mpt broken on amd64?
mjacob at freebsd.org
mjacob at freebsd.org
Wed Aug 23 08:25:18 UTC 2006
Well, for at least one class of amd64, the onboard ultra4 works and
works in raid mode and is swellness.
I really wish I had a real AMD server to work with- I had one for a
while at DataDomain, but that was months ago. I asked donations and got
bupkas. I spent 2K$ of my own to get a decent em64t with 8GB, and have
had a couple of em64ts come my way since then, but no 'real' AMD
systems- if that would even make a difference.
I'll try and analyze some stuff here and think about it. If this box is
in production I'll likely have to try and chase another box with a
similar chipset with the same level of f/w to try and guess what has
occurred. I certainly have some theories, but nothing to really yack
about at present.
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #56: Wed Aug 23 01:03:51 PDT 2006
mjacob at ov2.in1.lcl:/home/FreeBSD/FreeBSD-current/src/sys/amd64/compile/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Using 32 colors for the VM-PQ tuning (0, 0)
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80b59000.
Preloaded elf obj module "/boot/kernel/isp_2300.ko" at 0xffffffff80b591d0.
Calibrating clock(s) ... i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793013433 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,XTPR>
AMD Features=0x20100800<SYSCALL,NX,LM>
Logical CPUs per core: 2
usable memory = 1061306368 (1012 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000c56000 - 0x000000003e198fff, 1028927488 bytes (251203 pages)
avail memory = 1023004672 (975 MB)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec80000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
MADT: Found IO APIC ID 4, Interrupt 48 at 0xfec80400
ioapic2: intpin 0 -> PCI IRQ 48 (level, low)
ioapic2: intpin 1 -> PCI IRQ 49 (level, low)
ioapic2: intpin 2 -> PCI IRQ 50 (level, low)
ioapic2: intpin 3 -> PCI IRQ 51 (level, low)
ioapic2: intpin 4 -> PCI IRQ 52 (level, low)
ioapic2: intpin 5 -> PCI IRQ 53 (level, low)
ioapic2: intpin 6 -> PCI IRQ 54 (level, low)
ioapic2: intpin 7 -> PCI IRQ 55 (level, low)
ioapic2: intpin 8 -> PCI IRQ 56 (level, low)
ioapic2: intpin 9 -> PCI IRQ 57 (level, low)
ioapic2: intpin 10 -> PCI IRQ 58 (level, low)
ioapic2: intpin 11 -> PCI IRQ 59 (level, low)
ioapic2: intpin 12 -> PCI IRQ 60 (level, low)
ioapic2: intpin 13 -> PCI IRQ 61 (level, low)
ioapic2: intpin 14 -> PCI IRQ 62 (level, low)
ioapic2: intpin 15 -> PCI IRQ 63 (level, low)
ioapic2: intpin 16 -> PCI IRQ 64 (level, low)
ioapic2: intpin 17 -> PCI IRQ 65 (level, low)
ioapic2: intpin 18 -> PCI IRQ 66 (level, low)
ioapic2: intpin 19 -> PCI IRQ 67 (level, low)
ioapic2: intpin 20 -> PCI IRQ 68 (level, low)
ioapic2: intpin 21 -> PCI IRQ 69 (level, low)
ioapic2: intpin 22 -> PCI IRQ 70 (level, low)
ioapic2: intpin 23 -> PCI IRQ 71 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic1: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
registered firmware set <isp_2300>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd0 at kbdmux0
io: <I/O>
mem: <memory>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Aug 23 2006 01:01:59)
acpi0: <A M I OEMRSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8003202c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086)
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 15 N 0 3 4 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 15 N 0 3 4 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x410
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3590, revid=0x0c
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3591, revid=0x0c
bus=0, slot=0, func=1
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0100, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3594, revid=0x0c
bus=0, slot=1, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
MSI supports 2 messages
