amd64/88730: kernel panics during booting from the
installation CD
Eamon A.Roque
Eamon.Roque at arf.fak12.uni-muenchen.de
Wed Mar 21 14:00:16 UTC 2007
The following reply was made to PR amd64/88730; it has been noted by GNATS.
From: "Eamon A.Roque" <Eamon.Roque at arf.fak12.uni-muenchen.de>
To: bug-followup at FreeBSD.org,
gregory at home.ru
Cc:
Subject: Re: amd64/88730: kernel panics during booting from the
installation CD
Date: Wed, 21 Mar 2007 14:42:48 +0100
--=-3zNQDsVbqxOXeaynKK49
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Hi,
I'm getting a boot panic on an AMD machine on all versions of FreeBSD
from 6.1-RELEASE to 7.0-Current-200703.
The machine is a dc5750 SFF from HP/Compaq, Windsor-PV Mini Build PCB X6
Board with Athlon64-X2 3800+ 2Ghz FSB, ATI Chipset (see attachment
(output from "lspci -vxxx" and "hwinfo -all"under Linux)), 2GB Ram
(2048MB DDR2/667Mhz/Dual Channel). Graphic: NVidia GeForce 7300 LE
Booting (w) or (w)out ACPI, in Safe Mode, whatever:
Text from Bootloader on:
OK boot -v
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
panic: No BIOS smap info from loader
cpuid: 0
KDB: enter: panic
[thread pid 0 tid 0]
Stopped at kdb_enter+0x2f: nop
db> print
ffffffff8047317f
db>bt
Tracing pid 0 tid 0 td 0xffffffff8096ff40
kdb_enter() at kdb_enter+02f
panic() at panic+0x2f
hammer_time() at hammer_time+0xd2d
btext() at btext+0x24
db>smap
db>
HTH, just a "follow-up"
Eamon Roque
--=-3zNQDsVbqxOXeaynKK49
Content-Disposition: attachment; filename=hwinfo-all-linux-2.6.21-rc4-mm1.txt
Content-Type: text/plain; name=hwinfo-all-linux-2.6.21-rc4-mm1.txt; charset=utf-8
Content-Transfer-Encoding: 7bit
============ start debug info ============
libhd version 13.4u (x86-64)
using /var/lib/hardware
kernel version is 2.6
----- /proc/cmdline -----
root=/dev/sda6 ro locale=de_DE
----- /proc/cmdline end -----
debug = 0xff7ffff7
probe = 0x00000000000000000000 (-memory -pci -isapnp -net -floppy -misc -misc.serial -misc.par -misc.floppy -serial -cpu -bios -monitor -mouse -scsi -usb -usb.mods -adb -modem -modem.usb -parallel -parallel.lp -parallel.zip -isa -isa.isdn -isdn -kbd -prom -sbus -int -braille -braille.alva -braille.fhp -braille.ht -ignx11 -sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod -braille.baum -manual -fb -pppoe -scan -pcmcia -fork -parallel.imm -s390 -cpuemu -sysfs -s390disks -udev -block -block.cdrom -block.part -edd -edd.mod -bios.ddc -bios.fb -bios.mode -input -block.mods -bios.vesa -cpuemu.debug -scsi.noserial -wlan -bios.crc -hal -bios.vram -max -lxrc)
shm: attached segment 622604 at 0x2b44e911d000
>> hal.1: read hal data
hal: connected to: :1.9
----- hal device list -----
0: udi = '/org/freedesktop/Hal/devices/platform_bluetooth'
info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (bluetooth)'
platform.id = 'bluetooth'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/bluetooth'
linux.sysfs_path = '/sys/devices/platform/bluetooth'
1: udi = '/org/freedesktop/Hal/devices/volume_uuid_0dc65b33_31e1_4716_aae1_8816ac474c1d'
volume.unmount.valid_options = { 'lazy' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'data=' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
volume.ignore = true
volume.policy.desired_mount_point = 'scsidisk'
volume.policy.mount_filesystem = 'ext3'
volume.policy.should_mount = true
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_0dc65b33_31e1_4716_aae1_8816ac474c1d'
volume.partition.msdos_part_table_type = 131 (0x83)
info.product = 'Volume (ext3)'
volume.size = 148022784ull (0x8d2a600ull)
volume.num_blocks = 289107 (0x46953)
volume.block_size = 512 (0x200)
volume.partition.number = 1 (0x1)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted_read_only = false
volume.is_mounted = true
volume.mount_point = '/boot'
volume.label = ''
volume.uuid = '0dc65b33-31e1-4716-aae1-8816ac474c1d'
volume.fsversion = '1.0'
volume.fsusage = 'filesystem'
volume.fstype = 'ext3'
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
block.is_volume = true
block.minor = 1 (0x1)
block.major = 8 (0x8)
block.device = '/dev/sda1'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
linux.sysfs_path_device = '/sys/block/sda/sda1'
linux.sysfs_path = '/sys/block/sda/sda1'
2: udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
volume.partition.msdos_part_table_type = 5 (0x5)
info.product = 'Volume'
volume.size = 1024ull (0x400ull)
volume.num_blocks = 2 (0x2)
volume.block_size = 512 (0x200)
volume.partition.number = 2 (0x2)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted_read_only = false
volume.is_mounted = false
volume.mount_point = ''
volume.label = ''
volume.uuid = ''
volume.fsversion = ''
volume.fsusage = ''
volume.fstype = ''
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
block.is_volume = true
block.minor = 2 (0x2)
block.major = 8 (0x8)
block.device = '/dev/sda2'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
linux.sysfs_path_device = '/sys/block/sda/sda2'
linux.sysfs_path = '/sys/block/sda/sda2'
3: udi = '/org/freedesktop/Hal/devices/volume_uuid_5480fdd6_2527_4f3f_8590_4853b32bdb9c'
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_5480fdd6_2527_4f3f_8590_4853b32bdb9c'
volume.partition.msdos_part_table_type = 130 (0x82)
info.product = 'Volume (swap)'
volume.size = 501709824ull (0x1de77c00ull)
volume.num_blocks = 979902 (0xef3be)
volume.block_size = 512 (0x200)
volume.partition.number = 5 (0x5)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted_read_only = false
volume.is_mounted = false
volume.mount_point = ''
volume.label = ''
volume.uuid = '5480fdd6-2527-4f3f-8590-4853b32bdb9c'
volume.fsversion = '2'
volume.fsusage = 'other'
volume.fstype = 'swap'
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
block.is_volume = true
block.minor = 5 (0x5)
block.major = 8 (0x8)
