amd64/117316: ACPI lockups on SuperMicro motherboard
Lawrence Farr
freebsd-smp at epcdirect.co.uk
Fri Oct 19 09:40:02 PDT 2007
The following reply was made to PR amd64/117316; it has been noted by GNATS.
From: "Lawrence Farr" <freebsd-smp at epcdirect.co.uk>
To: "'Doichin Dokov'" <root at net1.cc>,
<freebsd-gnats-submit at FreeBSD.org>
Cc:
Subject: RE: amd64/117316: ACPI lockups on SuperMicro motherboard
Date: Fri, 19 Oct 2007 17:17:51 +0100
> -----Original Message-----
> From: owner-freebsd-amd64 at freebsd.org [mailto:owner-freebsd-
> amd64 at freebsd.org] On Behalf Of Doichin Dokov
> Sent: 19 October 2007 00:59
> To: freebsd-gnats-submit at FreeBSD.org
> Subject: amd64/117316: ACPI lockups on SuperMicro motherboard
>
>
> >Number: 117316
> >Category: amd64
> >Synopsis: ACPI lockups on SuperMicro motherboard
> >Confidential: no
> >Severity: critical
> >Priority: high
> >Responsible: freebsd-amd64
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: sw-bug
> >Submitter-Id: current-users
> >Arrival-Date: Fri Oct 19 00:00:06 UTC 2007
> >Closed-Date:
> >Last-Modified:
> >Originator: Doichin Dokov
> >Release: RELENG_7
> >Organization:
> NetOne
> >Environment:
> FreeBSD 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #0: Thu Oct 18 21:14:22
> UTC 2007 root@:/usr/src/sys/amd64/compile/NETONE amd64
> >Description:
> FreeBSD 7.0-PRERELEASE #0: Thu Oct 18 21:14:22 UTC 2007
> root@:/usr/src/sys/amd64/compile/NETONE
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Dual-Core AMD Opteron(tm) Processor 1210 (1795.51-MHz K8-class
> CPU)
> Origin = "AuthenticAMD" Id = 0x40f32 Stepping = 2
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
> E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> Features2=0x2001<SSE3,CX16>
> AMD
> Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
> Cores per package: 2
> usable memory = 1064964096 (1015 MB)
> avail memory = 1026363392 (978 MB)
> ACPI APIC Table: <A M I OEMAPIC >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> ioapic2 <Version 1.1> irqs 32-47 on motherboard
> kbd1 at kbdmux0
> acpi0: <A M I OEMXSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: Sleep Button (fixed)
> acpi0: reservation of 540, 20 (4) failed
> acpi0: reservation of 500, 20 (4) failed
> acpi0: reservation of 560, 20 (4) failed
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 3ff00000 (3) failed
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> twe0: <3ware Storage Controller. Driver version 1.50.01.002> port
> 0xbc00-0xbc0f mem 0xfeaffc00-0xfeaffc0f,0xfe000000-0xfe7fffff irq 20 at
> device 1.0 on pci2
> twe0: [GIANT-LOCKED]
> twe0: [ITHREAD]
> twe0: AEN: <twe0: incomplete unit for unknown unit 1>
> twe0: AEN: <twe0: degraded unit for unknown unit 1>
> twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
> pci0:2:3:0: bad VPD cksum, remain 14
> bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
> 0x2100> mem 0xfead0000-0xfeadffff irq 24 at device 3.0 on pci2
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge0: Ethernet address: 00:30:48:57:c3:80
> bge0: [ITHREAD]
> pci0:2:3:1: bad VPD cksum, remain 14
> bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
> 0x2100> mem 0xfeac0000-0xfeacffff irq 25 at device 3.1 on pci2
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge1: Ethernet address: 00:30:48:57:c3:81
> bge1: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 2.2 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, USB> at device 3.0 (no driver attached)
> pci0: <serial bus, USB> at device 3.1 (no driver attached)
> pci0: <serial bus, USB> at device 3.2 (no driver attached)
> vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xf0000000-
> 0xf7ffffff,0xfebf0000-0xfebfffff at device 5.0 on pci0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model IntelliMouse Explorer, device ID 4
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> When i try to do:
> * ifconfig bge0 inet (whatever)...