map[10]: type 1, range 32, base fcaff000, size 12, memory disabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3595, revid=0x0c
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3599, revid=0x0c
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x359a, revid=0x0c
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, enabled
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00000540, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 3
pcib1: I/O decode 0xc000-0xdfff
pcib1: memory decode 0xfcb00000-0xfcffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=1, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xfcb00000-0xfcefffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1000, dev=0x0640, revid=0x01
bus=2, slot=3, func=0
class=0c-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 0000c400, size 8, enabled
pcib2: (null) requested I/O range 0xc400-0xc4ff: in range
pcib1: (null) requested I/O range 0xc400-0xc4ff: in range
map[14]: type 1, range 64, base fcebc000, size 14, enabled
pcib2: (null) requested memory range 0xfcebc000-0xfcebffff: good
pcib1: (null) requested memory range 0xfcebc000-0xfcebffff: good
map[1c]: type 1, range 64, base fcea0000, size 16, enabled
pcib2: (null) requested memory range 0xfcea0000-0xfceaffff: good
pcib1: (null) requested memory range 0xfcea0000-0xfceaffff: good
pcib2: matched entry for 2.3.INTA
pcib2: slot 3 INTA hardwired to IRQ 24
found-> vendor=0x1000, dev=0x0030, revid=0x08
bus=2, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 0000c800, size 8, enabled
pcib2: (null) requested I/O range 0xc800-0xc8ff: in range
pcib1: (null) requested I/O range 0xc800-0xc8ff: in range
map[14]: type 1, range 64, base fced0000, size 16, enabled
pcib2: (null) requested memory range 0xfced0000-0xfcedffff: good
pcib1: (null) requested memory range 0xfced0000-0xfcedffff: good
map[1c]: type 1, range 64, base fcec0000, size 16, enabled
pcib2: (null) requested memory range 0xfcec0000-0xfcecffff: good
pcib1: (null) requested memory range 0xfcec0000-0xfcecffff: good
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 26
found-> vendor=0x1000, dev=0x0030, revid=0x08
bus=2, slot=5, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 0000cc00, size 8, enabled
pcib2: (null) requested I/O range 0xcc00-0xccff: in range
pcib1: (null) requested I/O range 0xcc00-0xccff: in range
map[14]: type 1, range 64, base fcef0000, size 16, enabled
pcib2: (null) requested memory range 0xfcef0000-0xfcefffff: good
pcib1: (null) requested memory range 0xfcef0000-0xfcefffff: good
map[1c]: type 1, range 64, base fcee0000, size 16, enabled
pcib2: (null) requested memory range 0xfcee0000-0xfceeffff: good
pcib1: (null) requested memory range 0xfcee0000-0xfceeffff: good
pcib2: matched entry for 2.5.INTB
pcib2: slot 5 INTB hardwired to IRQ 25
mpt0: <LSILogic FC7X04X 4Gb/s FC Adapter> port 0xc400-0xc4ff mem 0xfcebc000-0xfcebffff,0xfcea0000-0xfceaffff irq 24 at device 3.0 on pci2
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc400
mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xfcebc000
ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.10.0
mpt0: Port 0: LinkState: Failed
mpt0: External Bus Reset Detected
mpt0: Port 0x0: FC LinkEvent: LIP(f7,f7) (Loop Initialization)
mpt0: Device needs AL_PA
mpt0: Port 0x0: FC LinkEvent: LIP(f7,f7) (Loop Initialization)
mpt0: Device needs AL_PA
mpt0: Port 0x0: FC LinkEvent: LIP(f7,f7) (Loop Initialization)
mpt0: Device needs AL_PA
mpt0: Port 0: LinkState: Active
mpt0: Rescan Port: 0
mpt0: FC Port Page 0: Topology <F-Port> WWNN 0x200000062b0e1638 WWPN 0x100000062b0e1638 Speed 2-Gbit
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xc800-0xc8ff mem 0xfced0000-0xfcedffff,0xfcec0000-0xfcecffff irq 26 at device 5.0 on pci2
mpt1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
mpt1: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xfced0000
