Asus M2NPV-MX success

Sat Nov 25 13:27:49 PST 2006

Although I know that send-pr is the right way to update the motherboard 
compatibility list, I'll just drop a note on this list about success with the 
Asus M2NPV-MX board -- that way Google and thus potential users can find it.

The Asus M2NPV-VM is already on the list, described by Bernd Selig. It doesn't 
work according to the list in 6.1-R; I'm using 6.2-PRE and the -MX board 
(same nForce430, same GeForce 6150) is mostly fine.

Let's take a look at what "mostly" means:

ACPI is fine. Compared to the last NF430 board I bought, where I needed a hex 
editor to fix the DSDT.

I have not tried suspending this machine yet, nor using powernow or cpufreq. I 
mean, kldload cpufreq recognizes both cores, and then I have no clue what to 
do with it.

mbmon gives reasonable temperature values and totally bogus rotation and 
voltage reports. nfsmb module loads (hoping to use mbmon -S) but then I don't 
know what to do with it.

OHCI and EHCI are fine.

SATA controller is fine; don't have any SATA II drives to try SATA 300 with, 
though. Have not tried the nvRAID functionality yet either.

nve is fine. Haven't pushed more than a few GB through it so far moving DVD 
rips around, but doesn't seem to have issues.

By using Ariff Abdullah's HDA driver ( 
http://lists.freebsd.org/pipermail/freebsd-current/2006-October/066357.html ) 
sound works. Tipitina sounds just great.

By patching xorg 6.9.0 with openSUSE's changes I got xorg to recognize the 
6150 with the nv driver. Dual head setups seem out of the question though; 
I've been searching around and get no end of conflicting reports about it.

=== dmesg follows
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sat Nov 25 22:27:49 CET 2006
    root at eggs.englishbreakfastnetwork.org:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2405.03-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
  Cores per package: 2
real memory  = 2112815104 (2014 MB)
avail memory = 2028183552 (1934 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at 
device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at 
device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port 
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 
0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP51 SATA300 controller> port 
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 
0xfe02c000-0xfe02cfff irq 20 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
rl0: <RealTek 8139 10/100BaseTX> port 0x9c00-0x9cff mem 0xfdbff000-0xfdbff0ff 
irq 17 at device 9.0 on pci4
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0a:cd:0e:28:b3
pci0: <multimedia> at device 16.1 (no driver attached)
nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0xc800-0xc807 mem 
0xfe02b000-0xfe02bfff irq 22 at device 20.0 on pci0
nve0: Ethernet address 00:17:31:7f:a8:ad
miibus1: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nve0: Ethernet address: 00:17:31:7f:a8:ad
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDROM <TSSTcorpDVD-ROM SH-D162C/TS01> at ata0-master UDMA33
acd1: CDRW <LITE-ON LTR-48246S/SS0B> at ata0-slave UDMA33
ad4: 194481MB <Maxtor 6L200M0 BANC1E00> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
pcm0: <NVidia MCP51 High Definition Audio Controller> mem 
0xfe024000-0xfe027fff irq 21 at device 16.1 on pci0
pcm0: <HDA Codec: Analog Device AD1986A>
pcm0: <HDA Driver Revision: 20061017_0033>

-- 
These are your friends - Adem
    GPG: FEA2 A3FE Adriaan de Groot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-amd64/attachments/20061125/4bb6bb42/attachment.pgp