Installation fails (6.1 and 7.0)
Nuno Henriques
nh at netcabo.pt
Sun Jan 21 19:19:28 UTC 2007
One last update on this:
I had to remove the SCSI controller to install FreeBSD. What a PITA.
Now, I'm running the current snapshot from Jan 07, loaded the module
if_nfe, and it's working fine. :)
Here's my dmesg output:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200701 #0: Sun Jan 7 11:04:00 UTC 2007
root at stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 2134028288 (2035 MB)
avail memory = 2059522048 (1964 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPIon motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHzport 0x1008-0x100b on acpi0
cpu0: <ACPI CPUon acpi0
cpu1: <ACPI CPUon acpi0
acpi_button0: <Power Buttonon acpi0
pcib0: <ACPI Host-PCI bridgeport 0xcf8-0xcff on acpi0
pci0: <ACPI PCI buson pcib0
pcib0: HT Bridge at 0:13:0 has non-default MSI window 0x2402000a
pcib0: HT Bridge at 0:13:1 has non-default MSI window 0x2402000a
pcib0: HT Bridge at 0:13:2 has non-default MSI window 0x3402000a
pcib0: HT Bridge at 0:14:1 has non-default MSI window 0x0
pcib0: HT Bridge at 0:16:0 has non-default MSI window 0x75011
pci0: <memory, RAMat device 0.0 (no driver attached)
pci0: <memory, RAMat device 0.1 (no driver attached)
pci0: <memory, RAMat device 0.2 (no driver attached)
pci0: <memory, RAMat device 0.3 (no driver attached)
pci0: <memory, RAMat device 0.4 (no driver attached)
pci0: <memory, RAMat device 0.5 (no driver attached)
pci0: <memory, RAMat device 0.6 (no driver attached)
pci0: <memory, RAMat device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridgeat device 3.0 on pci0
pci1: <ACPI PCI buson pcib1
pcib2: <ACPI PCI-PCI bridgeat device 4.0 on pci0
pci2: <ACPI PCI buson pcib2
pcib3: <PCI-PCI bridgeat device 0.0 on pci2
pci3: <PCI buson pcib3
arcmsr0: <Areca SATA Host Adapter RAID Controller
>mem 0xfdfff000-0xfdffffff,0xfd800000-0xfdbfffff irq 16 at device 14.0 on pci3
ARECA RAID ADAPTER0: Driver Version 1.20.00.13 2006-8-18
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13
pcib4: <PCI-PCI bridgeat device 0.2 on pci2
pci4: <PCI buson pcib4
pci0: <memory, RAMat device 8.0 (no driver attached)
isab0: <PCI-ISA bridgeat device 9.0 on pci0
isa0: <ISA buson isab0
pci0: <serial bus, SMBusat device 9.1 (no driver attached)
pci0: <memory, RAMat device 9.2 (no driver attached)
ohci0: <OHCI (generic) USB controllermem 0xfe02f000-0xfe02ffff irq 21 at
device 10.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controlleron ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1on usb0
uhub0: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controllerport
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 12.0 on pci0
ata0: <ATA channel 0on atapci0
ata1: <ATA channel 1on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controllerport
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem
0xfe02d000-0xfe02dfff irq 22 at device 13.0 on pci0
ata2: <ATA channel 0on atapci1
ata3: <ATA channel 1on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controllerport
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem
0xfe02c000-0xfe02cfff irq 23 at device 13.1 on pci0
ata4: <ATA channel 0on atapci2
ata5: <ATA channel 1on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controllerport
0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f
mem 0xfe02b000-0xfe02bfff irq 20 at device 13.2 on pci0
ata6: <ATA channel 0on atapci3
ata7: <ATA channel 1on atapci3
pcib5: <ACPI PCI-PCI bridgeat device 14.0 on pci0
pci5: <ACPI PCI buson pcib5
pci0: <multimediaat device 14.1 (no driver attached)
pci0: <bridgeat device 16.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridgeat device 18.0 on pci0
