tyan am2 boards

[O. Hartmann]

Philipp Wuensche wrote:
> Ken Gunderson wrote:
>   
>> Greetings All:
>>
>> Perchance does anyone have any experience with either of these
>> Tyan AM2 boards they could share??
>>
>> Tomcat n3400B (S2925) - nVidia nForce Pro 3400 based
>> <http://www.tyan.com/products/html/tomcatn3400b_spec.html>
>>
>>
>> Tomcat h1000S (S3950) - Broadcom ht1000 based
>> <http://www.tyan.com/products/html/tomcath1000s.html>
>>     
>
> I have this board since yesterday. With SATA in P-ATA emulation it boots
> and I'm able to install 6.1-RELAESE on the both SATA disks (ad6, ad10)
> with gmirror.
>
> Whats not working is any kind of temperature or fan-speed monitoring, I
> just don't get the hw.acpi.thermal stuff and building the kernel with
> smb and intpm support does not give the /dev/smb device.
>   

The same on older nForce4X16 based boards like the A8N32-SLI from ASUS
and the same on ASUS P4P800 Board, an older i845 based P4 board. It
seems to me that every

ACPI APIC Table: <A M I  OEMAPIC >

marked mainboard I have access to does not show up any kind of fan speed/temperature stuff.

I know, that OpenBSD on the same motherboards do!


> Also this amr_linux failure looks odd, but I get that on other Tyan
> boards too.
>
> I don't use the onboard raid-stuff, so I can't say anything about that.
>
> Don't wonder about the UDMA33 message of the harddisks, they both work
> in full speed. Got 50MByte/s sustained while syncing the gmirror.
>
> If you have any tests or questions, the system will not be in production
> until end of next week or so, so I can play if you have any specific
> questions :-)
>
> dmesg:
>
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-RELEASE-p10 #0: Thu Oct 19 15:16:05 CEST 2006
>     root at server1:/usr/obj/usr/src/sys/SMP-FOO
> ACPI APIC Table: <A M I  OEMAPIC >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz
> K8-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>   Features2=0x2001<SSE3,CX16>
>   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
>   AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
>   Cores per package: 2
> real memory  = 2147418112 (2047 MB)
> avail memory = 2062290944 (1966 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> ioapic2 <Version 1.1> irqs 32-47 on motherboard
> kbd0 at kbdmux0
> acpi0: <A M I OEMXSDT> on motherboard
> acpi0: Power Button (fixed)
> acpi0: Sleep Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> atapci0: <GENERIC ATA controller> port
> 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f
> mem 0xff3fe000-0xff3fffff irq 11 at device 14.0 on pci1
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> atapci1: <GENERIC ATA controller> port
> 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f
> irq 11 at device 14.1 on pci1
> ata4: <ATA channel 0> on atapci1
> ata5: <ATA channel 1> on atapci1
> atapci2: <GENERIC ATA controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0
> ata0: <ATA channel 0> on atapci2
> ata1: <ATA channel 1> on atapci2
> isab0: <PCI-ISA bridge> at device 2.2 on pci0
> isa0: <ISA bus> on isab0
> ohci0: <OHCI (generic) USB controller> port 0xe000-0xe0ff mem
> 0xff6b4000-0xff6b4fff irq 10 at device 3.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ohci1: <OHCI (generic) USB controller> port 0xe400-0xe4ff mem
> 0xff6b5000-0xff6b5fff irq 10 at device 3.1 on pci0
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> port 0xe800-0xe8ff mem
> 0xff6b6000-0xff6b6fff irq 10 at device 3.2 on pci0
> ehci0: [GIANT-LOCKED]
> usb2: EHCI version 1.0
> usb2: companion controllers, 2 ports each: usb0 usb1
> usb2: <EHCI (generic) USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
> 0xdc00-0xdc3f mem 0xff680000-0xff69ffff,0xff660000-0xff67ffff irq 24 at
> device 4.0 on pci0
> em0: Ethernet address: 00:e0:81:5e:bd:f4
> em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
> 0xd880-0xd8bf mem 0xff620000-0xff63ffff,0xff600000-0xff61ffff irq 25 at
> device 5.0 on pci0
> em1: Ethernet address: 00:e0:81:5e:bd:f5
> pci0: <display, VGA> at device 6.0 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A, console
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> ppc0: cannot reserve I/O port range
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062e300, 0) error 6
> ad4: 238475MB <Seagate ST3250820NS 3.AEE> at ata2-master UDMA33
> GEOM_MIRROR: Device gm0 created (id=4289931757).
> GEOM_MIRROR: Device gm0: provider ad4 detected.
> ad6: 238475MB <Seagate ST3250820NS 3.AEE> at ata3-master UDMA33
> SMP: AP CPU #1 Launched!
> GEOM_MIRROR: Device gm0: provider ad6 detected.
> GEOM_MIRROR: Device gm0: provider ad6 activated.
> GEOM_MIRROR: Device gm0: provider ad4 activated.
> GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
> Trying to mount root from ufs:/dev/mirror/gm0s1a
>
>
> _______________________________________________
> freebsd-amd64 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
> To unsubscribe, send any mail to "freebsd-amd64-unsubscribe at freebsd.org"
>   


-- 
O. Hartmann
Freie Universitaet Berlin
Institut fuer Geowissenschaften
Fernerkundung der Erde und Planeten
Malteser-Str. 74 - 100/Haus D
D-12249 Berlin

Tel.: +49 (0) 30 838 70 508
FAX:  +49 (0) 30 838 70 837