ioapic1: routing intpin 2 (PCI IRQ 26) to vector 50
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.14.0
mpt1: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt1: 0 Active Volumes (0 Max)
mpt1: 0 Hidden Drive Members (0 Max)
mpt2: <LSILogic 1030 Ultra4 Adapter> port 0xcc00-0xccff mem 0xfcef0000-0xfcefffff,0xfcee0000-0xfceeffff irq 25 at device 5.1 on pci2
mpt2: Reserved 0x100 bytes for rid 0x10 type 4 at 0xcc00
mpt2: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xfcef0000
ioapic1: routing intpin 1 (PCI IRQ 25) to vector 51
mpt2: [GIANT-LOCKED]
mpt2: MPI Version=1.2.14.0
mpt2: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt2: 1 Active Volume (1 Max)
mpt2: 4 Hidden Drive Members (6 Max)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xd000-0xdfff
pcib3: memory decode 0xfcf00000-0xfcffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=3, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base fcf00000, size 17, enabled
pcib3: (null) requested memory range 0xfcf00000-0xfcf1ffff: good
pcib1: (null) requested memory range 0xfcf00000-0xfcf1ffff: good
map[20]: type 4, range 32, base 0000d880, size 6, enabled
pcib3: (null) requested I/O range 0xd880-0xd8bf: in range
pcib1: (null) requested I/O range 0xd880-0xd8bf: in range
pcib3: matched entry for 3.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 54
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=3, slot=4, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base fcfc0000, size 17, enabled
pcib3: (null) requested memory range 0xfcfc0000-0xfcfdffff: good
pcib1: (null) requested memory range 0xfcfc0000-0xfcfdffff: good
map[20]: type 4, range 32, base 0000dc00, size 6, enabled
pcib3: (null) requested I/O range 0xdc00-0xdc3f: in range
pcib1: (null) requested I/O range 0xdc00-0xdc3f: in range
pcib3: matched entry for 3.4.INTB
pcib3: slot 4 INTB hardwired to IRQ 55
found-> vendor=0x8086, dev=0x1026, revid=0x04
bus=3, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base fcfe0000, size 17, enabled
pcib3: (null) requested memory range 0xfcfe0000-0xfcffffff: good
pcib1: (null) requested memory range 0xfcfe0000-0xfcffffff: good
map[18]: type 1, range 64, base fcf80000, size 18, enabled
pcib3: (null) requested memory range 0xfcf80000-0xfcfbffff: good
pcib1: (null) requested memory range 0xfcf80000-0xfcfbffff: good
map[20]: type 4, range 32, base 0000dc80, size 6, enabled
pcib3: (null) requested I/O range 0xdc80-0xdcbf: in range
pcib1: (null) requested I/O range 0xdc80-0xdcbf: in range
pcib3: matched entry for 3.9.INTA
pcib3: slot 9 INTA hardwired to IRQ 50
em0: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0xd880-0xd8bf mem 0xfcf00000-0xfcf1ffff irq 54 at device 4.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfcf00000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xd880
em0: bpf attached
em0: Ethernet address: 00:04:23:ca:00:7c
ioapic2: routing intpin 6 (PCI IRQ 54) to vector 52
em0: [FAST]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0xdc00-0xdc3f mem 0xfcfc0000-0xfcfdffff irq 55 at device 4.1 on pci3
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfcfc0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xdc00
em1: bpf attached
em1: Ethernet address: 00:04:23:ca:00:7d
ioapic2: routing intpin 7 (PCI IRQ 55) to vector 53
em1: [FAST]
em2: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0xdc80-0xdcbf mem 0xfcfe0000-0xfcffffff,0xfcf80000-0xfcfbffff irq 50 at device 9.0 on pci3
em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfcfe0000
em2: Reserved 0x40 bytes for rid 0x20 type 4 at 0xdc80
em2: bpf attached
em2: Ethernet address: 00:04:23:cb:1e:94
ioapic2: routing intpin 2 (PCI IRQ 50) to vector 54
em2: [FAST]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0x0-0x0
pcib4: prefetched decode 0x0-0x0
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x0-0x0
pcib5: memory decode 0x0-0x0