block.device = '/dev/sda5'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
linux.sysfs_path_device = '/sys/block/sda/sda5'
linux.sysfs_path = '/sys/block/sda/sda5'
4: udi = '/org/freedesktop/Hal/devices/volume_uuid_a426118e_e7ff_4681_85a2_c263cf63917e'
volume.unmount.valid_options = { 'lazy' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'data=' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
volume.ignore = true
volume.policy.desired_mount_point = 'scsidisk'
volume.policy.mount_filesystem = 'ext3'
volume.policy.should_mount = true
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a426118e_e7ff_4681_85a2_c263cf63917e'
volume.partition.msdos_part_table_type = 131 (0x83)
info.product = 'Volume (ext3)'
volume.size = 39999504384ull (0x950280000ull)
volume.num_blocks = 78124032 (0x4a81400)
volume.block_size = 512 (0x200)
volume.partition.number = 6 (0x6)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted_read_only = false
volume.is_mounted = true
volume.mount_point = '/'
volume.label = ''
volume.uuid = 'a426118e-e7ff-4681-85a2-c263cf63917e'
volume.fsversion = '1.0'
volume.fsusage = 'filesystem'
volume.fstype = 'ext3'
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
block.is_volume = true
block.minor = 6 (0x6)
block.major = 8 (0x8)
block.device = '/dev/sda6'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
linux.sysfs_path_device = '/sys/block/sda/sda6'
linux.sysfs_path = '/sys/block/sda/sda6'
5: udi = '/org/freedesktop/Hal/devices/volume_uuid_d6a0368a_bd58_4df8_8588_e3b13ab47a0f'
volume.unmount.valid_options = { 'lazy' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'data=' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
volume.ignore = true
volume.policy.desired_mount_point = 'scsidisk'
volume.policy.mount_filesystem = 'ext3'
volume.policy.should_mount = true
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d6a0368a_bd58_4df8_8588_e3b13ab47a0f'
volume.partition.msdos_part_table_type = 131 (0x83)
info.product = '/home'
volume.size = 119389906944ull (0x1bcc316800ull)
volume.num_blocks = 233183412 (0xde618b4)
volume.block_size = 512 (0x200)
volume.partition.number = 7 (0x7)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted_read_only = false
volume.is_mounted = true
volume.mount_point = '/home'
volume.label = '/home'
volume.uuid = 'd6a0368a-bd58-4df8-8588-e3b13ab47a0f'
volume.fsversion = '1.0'
volume.fsusage = 'filesystem'
volume.fstype = 'ext3'
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
block.is_volume = true
block.minor = 7 (0x7)
block.major = 8 (0x8)
block.device = '/dev/sda7'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
linux.sysfs_path_device = '/sys/block/sda/sda7'
linux.sysfs_path = '/sys/block/sda/sda7'
6: udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
storage.policy.should_mount = false
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
storage.requires_eject = false
storage.hotpluggable = false
info.capabilities = { 'storage', 'block' }
info.category = 'storage'
info.product = 'SAMSUNG HD160JJ/'
info.vendor = 'ATA'
storage.removable = false
storage.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2_scsi_device_lun0'
storage.lun = 0 (0x0)
storage.firmware_version = 'ZM10'
storage.serial = '1ATA_SAMSUNG_HD160JJP_S0XSJ1HP200682'
storage.vendor = 'ATA'
storage.model = 'SAMSUNG HD160JJ/'
storage.drive_type = 'disk'
storage.automount_enabled_hint = true
storage.media_check_enabled = false
storage.no_partitions_hint = false
storage.bus = 'scsi'
block.is_volume = false
block.minor = 0 (0x0)
block.major = 8 (0x8)
block.device = '/dev/sda'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2_scsi_device_lun0'
linux.sysfs_path_device = '/sys/block/sda'
linux.sysfs_path = '/sys/block/sda'
7: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
linux.device_file = '/dev/snd/timer'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
alsa.device_file = '/dev/snd/timer'
info.product = 'ALSA Timer Device'
alsa.type = 'timer'
info.capabilities = { 'alsa' }
info.category = 'alsa'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.sysfs_path = '/sys/devices/virtual/sound/timer'
8: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
input.product = 'PC Speaker'
info.product = 'PC Speaker'
linux.device_file = '/dev/input/event0'
linux.subsystem = 'input'
linux.hotplug_type = 2 (0x2)
input.device = '/dev/input/event0'
info.capabilities = { 'input' }
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
input.physical_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
linux.sysfs_path = '/sys/class/input/input0/event0'
9: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (pcspkr)'
platform.id = 'pcspkr'
info.linux.driver = 'pcspkr'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/pcspkr'
linux.sysfs_path = '/sys/devices/platform/pcspkr'
10: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (serial8250)'
platform.id = 'serial8250'
info.linux.driver = 'serial8250'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/serial8250'
linux.sysfs_path = '/sys/devices/platform/serial8250'
11: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
linux.subsystem = 'serio'
linux.hotplug_type = 1 (0x1)
info.product = 'i8042 KBD port'
serio.description = 'i8042 KBD port'
serio.id = 'serio0'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'serio'
linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
12: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
linux.subsystem = 'serio'
linux.hotplug_type = 1 (0x1)
info.product = 'i8042 AUX port'
serio.description = 'i8042 AUX port'
serio.id = 'serio1'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'serio'
linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
13: udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (i8042)'
platform.id = 'i8042'
