SMP system not running SMP
Pete French
petefrench at ticketswitch.com
Fri Jun 23 16:52:20 UTC 2006
> Erm, ok. Can you get the mptable output and a verbose dmesg with the SCSI
> card in the box and an i386 SMP kernel?
Possibly - booting the SMP kernel with the SCSI card in the box means
booting in safe mode though, or it just wont come up. I am remote to the
box currently, but here is the mptable output from it booted with a
non-SMP kernel if that helps ?
Will try and get the results from an SMP kernel at the weekend.
-pete.
===============================================================================
MPTable
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000ff780
signature: '_MP_'
length: 16 bytes
version: 1.1
checksum: 0xf1
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000fa300
signature: 'PCMP'
base table length: 324
version: 1.1
checksum: 0xb0
OEM ID: 'MSI '
Product ID: 'RHAPSODY '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 32
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x10 BSP, usable 15 5 1 0x78bfbff
1 0x10 AP, usable 15 5 1 0x78bfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
3 0x11 usable 0xfebfe000
4 0x11 usable 0xfebff000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 4 0 2 0
INT active-hi edge 4 1 2 1
INT active-hi edge 4 0 2 2
INT active-hi edge 4 3 2 3
INT active-hi edge 4 4 2 4
INT active-hi edge 4 6 2 6
INT active-hi edge 4 7 2 7
INT active-hi edge 4 8 2 8
INT active-hi edge 4 12 2 12
INT active-hi edge 4 13 2 13
INT active-hi edge 4 14 2 14
INT active-hi edge 4 15 2 15
INT active-lo level 0 7:D 2 19
INT active-lo level 3 0:D 2 19
INT active-lo level 3 8:A 2 16
INT active-lo level 3 6:A 2 18
INT active-lo level 2 3:A 3 0
INT active-lo level 1 1:A 4 0
INT active-lo level 1 2:A 4 1
INT active-lo level 1 2:B 4 2
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 0 0:A 255 0
NMI active-hi edge 0 0:A 255 1
===============================================================================
More information about the freebsd-amd64
mailing list