Sun X4100 LSI1064 support
David Paul Zimmerman
dpz at ack.berkeley.edu
Fri Jan 6 17:47:24 PST 2006
Hi, all. We recently purchased a Sun X4100, which has the built-in
LSI1064 SAS adapter. So far a lot of stuff seems to work:
- autoboots the amd64 6.0-RELEASE disc1 CD
- USB keyboard and VGA monitor connected to the back work great
- gets all the way to the FreeBSD setup menu
but it can't actually start the installation because it doesn't see
either of the two Fujitsu 73GB SAS drives. I've got an external USB
hard drive on order now, but that's just a temporary measure to mess
around with the thing. Does anyone know of any efforts underway for
LSI1064 support?
If it's of any interest to anyone, here's a screenscrape of the device
probing during boot. (Pardon the dust, the method of capturing this
was kind of unnatural.) Note pci2.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
* The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005
root at rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <SUN X4100 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2193.77-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
evaavail memory = 1021034496 (973 MB)ris Operating Environment
versions 8 and 9, and EMADT: Forcing active-low polarity and level
trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboardSun Java Enterprise
System 2005Q1 Inioapic2 <Version 1.1> irqs 28-31 on motherboardct
documentation.
ioapic3 <Version 1.1> irqs 32-35 on motherboard
ioapic4 <Version 1.1> irqs 36-39 on motherboard
acpi0: <SUN X4100> on motherboard
acpi0: Power Button (fixed)set /SYS (y/n)? yease wait.
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0opped.
pci_link1: <ACPI PCI Link LNKB> irq 9 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0start /SP/console (y/n)? y
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0x9c00-0x9c3f mem 0xfbfe0000-0xfbffffff irq 26 at device 1.0 on pci1
em0: Ethernet address: 00:14:4f:01:a4:94
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0x9800-0x983f mem 0xfbfc0000-0xfbfdffff irq 27 at device 1.1 on pci1
em1: Ethernet address: 00:14:4f:01:a4:95
em1: Speed:N/A Duplex:N/A
em2: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0x9400-0x943f mem 0xfbfa0000-0xfbfbffff irq 24 at device 2.0 on pci1
em2: Ethernet address: 00:14:4f:01:a4:96
em2: Speed:N/A Duplex:N/A
em3: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0x9000-0x903f mem 0xfbf80000-0xfbf9ffff irq 25 at device 2.1 on pci1
em3: Ethernet address: 00:14:4f:01:a4:97
em3: Speed:N/A Duplex:N/A
pci0: <base peripheral, interrupt controller> at device 1.1 (no driver
attached)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <mass storage, SCSI> at device 3.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 2.1 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ohci0: <OHCI (generic) USB controller> mem 0xfe3fe000-0xfe3fefff irq 19
at device 0.0 on pci3
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe3fd000-0xfe3fdfff irq 19
at device 0.1 on pci3
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci3: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pci4: <base peripheral, interrupt controller> at device 1.1 (no driver
attached)
pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci4
pci6: <ACPI PCI bus> on pcib6
pci4: <base peripheral, interrupt controller> at device 2.1 (no driver
attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000
-0xccfff,0xcd000-0xcdfff,0xce000-0xd27ff,0xd2800-0xd37ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd0: American Megatrends Inc. Virtual Keyboard and Mouse, rev
1.10/1.00, addr 2, iclass 3/1
kbd0 at ukbd0
ums0: American Megatrends Inc. Virtual Keyboard and Mouse, rev
1.10/1.00, addr 2, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: American Megatrends Inc. Virtual Cdrom Device, rev 1.10/1.00,
addr 2
umass1: American Megatrends Inc. Virtual Floppy Device, rev 1.10/1.00,
addr 3
Timecounter "TSC" frequency 2193768290 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80970f68
acd0: DVDROM <DV-28SL/1.0A> at ata0-master UDMA33
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <AMI Virtual CDROM 1.00> Removable CD-ROM SCSI-0 device
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: UNIT ATTENTION, Not ready to
ready change, medium may have changed
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <AMI Virtual Floppy 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: UNIT ATTENTION, Not ready to
ready change,
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim1:1:0:0): Not ready to ready change, medium may have
changed
(da0:umass-sim1:1:0:0): Retrying Command (per Sense Data)
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim1:1:0:0): Not ready to ready change, medium may have
changed
(da0:umass-sim1:1:0:0): Retrying Command (per Sense Data)
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim1:1:0:0): Not ready to ready change, medium may have
changed
(da0:umass-sim1:1:0:0): Retrying Command (per Sense Data)
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim1:1:0:0): Not ready to ready change, medium may have
changed
(da0:umass-sim1:1:0:0): Retrying Command (per Sense Data)
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
Trying to mount root from ufs:/dev/md0
More information about the freebsd-amd64
mailing list