info.linux.driver = 'i8042'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/i8042'
linux.sysfs_path = '/sys/devices/platform/i8042'
14: udi = '/org/freedesktop/Hal/devices/pci_1002_5950'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_5950'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'RS480 Host Bridge'
pci.product = 'RS480 Host Bridge'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 22864 (0x5950)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
15: udi = '/org/freedesktop/Hal/devices/pci_10de_1d1'
info.udi = '/org/freedesktop/Hal/devices/pci_10de_1d1'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x51a4)'
pci.subsys_vendor = 'LeadTek Research Inc.'
info.product = 'Unknown (0x01d1)'
pci.product = 'Unknown (0x01d1)'
info.vendor = 'nVidia Corporation'
pci.vendor = 'nVidia Corporation'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 3 (0x3)
pci.subsys_vendor_id = 4221 (0x107d)
pci.subsys_product_id = 20900 (0x51a4)
pci.vendor_id = 4318 (0x10de)
pci.product_id = 465 (0x1d1)
info.linux.driver = 'nvidia'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_5a34'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0'
16: udi = '/org/freedesktop/Hal/devices/pci_1002_5a34'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_5a34'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = 'RS480 PCI-X Root Port'
pci.product = 'RS480 PCI-X Root Port'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 4 (0x4)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 23092 (0x5a34)
info.linux.driver = 'pcieport-driver'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
17: udi = '/org/freedesktop/Hal/devices/net_00_19_bb_5e_a8_aa'
info.udi = '/org/freedesktop/Hal/devices/net_00_19_bb_5e_a8_aa'
linux.subsystem = 'net'
linux.hotplug_type = 2 (0x2)
net.80203.mac_address = 110517725354ull (0x19bb5ea8aaull)
info.product = 'Networking Interface'
net.interface_up = true
net.arp_proto_hw_id = 1 (0x1)
net.linux.ifindex = 2 (0x2)
net.address = '00:19:bb:5e:a8:aa'
net.interface = 'eth0'
net.physical_device = '/org/freedesktop/Hal/devices/pci_14e4_167b'
info.capabilities = { 'net', 'net.80203' }
info.category = 'net.80203'
info.parent = '/org/freedesktop/Hal/devices/pci_14e4_167b'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:3f:00.0/net/eth0'
18: udi = '/org/freedesktop/Hal/devices/pci_14e4_167b'
info.udi = '/org/freedesktop/Hal/devices/pci_14e4_167b'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x167b)'
pci.product = 'Unknown (0x167b)'
info.vendor = 'Broadcom Corporation'
pci.vendor = 'Broadcom Corporation'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 2 (0x2)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 5348 (0x14e4)
pci.product_id = 5755 (0x167b)
info.linux.driver = 'tg3'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:3f:00.0'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_5a39'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.0/0000:3f:00.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:3f:00.0'
19: udi = '/org/freedesktop/Hal/devices/pci_1002_5a39'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_5a39'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = 'Unknown (0x5a39)'
pci.product = 'Unknown (0x5a39)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 4 (0x4)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 23097 (0x5a39)
info.linux.driver = 'pcieport-driver'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0'
20: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2_scsi_device_lun0_scsi_generic'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2_scsi_device_lun0_scsi_generic'
linux.device_file = '/dev/sg0'
linux.subsystem = 'scsi_generic'
linux.hotplug_type = 2 (0x2)
scsi_generic.device = '/dev/sg0'
info.product = 'SCSI Generic Interface'
info.capabilities = { 'scsi_generic' }
info.category = 'scsi_generic'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2_scsi_device_lun0'
linux.sysfs_path = '/sys/class/scsi_generic/sg0'
21: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2_scsi_device_lun0'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2_scsi_device_lun0'
linux.subsystem = 'scsi'
linux.hotplug_type = 1 (0x1)
scsi.type = 'disk'
scsi.vendor = 'ATA'
scsi.model = 'SAMSUNG HD160JJ/'
info.product = 'SCSI Device'
info.linux.driver = 'sd'
scsi.lun = 0 (0x0)
scsi.target = 0 (0x0)
scsi.bus = 0 (0x0)
scsi.host = 0 (0x0)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2'
info.bus = 'scsi'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0'
22: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2'
linux.subsystem = 'scsi_host'
linux.hotplug_type = 2 (0x2)
scsi_host.host = 0 (0x0)
info.product = 'SCSI Host Adapter'
info.capabilities = { 'scsi_host' }
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0/host0'
linux.sysfs_path = '/sys/class/scsi_host/host0'
23: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1_scsi_device_lun0_scsi_generic'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1_scsi_device_lun0_scsi_generic'
linux.device_file = '/dev/sg1'
linux.subsystem = 'scsi_generic'
linux.hotplug_type = 2 (0x2)
scsi_generic.device = '/dev/sg1'
info.product = 'SCSI Generic Interface'
info.capabilities = { 'scsi_generic' }
info.category = 'scsi_generic'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1_scsi_device_lun0'
linux.sysfs_path = '/sys/class/scsi_generic/sg1'
24: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1_scsi_device_lun0'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1_scsi_device_lun0'
linux.subsystem = 'scsi'
linux.hotplug_type = 1 (0x1)
scsi.type = 'cdrom'
scsi.vendor = 'HL-DT-ST'
scsi.model = 'DVD+-RW GSA-H31L'
info.product = 'SCSI Device'
info.linux.driver = 'sr'
scsi.lun = 0 (0x0)
scsi.target = 0 (0x0)
scsi.bus = 0 (0x0)
scsi.host = 1 (0x1)