> the system just freezes - no panic, no errors - nothing. the only way
> to make it come back is hit the reset button
>
> When i do:
> * reboot
> * shutdown -p now
> it comes up to:
> * twed0: detached
> and then bails out again (no restart/shutdown follows)
>
> Tried several ACPI settings in the SuperMicro motherboard BIOS (ACPI
> 1.0, 2.0, 3.0, MPTable 1.1, 1.4), but nothing helps.
>
> When i repeatedly do 'ifconfig' to see the status of the ifs, the media
> status of bge0 changes from time to time (very frequently):
> # ifconfig bge0
> bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
> ether 00:30:48:57:c3:80
> media: Ethernet autoselect
> status: no carrier
>
> # ifconfig bge0
> bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
> ether 00:30:48:57:c3:80
> media: Ethernet autoselect (none <hw-loopback>)
> status: no carrier
> # ifconfig bge0
> bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
> ether 00:30:48:57:c3:80
> media: Ethernet autoselect (autoselect <hw-loopback>)
> status: no carrier
> # ifconfig bge0
> bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
> ether 00:30:48:57:c3:80
> media: Ethernet autoselect (10baseT/UTP <half-duplex,hw-
> loopback>)
> status: active
>
> Here's the complete dmesg, i've pointed some strange lines with ">>":
>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> ioapic2 <Version 1.1> irqs 32-47 on motherboard
> kbd1 at kbdmux0
> acpi0: <A M I OEMXSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: Sleep Button (fixed)
> >How-To-Repeat:
> Setup the latest RELENG_7 on a SuperMicro H8SSL-i2 motherboard
> (ServerWorks HT1000-based, maybe other mobos with this chipset show the
> same behaviour), then try to ifconfig bge0, or try to reboot or
> shutdown the system.
> >Fix:
>
>
> >Release-Note:
> >Audit-Trail:
> >Unformatted:
> >> acpi0: reservation of 540, 20 (4) failed
> >> acpi0: reservation of 500, 20 (4) failed
> >> acpi0: reservation of 560, 20 (4) failed
> >> acpi0: reservation of 0, a0000 (3) failed
> >> acpi0: reservation of 100000, 3ff00000 (3) failed
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> twe0: <3ware Storage Controller. Driver version 1.50.01.002> port
> 0xbc00-0xbc0f mem 0xfeaffc00-0xfeaffc0f,0xfe000000-0xfe7fffff irq 20 at
> device 1.0 on pci2
> twe0: [GIANT-LOCKED]
> twe0: [ITHREAD]
> twe0: AEN: <twe0: incomplete unit for unknown unit 1>
> twe0: AEN: <twe0: degraded unit for unknown unit 1>
> twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
> >> pci0:2:3:0: bad VPD cksum, remain 14
> bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
> 0x2100> mem 0xfead0000-0xfeadffff irq 24 at device 3.0 on pci2
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge0: Ethernet address: 00:30:48:57:c3:80
> bge0: [ITHREAD]
> >> pci0:2:3:1: bad VPD cksum, remain 14
> bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
> 0x2100> mem 0xfeac0000-0xfeacffff irq 25 at device 3.1 on pci2
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge1: Ethernet address: 00:30:48:57:c3:81
> bge1: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 2.2 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, USB> at device 3.0 (no driver attached)
> pci0: <serial bus, USB> at device 3.1 (no driver attached)
> pci0: <serial bus, USB> at device 3.2 (no driver attached)
> vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xf0000000-
> 0xf7ffffff,0xfebf0000-0xfebfffff at device 5.0 on pci0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model IntelliMouse Explorer, device ID 4
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> on acpi0
> sio0: type 16550A
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> sio1: [FILTER]
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff on
> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> Timecounters tick every 1.000 msec
> twed0: <Unit 1, TwinStor, Degraded> on twe0
> twed0: 78166MB (160084480 sectors)
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/twed0s1a
> bge1: link state changed to DOWN
> bge1: link state changed to UP
>
> Some notes:
> * the RAID status of the 3ware unit IS degraded, so the messages about
> it are okay.
> * the bge1 interface does work ok.
> * usb was disabled in the kernel (thus the "no driver attached"
> messages - they are okay too)
>
This is the same as kern/116328
More information about the freebsd-amd64
mailing list