pci6: <ACPI PCI buson pcib6
pcib7: <ACPI PCI-PCI bridgeat device 20.0 on pci0
pci7: <ACPI PCI buson pcib7
pcib8: <ACPI PCI-PCI bridgeat device 22.0 on pci0
pci8: <ACPI PCI buson pcib8
pcib9: <ACPI PCI-PCI bridgeat device 23.0 on pci0
pci9: <ACPI PCI buson pcib9
vgapci0: <VGA-compatible displaymem
0xf4000000-0xf7ffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 16
at device 0.0 on pci9
acpi_tz0: <Thermal Zoneon acpi0
fdc0: <floppy drive controllerport 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" driveon fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboardirq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMat iomem 0xd0000-0xd0fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System consoleat flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGAat port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class
0/0, rev 1.10/3.00, addr 2on uhub0
ums0: 3 buttons and Z dir.ight (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200701 #0: Sun Jan 7 11:04:00 UTC 2007
root at stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 2134028288 (2035 MB)
avail memory = 2059522048 (1964 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPIon motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHzport 0x1008-0x100b on acpi0
cpu0: <ACPI CPUon acpi0
cpu1: <ACPI CPUon acpi0
acpi_button0: <Power Buttonon acpi0
pcib0: <ACPI Host-PCI bridgeport 0xcf8-0xcff on acpi0
pci0: <ACPI PCI buson pcib0
pcib0: HT Bridge at 0:13:0 has non-default MSI window 0x2402000a
pcib0: HT Bridge at 0:13:1 has non-default MSI window 0x2402000a
pcib0: HT Bridge at 0:13:2 has non-default MSI window 0x3402000a
pcib0: HT Bridge at 0:14:1 has non-default MSI window 0x0
pcib0: HT Bridge at 0:16:0 has non-default MSI window 0x75011
pci0: <memory, RAMat device 0.0 (no driver attached)
pci0: <memory, RAMat device 0.1 (no driver attached)
pci0: <memory, RAMat device 0.2 (no driver attached)
pci0: <memory, RAMat device 0.3 (no driver attached)
pci0: <memory, RAMat device 0.4 (no driver attached)
pci0: <memory, RAMat device 0.5 (no driver attached)
pci0: <memory, RAMat device 0.6 (no driver attached)
pci0: <memory, RAMat device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridgeat device 3.0 on pci0
pci1: <ACPI PCI buson pcib1
pcib2: <ACPI PCI-PCI bridgeat device 4.0 on pci0
pci2: <ACPI PCI buson pcib2
pcib3: <PCI-PCI bridgeat device 0.0 on pci2
pci3: <PCI buson pcib3
arcmsr0: <Areca SATA Host Adapter RAID Controller
>mem 0xfdfff000-0xfdffffff,0xfd800000-0xfdbfffff irq 16 at device 14.0 on pci3
ARECA RAID ADAPTER0: Driver Version 1.20.00.13 2006-8-18
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13
pcib4: <PCI-PCI bridgeat device 0.2 on pci2
pci4: <PCI buson pcib4
pci0: <memory, RAMat device 8.0 (no driver attached)
isab0: <PCI-ISA bridgeat device 9.0 on pci0
isa0: <ISA buson isab0
pci0: <serial bus, SMBusat device 9.1 (no driver attached)
pci0: <memory, RAMat device 9.2 (no driver attached)
ohci0: <OHCI (generic) USB controllermem 0xfe02f000-0xfe02ffff irq 21 at
device 10.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controlleron ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1on usb0
uhub0: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controllerport
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 12.0 on pci0
ata0: <ATA channel 0on atapci0
ata1: <ATA channel 1on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controllerport
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem
0xfe02d000-0xfe02dfff irq 22 at device 13.0 on pci0
ata2: <ATA channel 0on atapci1
ata3: <ATA channel 1on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controllerport