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1'
info.bus = 'scsi'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0/host1/target1:0:0/1:0:0:0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host1/target1:0:0/1:0:0:0'
25: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1'
linux.subsystem = 'scsi_host'
linux.hotplug_type = 2 (0x2)
scsi_host.host = 1 (0x1)
info.product = 'SCSI Host Adapter'
info.capabilities = { 'scsi_host' }
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0/host1'
linux.sysfs_path = '/sys/class/scsi_host/host1'
26: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_0'
linux.subsystem = 'scsi_host'
linux.hotplug_type = 2 (0x2)
scsi_host.host = 2 (0x2)
info.product = 'SCSI Host Adapter'
info.capabilities = { 'scsi_host' }
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0/host2'
linux.sysfs_path = '/sys/class/scsi_host/host2'
27: udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host'
linux.subsystem = 'scsi_host'
linux.hotplug_type = 2 (0x2)
scsi_host.host = 3 (0x3)
info.product = 'SCSI Host Adapter'
info.capabilities = { 'scsi_host' }
info.category = 'scsi_host'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0/host3'
linux.sysfs_path = '/sys/class/scsi_host/host3'
28: udi = '/org/freedesktop/Hal/devices/pci_1002_4380'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x2813)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x4380)'
pci.product = 'Unknown (0x4380)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 1 (0x1)
pci.device_subclass = 6 (0x6)
pci.device_class = 1 (0x1)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10259 (0x2813)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17280 (0x4380)
info.linux.driver = 'ahci'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0'
29: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 2 (0x2)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:00:13.0'
usb.speed_bcd = 4608 (0x1200)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 1 (0x1)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0'
30: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_usbraw'
linux.device_file = '/dev/bus/usb/001/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/001/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/usb_device/usbdev1.1'
31: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 1 (0x1)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.serial = '0000:00:13.0'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'OHCI Host Controller'
usb_device.product = 'OHCI Host Controller'
info.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4387'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.0/usb1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1'
32: udi = '/org/freedesktop/Hal/devices/pci_1002_4387'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4387'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x4387)'
pci.product = 'Unknown (0x4387)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 16 (0x10)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17287 (0x4387)
info.linux.driver = 'ohci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0'
33: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 2 (0x2)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:00:13.1'
usb.speed_bcd = 4608 (0x1200)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 2 (0x2)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0'
34: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_usbraw'
linux.device_file = '/dev/bus/usb/002/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/002/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/usb_device/usbdev2.1'
35: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 2 (0x2)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.serial = '0000:00:13.1'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'OHCI Host Controller'
usb_device.product = 'OHCI Host Controller'
info.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4388'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.1/usb2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2'
36: udi = '/org/freedesktop/Hal/devices/pci_1002_4388'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4388'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x4388)'
pci.product = 'Unknown (0x4388)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 16 (0x10)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17288 (0x4388)
info.linux.driver = 'ohci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1'
37: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 2 (0x2)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:00:13.2'
usb.speed_bcd = 4608 (0x1200)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 3 (0x3)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0'
38: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0_logicaldev_input'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0_logicaldev_input'
input.product = 'Logitech USB Optical Mouse'
info.product = 'Logitech USB Optical Mouse'
linux.device_file = '/dev/input/event1'
linux.subsystem = 'input'
linux.hotplug_type = 2 (0x2)
input.device = '/dev/input/event1'
info.capabilities = { 'input', 'input.mouse' }
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0'
input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0'
linux.sysfs_path = '/sys/class/input/input1/event1'
39: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB HID Interface'
usb.interface.protocol = 2 (0x2)
usb.interface.subclass = 1 (0x1)
usb.interface.class = 3 (0x3)
usb.interface.number = 0 (0x0)
info.linux.driver = 'usbhid'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 0 (0x0)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 1133 (0x46d)
usb.product_id = 49164 (0xc00c)
usb.vendor = 'Logitech, Inc.'
