcib7: no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio0: [FILTER]
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ex_isa_identify()
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 238312 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100000730 hz
Timecounter "TSC" frequency 2200016052 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 305244MB <Seagate ST3320620AS 3.AAK> at ata2-master SATA300
ad4: 625140335 sectors [620178C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 305245MB <Seagate ST3320620AS 3.AAK> at ata3-master SATA300
ad6: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
ad6: nVidia check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
GEOM: new disk ad6
ad6: FreeBSD check1 failed
ATA PseudoRAID loaded
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
Trying to mount root from ufs:/dev/mirror/gm0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
bge0: link UP
splash: image decoder found: green_saver
---
Thanks in advance.
Akihiro SHIMIZU
More information about the freebsd-amd64
mailing list