amd64/99385: sucessful test of RAID on ga-k8n51GMF-9 motherboard
Brian Reichert
reichert at numachi.com
Fri Jun 23 17:50:22 UTC 2006
>Number: 99385
>Category: amd64
>Synopsis: sucessful test of RAID on ga-k8n51GMF-9 motherboard
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: update
>Submitter-Id: current-users
>Arrival-Date: Fri Jun 23 17:50:16 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Brian Reichert
>Release: FreeBSD 6.1-RELEASE amd64
>Organization:
Numachi
>Environment:
System: FreeBSD testing.numachi.com 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:04:14 UTC 2006 root at bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
In reviewing:
http://www.freebsd.org/platforms/amd64/motherboards.html
I note that the RAID is considered untested. I've been able to
install 6.1-R on a mirrored RAID volume.
The BIOS and RAID utlilties were bit bit obtuse, but I was able
to get a RAID volume up and bootable. In the RAID utility in
particular, you had to expressly set a 'bootable' flag for the
boot process to see it.
One item of note: this motherboard supports four SATA drives. It
has two pairs of SATA ports, usefully lableled 1-2, 3-4. I found
that if I used ports 1+2, FreeBSD could only see one of the two
drives. If I used ports 1+3, FreeBSD could see both drives.
If I tried to build a RAID with ports 1+2, FreeBSD could see the
volume, but only one drive, and complained a lot.
My current config: two 250G SATA 2 drives, in ports 1+3, in a
mirrored volume. Snippets from dmesg:
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 238474MB <Seagate ST3250824AS 3.AAD> at ata2-master SATA300
ad4: 488395055 sectors [484518C/16H/63S] 16 sectors/interrupt 1 depth queue
******** ATA nVidia MediaShield Metadata ********
nvidia_id <NVIDIA >
config_size 30
checksum 0xede8c579
version 0x0064
disk_number 0
dummy_0 0x00
total_sectors 488395008
sectors_size 512
serial MIRROR 232.88G
revision
dummy_1 0x00000000
magic_0 0x00640044
magic_1 0x557a925c3cb22c4d
magic_2 0x61b30330621f01db
flags 0x03
array_width 1
total_disks 2
dummy_2 0x01
type RAID1
dummy_3 0x0000
stripe_sectors 128
stripe_bytes 65536
stripe_shift 7
stripe_mask 0x0000007f
stripe_sizesectors 128
stripe_sizebytes 65536
rebuild_lba 0
dummy_4 0x00000081
dummy_5 0x1d1c5100
status 0x00000001
=================================================
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 238474MB <Seagate ST3250824AS 3.AAD> at ata4-master SATA300
ad8: 488395055 sectors [484518C/16H/63S] 16 sectors/interrupt 1 depth queue
******** ATA nVidia MediaShield Metadata ********
nvidia_id <NVIDIA >
config_size 30
checksum 0xede7c479
version 0x0064
disk_number 1
dummy_0 0x00
total_sectors 488395008
sectors_size 512
serial MIRROR 232.88G
revision
dummy_1 0x00000100
magic_0 0x00640044
magic_1 0x557a925c3cb22c4d
magic_2 0x61b30330621f01db
flags 0x03
array_width 1
total_disks 2
dummy_2 0x01
type RAID1
dummy_3 0x0000
stripe_sectors 128
stripe_bytes 65536
stripe_shift 7
stripe_mask 0x0000007f
stripe_sizesectors 128
stripe_sizebytes 65536
rebuild_lba 0
dummy_4 0x00000081
dummy_5 0x1d1c5100
status 0x00000001
=================================================
GEOM: new disk ad4
GEOM: new disk ad8
...
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format nVidia MediaShield
type RAID1
flags 0x01 1<READY>
magic_0 0x557a925c3cb22c4d
magic_1 0x61b30330621f01db
generation 0
total_sectors 488395008
offset_sectors 0
heads 255
sectors 63
cylinders 30401
width 1
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 488395008
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad8: sectors 488395008
=================================================
ar0: 238474MB <nVidia MediaShield RAID1> status: READY
ar0: 488395008 sectors [30401C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad8 at ata4-master
GEOM: new disk ar0
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-amd64
mailing list