usb.product = 'USB HID Interface'
usb.device_revision_bcd = 8464 (0x2110)
usb.max_power = 100 (0x64)
usb.num_ports = 0 (0x0)
usb.linux.device_number = 3 (0x3)
usb.speed_bcd = 336 (0x150)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = false
usb.can_wake_up = true
usb.bus_number = 3 (0x3)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0'
40: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_usbraw'
linux.device_file = '/dev/bus/usb/003/003'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/003/003'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1/usb_device/usbdev3.3'
41: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 3 (0x3)
usb_device.can_wake_up = true
usb_device.is_self_powered = false
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 336 (0x150)
usb_device.linux.device_number = 3 (0x3)
usb_device.num_ports = 0 (0x0)
usb_device.max_power = 100 (0x64)
usb_device.device_revision_bcd = 8464 (0x2110)
info.product = 'Optical Wheel Mouse'
usb_device.product = 'Optical Wheel Mouse'
info.vendor = 'Logitech, Inc.'
usb_device.vendor = 'Logitech, Inc.'
usb_device.product_id = 49164 (0xc00c)
usb_device.vendor_id = 1133 (0x46d)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 0 (0x0)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1'
42: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_if0_logicaldev_input'
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_if0_logicaldev_input'
button.has_state = false
button.type = ''
info.addons = { 'hald-addon-keyboard' }
input.product = 'CHICONY HP Basic USB Keyboard'
info.product = 'CHICONY HP Basic USB Keyboard'
linux.device_file = '/dev/input/event2'
linux.subsystem = 'input'
linux.hotplug_type = 2 (0x2)
input.device = '/dev/input/event2'
info.capabilities = { 'input', 'input.keyboard', 'button' }
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_if0'
input.physical_device = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_if0'
linux.sysfs_path = '/sys/class/input/input2/event2'
43: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB HID Interface'
usb.interface.protocol = 1 (0x1)
usb.interface.subclass = 1 (0x1)
usb.interface.class = 3 (0x3)
usb.interface.number = 0 (0x0)
info.linux.driver = 'usbhid'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 0 (0x0)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 1008 (0x3f0)
usb.product_id = 36 (0x24)
usb.vendor = 'Hewlett-Packard'
usb.product = 'USB HID Interface'
usb.device_revision_bcd = 768 (0x300)
usb.max_power = 100 (0x64)
usb.num_ports = 0 (0x0)
usb.linux.device_number = 4 (0x4)
usb.speed_bcd = 336 (0x150)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = false
usb.can_wake_up = true
usb.bus_number = 3 (0x3)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2:1.0'
44: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial_usbraw'
linux.device_file = '/dev/bus/usb/003/004'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/003/004'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-2/usb_device/usbdev3.4'
45: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial'
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_24_noserial'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 3 (0x3)
usb_device.can_wake_up = true
usb_device.is_self_powered = false
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 336 (0x150)
usb_device.linux.device_number = 4 (0x4)
usb_device.num_ports = 0 (0x0)
usb_device.max_power = 100 (0x64)
usb_device.device_revision_bcd = 768 (0x300)
info.product = 'HP Basic USB Keyboard'
usb_device.product = 'HP Basic USB Keyboard'
info.vendor = 'Hewlett-Packard'
usb_device.vendor = 'Hewlett-Packard'
usb_device.product_id = 36 (0x24)
usb_device.vendor_id = 1008 (0x3f0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 0 (0x0)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-2'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-2'
46: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_usbraw'
linux.device_file = '/dev/bus/usb/003/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/003/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/usb_device/usbdev3.1'
47: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 3 (0x3)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.serial = '0000:00:13.2'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'OHCI Host Controller'
usb_device.product = 'OHCI Host Controller'
info.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4389'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.2/usb3'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3'
48: udi = '/org/freedesktop/Hal/devices/pci_1002_4389'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4389'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x4389)'
pci.product = 'Unknown (0x4389)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 16 (0x10)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17289 (0x4389)
info.linux.driver = 'ohci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2'
49: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 2 (0x2)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:00:13.3'
usb.speed_bcd = 4608 (0x1200)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 4 (0x4)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0'
50: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3_usbraw'
linux.device_file = '/dev/bus/usb/004/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/004/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4/usb_device/usbdev4.1'
51: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_3'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 4 (0x4)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.serial = '0000:00:13.3'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'OHCI Host Controller'
usb_device.product = 'OHCI Host Controller'
info.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438a'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.3/usb4'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4'
52: udi = '/org/freedesktop/Hal/devices/pci_1002_438a'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438a'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x438a)'
pci.product = 'Unknown (0x438a)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 16 (0x10)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17290 (0x438a)
info.linux.driver = 'ohci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.3'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3'
53: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 2 (0x2)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:00:13.4'
usb.speed_bcd = 4608 (0x1200)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 5 (0x5)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0'
54: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4_usbraw'
linux.device_file = '/dev/bus/usb/005/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/005/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5/usb_device/usbdev5.1'
55: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_4'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 5 (0x5)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.serial = '0000:00:13.4'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'OHCI Host Controller'