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem
0xfe02c000-0xfe02cfff irq 23 at device 13.1 on pci0
ata4: <ATA channel 0on atapci2
ata5: <ATA channel 1on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controllerport
0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f
mem 0xfe02b000-0xfe02bfff irq 20 at device 13.2 on pci0
ata6: <ATA channel 0on atapci3
ata7: <ATA channel 1on atapci3
pcib5: <ACPI PCI-PCI bridgeat device 14.0 on pci0
pci5: <ACPI PCI buson pcib5
pci0: <multimediaat device 14.1 (no driver attached)
pci0: <bridgeat device 16.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridgeat device 18.0 on pci0
pci6: <ACPI PCI buson pcib6
pcib7: <ACPI PCI-PCI bridgeat device 20.0 on pci0
pci7: <ACPI PCI buson pcib7
pcib8: <ACPI PCI-PCI bridgeat device 22.0 on pci0
pci8: <ACPI PCI buson pcib8
pcib9: <ACPI PCI-PCI bridgeat device 23.0 on pci0
pci9: <ACPI PCI buson pcib9
vgapci0: <VGA-compatible displaymem
0xf4000000-0xf7ffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 16
at device 0.0 on pci9
acpi_tz0: <Thermal Zoneon acpi0
fdc0: <floppy drive controllerport 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" driveon fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboardirq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMat iomem 0xd0000-0xd0fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System consoleat flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGAat port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class
0/0, rev 1.10/3.00, addr 2on uhub0
ums0: 3 buttons and Z dir.
ugen0: <Manufac RTL8187_Wireless, class 0/0, rev 1.10/1.00, addr 3on uhub0
Timecounters tick every 1.000 msec
acd0: DVDR <ASUS DRW-1608P2/1.11at ata0-master UDMA66
acd1: DVDROM <HL-DT-STDVD-ROM GDR8164B/0L06at ata0-slave UDMA33
Waiting 5 seconds for SCSI devices to settle
pass1 at arcmsr0 bus 0 target 16 lun 0
pass1: <Areca RAID controller R001Fixed Processor SCSI-0 device
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da0: 66757MB (136718336 512 byte sectors: 255H 63S/T 8510C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
nfe0: <NVIDIA nForce MCP55 Networking Adapterport 0xb000-0xb007 mem
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22
at device 16.0 on pci0
miibus0: <MII buson nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHYon miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
nfe0: using obsoleted if_watchdog interface
nfe0: Ethernet address: 00:17:31:a2:6c:4a
nfe0: link state changed to DOWN
nfe0: link state changed to UP
pid 20269 (conftest), uid 0: exited on signal 11 (core dumped)
ugen0: <Manufac RTL8187_Wireless, class 0/0, rev 1.10/1.00, addr 3on uhub0
Timecounters tick every 1.000 msec
acd0: DVDR <ASUS DRW-1608P2/1.11at ata0-master UDMA66
acd1: DVDROM <HL-DT-STDVD-ROM GDR8164B/0L06at ata0-slave UDMA33
Waiting 5 seconds for SCSI devices to settle
pass1 at arcmsr0 bus 0 target 16 lun 0
pass1: <Areca RAID controller R001Fixed Processor SCSI-0 device
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da0: 66757MB (136718336 512 byte sectors: 255H 63S/T 8510C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
nfe0: <NVIDIA nForce MCP55 Networking Adapterport 0xb000-0xb007 mem
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22
at device 16.0 on pci0
miibus0: <MII buson nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHYon miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
nfe0: using obsoleted if_watchdog interface
nfe0: Ethernet address: 00:17:31:a2:6c:4a
nfe0: link state changed to DOWN
nfe0: link state changed to UP
pid 20269 (conftest), uid 0: exited on signal 11 (core dumped)
More information about the freebsd-amd64
mailing list