usb_device.product = 'OHCI Host Controller'
info.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.vendor = 'Linux 2.6.21-rc4-mm1 ohci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_438b'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.4/usb5'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5'
56: udi = '/org/freedesktop/Hal/devices/pci_1002_438b'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438b'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x438b)'
pci.product = 'Unknown (0x438b)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 16 (0x10)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17291 (0x438b)
info.linux.driver = 'ohci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.4'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4'
57: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 1 (0x1)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.21-rc4-mm1 ehci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 10 (0xa)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:00:13.5'
usb.speed_bcd = 294912 (0x48000)
usb.version_bcd = 512 (0x200)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 6 (0x6)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0'
58: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5_usbraw'
linux.device_file = '/dev/bus/usb/006/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/006/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/usb_device/usbdev6.1'
59: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_5'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 6 (0x6)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 512 (0x200)
usb_device.speed_bcd = 294912 (0x48000)
usb_device.serial = '0000:00:13.5'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 10 (0xa)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'EHCI Host Controller'
usb_device.product = 'EHCI Host Controller'
info.vendor = 'Linux 2.6.21-rc4-mm1 ehci_hcd'
usb_device.vendor = 'Linux 2.6.21-rc4-mm1 ehci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 1 (0x1)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4386'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.5/usb6'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6'
60: udi = '/org/freedesktop/Hal/devices/pci_1002_4386'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4386'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x4386)'
pci.product = 'Unknown (0x4386)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 32 (0x20)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17286 (0x4386)
info.linux.driver = 'ehci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:13.5'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5'
61: udi = '/org/freedesktop/Hal/devices/pci_1002_4385'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4385'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x4385)'
pci.product = 'Unknown (0x4385)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 5 (0x5)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17285 (0x4385)
info.linux.driver = 'piix4_smbus'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:14.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0'
62: udi = '/org/freedesktop/Hal/devices/pci_1002_438c'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x438c)'
pci.product = 'Unknown (0x438c)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 143 (0x8f)
pci.device_subclass = 1 (0x1)
pci.device_class = 1 (0x1)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17292 (0x438c)
info.linux.driver = 'ATIIXP_IDE'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:14.1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1'
63: udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_capture_2'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_capture_2'
linux.device_file = '/dev/snd/pcmC0D2c'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALC260 Analog ALSA Capture Device'
alsa.type = 'capture'
alsa.device_id = 'ALC260 Analog'
alsa.card_id = 'SB'
alsa.device = 2 (0x2)
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'
alsa.device_file = '/dev/snd/pcmC0D2c'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D2c'
64: udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_playback_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_playback_0'
linux.device_file = '/dev/snd/pcmC0D0p'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALC260 Analog ALSA Playback Device'
alsa.type = 'playback'
alsa.device_id = 'ALC260 Analog'
alsa.card_id = 'SB'
alsa.device = 0 (0x0)
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'
alsa.device_file = '/dev/snd/pcmC0D0p'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0p'
65: udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_capture_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_capture_0'
linux.device_file = '/dev/snd/pcmC0D0c'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALC260 Analog ALSA Capture Device'
alsa.type = 'capture'
alsa.device_id = 'ALC260 Analog'
alsa.card_id = 'SB'
alsa.device = 0 (0x0)
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'
alsa.device_file = '/dev/snd/pcmC0D0c'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0c'
66: udi = '/org/freedesktop/Hal/devices/pci_1002_4383_oss_pcm_0_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_oss_pcm_0_0'
linux.device_file = '/dev/dsp'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALC260 Analog OSS PCM Device'
oss.type = 'pcm'
oss.device = 0 (0x0)
oss.device_id = 'ALC260 Analog'
oss.card_id = 'SB'
oss.card = 0 (0x0)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'
oss.device_file = '/dev/dsp'
info.capabilities = { 'oss' }
info.category = 'oss'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/dsp'
67: udi = '/org/freedesktop/Hal/devices/pci_1002_4383_oss_pcm_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_oss_pcm_0'
linux.device_file = '/dev/audio'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALC260 Analog OSS PCM Device'
oss.type = 'pcm'
oss.device = 0 (0x0)
oss.device_id = 'ALC260 Analog'
oss.card_id = 'SB'
oss.card = 0 (0x0)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'
oss.device_file = '/dev/audio'
info.capabilities = { 'oss' }
info.category = 'oss'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/audio'
68: udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_control__1'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_alsa_control__1'
linux.device_file = '/dev/snd/controlC0'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'SB ALSA Control Device'
alsa.card_id = 'SB'
alsa.type = 'control'
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'
alsa.device_file = '/dev/snd/controlC0'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/controlC0'
69: udi = '/org/freedesktop/Hal/devices/pci_1002_4383_oss_mixer__1'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_oss_mixer__1'
linux.device_file = '/dev/mixer'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALC260 Analog OSS Control Device'
oss.type = 'mixer'
oss.device_id = 'ALC260 Analog'
oss.card_id = 'SB'
oss.card = 0 (0x0)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'
oss.device_file = '/dev/mixer'
info.capabilities = { 'oss' }
info.category = 'oss'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/mixer'
70: udi = '/org/freedesktop/Hal/devices/pci_1002_4383'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x4383)'
pci.product = 'Unknown (0x4383)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 3 (0x3)
pci.device_class = 4 (0x4)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17283 (0x4383)
info.linux.driver = 'HDA Intel'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:14.2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2'
71: udi = '/org/freedesktop/Hal/devices/pci_1002_438d'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_438d'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x280a)'
pci.subsys_vendor = 'Hewlett-Packard Company'
info.product = 'Unknown (0x438d)'
pci.product = 'Unknown (0x438d)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 1 (0x1)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 4156 (0x103c)
pci.subsys_product_id = 10250 (0x280a)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17293 (0x438d)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:14.3'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3'
72: udi = '/org/freedesktop/Hal/devices/pci_1002_4384'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4384'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = 'Unknown (0x4384)'
pci.product = 'Unknown (0x4384)'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 1 (0x1)
pci.device_subclass = 4 (0x4)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 17284 (0x4384)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:14.4'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4'
73: udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
info.vendor = 'Advanced Micro Devices [AMD]'
pci.vendor = 'Advanced Micro Devices [AMD]'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 4130 (0x1022)
pci.product_id = 4352 (0x1100)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'
74: udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = 'K8 [Athlon64/Opteron] Address Map'
pci.product = 'K8 [Athlon64/Opteron] Address Map'
info.vendor = 'Advanced Micro Devices [AMD]'
pci.vendor = 'Advanced Micro Devices [AMD]'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 4130 (0x1022)
pci.product_id = 4353 (0x1101)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'
75: udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = 'K8 [Athlon64/Opteron] DRAM Controller'
pci.product = 'K8 [Athlon64/Opteron] DRAM Controller'
info.vendor = 'Advanced Micro Devices [AMD]'
pci.vendor = 'Advanced Micro Devices [AMD]'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 4130 (0x1022)
pci.product_id = 4354 (0x1102)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'
76: udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'
pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'
info.vendor = 'Advanced Micro Devices [AMD]'
pci.vendor = 'Advanced Micro Devices [AMD]'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 4130 (0x1022)
pci.product_id = 4355 (0x1103)
info.linux.driver = 'k8temp'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.3'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'
77: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'PnP Device (PNP0a08)'
pnp.id = 'PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
linux.sysfs_path = '/sys/devices/pnp0/00:00'
78: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'Math Coprocessor'
pnp.description = 'Math Coprocessor'
pnp.id = 'PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
linux.sysfs_path = '/sys/devices/pnp0/00:01'
79: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'AT DMA Controller'
pnp.description = 'AT DMA Controller'
pnp.id = 'PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
linux.sysfs_path = '/sys/devices/pnp0/00:02'
80: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'AT Real-Time Clock'
pnp.description = 'AT Real-Time Clock'
pnp.id = 'PNP0b00'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
linux.sysfs_path = '/sys/devices/pnp0/00:03'
81: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'AT-style speaker sound'
pnp.description = 'AT-style speaker sound'
pnp.id = 'PNP0800'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
linux.sysfs_path = '/sys/devices/pnp0/00:04'
82: udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'PS/2 Port for PS/2-style Mice'
pnp.description = 'PS/2 Port for PS/2-style Mice'
pnp.id = 'PNP0f13'
info.linux.driver = 'i8042 aux'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
linux.sysfs_path = '/sys/devices/pnp0/00:05'
83: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
pnp.id = 'PNP0303'
info.linux.driver = 'i8042 kbd'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
linux.sysfs_path = '/sys/devices/pnp0/00:06'
84: udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'ECP printer port'
pnp.description = 'ECP printer port'
pnp.id = 'PNP0401'
info.linux.driver = 'parport_pc'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
linux.sysfs_path = '/sys/devices/pnp0/00:07'
85: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
linux.device_file = '/dev/ttyS0'
linux.subsystem = 'tty'
linux.hotplug_type = 2 (0x2)
info.product = '16550A-compatible COM port'
serial.type = 'platform'
serial.port = 0 (0x0)
serial.device = '/dev/ttyS0'
serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.capabilities = { 'serial' }
info.category = 'serial'
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
linux.sysfs_path = '/sys/devices/pnp0/00:08/tty/ttyS0'
86: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = '16550A-compatible COM port'
pnp.description = '16550A-compatible COM port'
pnp.id = 'PNP0501'
info.linux.driver = 'serial'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
linux.sysfs_path = '/sys/devices/pnp0/00:08'
87: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'PC standard floppy disk controller'
pnp.description = 'PC standard floppy disk controller'
pnp.id = 'PNP0700'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
linux.sysfs_path = '/sys/devices/pnp0/00:09'
88: udi = '/org/freedesktop/Hal/devices/pnp_PNP0003'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0003'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'APIC'
pnp.description = 'APIC'
pnp.id = 'PNP0003'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'
linux.sysfs_path = '/sys/devices/pnp0/00:0a'
89: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
pnp.id = 'PNP0c02'
info.linux.driver = 'system'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'
linux.sysfs_path = '/sys/devices/pnp0/00:0b'
90: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
pnp.id = 'PNP0c02'
info.linux.driver = 'system'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:0c'
linux.sysfs_path = '/sys/devices/pnp0/00:0c'
91: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
linux.subsystem = 'pnp'
linux.hotplug_type = 1 (0x1)
info.product = 'System Board'
pnp.description = 'System Board'
pnp.id = 'PNP0c01'
info.linux.driver = 'system'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pnp'
linux.sysfs_path_device = '/sys/devices/pnp0/00:0d'
linux.sysfs_path = '/sys/devices/pnp0/00:0d'
92: udi = '/org/freedesktop/Hal/devices/computer'
info.callouts.add = { 'hal-system-storage-cleanup-mountpoints' }
storage.policy.default.mount_option.exec = true
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' }
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', '', '', 'b' }
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave' }
info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
system.formfactor = 'unknown'
power_management.can_suspend_to_disk = true
power_management.can_suspend_to_ram = true
system.kernel.machine = 'x86_64'
system.kernel.version = '2.6.21-rc4-mm1'
system.kernel.name = 'Linux'
info.udi = '/org/freedesktop/Hal/devices/computer'
info.product = 'Computer'
linux.sysfs_path_device = '(none)'
info.bus = 'unknown'
----- hal device list end -----
>> hal.2: assign udi
used irqs:
=========== end debug info ============
--=-3zNQDsVbqxOXeaynKK49
Content-Disposition: attachment; filename=lscpi-vxxx-amd-linux-2.6.21-rc4-mm1.txt
Content-Type: text/plain; name=lscpi-vxxx-amd-linux-2.6.21-rc4-mm1.txt; charset=utf-8
Content-Transfer-Encoding: 7bit
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32
00: 02 10 50 59 06 01 20 22 10 00 00 06 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d1000000-d31fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d0100000
Capabilities: <access denied>
00: 02 10 34 5a 07 05 10 00 00 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00
20: 00 d1 10 d3 01 c0 11 d0 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 0a 00
00:07.0 PCI bridge: ATI Technologies Inc Unknown device 5a39 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
Memory behind bridge: d0200000-d04fffff
Capabilities: <access denied>
00: 02 10 39 5a 07 05 10 00 00 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 3f 3f 00 f1 01 00 00
20: 20 d0 40 d0 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 02 00
00:12.0 SATA controller: ATI Technologies Inc Unknown device 4380 (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Unknown device 2813
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 22
I/O ports at 1130 [size=8]
I/O ports at 1150 [size=4]
I/O ports at 1138 [size=8]
I/O ports at 1154 [size=4]
I/O ports at 1100 [size=16]
Memory at d0509000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00: 02 10 80 43 07 01 30 02 00 01 06 01 10 20 00 00
10: 31 11 00 00 51 11 00 00 39 11 00 00 55 11 00 00
20: 01 11 00 00 00 90 50 d0 00 00 00 00 3c 10 13 28
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
00:13.0 USB Controller: ATI Technologies Inc Unknown device 4387 (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at d0504000 (32-bit, non-prefetchable) [size=4K]
00: 02 10 87 43 07 01 a0 02 00 10 03 0c 10 20 80 00
10: 00 40 50 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
00:13.1 USB Controller: ATI Technologies Inc Unknown device 4388 (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at d0505000 (32-bit, non-prefetchable) [size=4K]
00: 02 10 88 43 07 01 a0 02 00 10 03 0c 10 20 00 00
10: 00 50 50 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
00:13.2 USB Controller: ATI Technologies Inc Unknown device 4389 (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at d0506000 (32-bit, non-prefetchable) [size=4K]
00: 02 10 89 43 07 01 a0 02 00 10 03 0c 10 20 00 00
10: 00 60 50 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:13.3 USB Controller: ATI Technologies Inc Unknown device 438a (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at d0507000 (32-bit, non-prefetchable) [size=4K]
00: 02 10 8a 43 07 01 a0 02 00 10 03 0c 10 20 00 00
10: 00 70 50 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
00:13.4 USB Controller: ATI Technologies Inc Unknown device 438b (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at d0508000 (32-bit, non-prefetchable) [size=4K]
00: 02 10 8b 43 07 01 a0 02 00 10 03 0c 10 20 00 00
10: 00 80 50 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:13.5 USB Controller: ATI Technologies Inc Unknown device 4386 (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
Memory at d0509800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00: 02 10 86 43 17 01 b0 02 00 20 03 0c 10 20 00 00
10: 00 98 50 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 04 00 00
00:14.0 SMBus: ATI Technologies Inc Unknown device 4385 (rev 13)
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: 66MHz, medium devsel
I/O ports at fc00 [size=16]
Memory at d0509400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00: 02 10 85 43 03 01 30 02 13 00 05 0c 00 00 80 00
10: 01 fc 00 00 00 94 50 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
00:14.1 IDE interface: ATI Technologies Inc Unknown device 438c (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
I/O ports at 1140 [size=8]
I/O ports at 1158 [size=4]
I/O ports at 1148 [size=8]
I/O ports at 115c [size=4]
I/O ports at 1120 [size=16]
Capabilities: <access denied>
00: 02 10 8c 43 05 01 30 02 00 8f 01 01 10 20 00 00
10: 41 11 00 00 59 11 00 00 49 11 00 00 5d 11 00 00
20: 21 11 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00
00:14.2 Audio device: ATI Technologies Inc Unknown device 4383
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at d0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00: 02 10 83 43 06 00 10 04 00 00 03 04 10 20 00 00
10: 04 00 50 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 00 00 00
00:14.3 ISA bridge: ATI Technologies Inc Unknown device 438d
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, 66MHz, medium devsel, latency 0
00: 02 10 8d 43 0f 01 20 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4384 (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
00: 02 10 84 43 27 01 a0 02 00 01 04 06 00 40 81 00
10: 00 00 00 00 00 00 00 00 00 07 07 40 f0 00 80 22
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: <access denied>
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: <access denied>
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 01d1 (rev a1) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc. Unknown device 51a4
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d2000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
00: de 10 d1 01 07 01 10 00 a1 00 00 03 00 00 00 00
10: 00 00 00 d1 0c 00 00 c0 00 00 00 00 04 00 00 d2
20: 00 00 00 00 00 00 00 00 00 00 00 00 7d 10 a4 51
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
3f:00.0 Ethernet controller: Broadcom Corporation Unknown device 167b (rev 02)
Subsystem: Hewlett-Packard Company Unknown device 280a
Flags: bus master, fast devsel, latency 0, IRQ 509
Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
00: e4 14 7b 16 06 05 10 00 02 00 00 02 10 00 00 00
10: 04 00 40 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 0a 28
30: 00 00 00 00 48 00 00 00 00 00 00 00 05 01 00 00
--=-3zNQDsVbqxOXeaynKK49--
More information about the freebsd-amd64
mailing list