pcib5: prefetched decode 0x0-0x0
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xe000-0xefff
pcib6: memory decode 0xfd000000-0xfebfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pcib6: Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=6, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib6: (null) requested memory range 0xfd000000-0xfdffffff: good
map[14]: type 4, range 32, base 0000ec00, size 8, enabled
pcib6: (null) requested I/O range 0xec00-0xecff: in range
map[18]: type 1, range 32, base febff000, size 12, enabled
pcib6: (null) requested memory range 0xfebff000-0xfebfffff: good
pcib6: matched entry for 6.12.INTA
pcib6: slot 12 INTA hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 17 at device 12.0 on pci6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FAST]
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xce7ff,0xce800-0xcf7ff,0xcf800-0xd07ff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
linprocfs registered
linsysfs registered
lapic: Divisor 2, Frequency 99750485 hz
Timecounter "TSC" frequency 2793013433 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
mpt0: FC Logout Port: 0 N_PortID: fffffc
mpt0: FC Logout Port: 0 N_PortID: fffc01
em0: Link is up 100 Mbps Full Duplex
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ad0: setting PIO4 on ICH5 chip
ad0: setting WDMA2 on ICH5 chip
ad0: 499MB <M-Systems iDOC V1.11 051102> at ata0-master WDMA2
ad0: 1023120 sectors [1015C/16H/63S] 1 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
mpt2:vol0(mpt2:0:0): Settings ( Hot-Plug-Spares High-Priority-ReSync )
mpt2:vol0(mpt2:0:0): Using Spare Pool: 0
mpt2:vol0(mpt2:0:0): 4 Members:
(mpt2:0:0): Stripe Position 0
(mpt2:0:1): Stripe Position 1
(mpt2:0:0): Stripe Position 2
(mpt2:0:3): Stripe Position 3
mpt2:vol0(mpt2:0:0): RAID-1E - Degraded
mpt2:vol0(mpt2:0:0): Status ( Enabled )
(mpt2:vol0:1): Physical (mpt2:0:1), Pass-thru (mpt2:1:1)
(mpt2:vol0:1): Online
(mpt2:vol0:3): Physical (mpt2:0:3), Pass-thru (mpt2:1:3)
(mpt2:vol0:3): Online
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
Waiting 5 seconds for SCSI devices to settle
mpt1: Issuing TMF 0xffffffff80e3d160:94 with MsgContext of 0x20004
mpt1: TMF complete: req 0xffffffff80e3d160:94 status 0x0
mpt2: Issuing TMF 0xffffffff80e4b160:102 with MsgContext of 0x20004
mpt2: TMF complete: req 0xffffffff80e4b160:102 status 0x0
(probe0:mpt2:1:0:0): error 22
(probe0:mpt2:1:0:0): Unretryable Error
(probe0:mpt2:1:0:0): error 22
(probe0:mpt2:1:0:0): Unretryable Error
(probe257:mpt2:0:0:0): error 22
(probe257:mpt2:0:0:0): Unretryable Error
(probe257:mpt2:0:0:0): error 22
(probe257:mpt2:0:0:0): Unretryable Error
(probe258:mpt2:1:1:0): Retrying Command
(probe257:mpt2:0:0:0): tagged openings now 128
(probe257:mpt2:1:2:0): error 22
(probe257:mpt2:1:2:0): Unretryable Error
(probe258:mpt2:1:2:0): error 22
(probe258:mpt2:1:2:0): Unretryable Error
(probe258:mpt2:1:4:0): error 22
(probe258:mpt2:1:4:0): Unretryable Error
(probe258:mpt2:1:5:0): error 22
(probe258:mpt2:1:5:0): Unretryable Error
(probe257:mpt2:0:4:0): Retrying Command
(probe0:mpt2:1:4:0): error 22
(probe0:mpt2:1:4:0): Unretryable Error
(probe0:mpt2:1:5:0): error 22
(probe0:mpt2:1:5:0): Unretryable Error
(probe0:mpt2:0:5:0): Retrying Command
(probe0:mpt2:0:6:0): AutoSense Failed
(probe0:mpt2:0:6:0): error 5
(probe0:mpt2:0:6:0): Unretryable Error
(probe0:mpt2:0:6:1): error 22
(probe0:mpt2:0:6:1): Unretryable Error
(probe0:mpt2:0:6:2): error 22
(probe0:mpt2:0:6:2): Unretryable Error
(probe0:mpt2:0:6:3): error 22
(probe0:mpt2:0:6:3): Unretryable Error
(probe0:mpt2:0:6:4): error 22
(probe0:mpt2:0:6:4): Unretryable Error
(probe0:mpt2:0:6:5): error 22
(probe0:mpt2:0:6:5): Unretryable Error
(probe0:mpt2:0:6:6): error 22
(probe0:mpt2:0:6:6): Unretryable Error
(probe0:mpt2:0:6:7): error 22
(probe0:mpt2:0:6:7): Unretryable Error
(probe0:mpt2:0:8:0): Retrying Command
(probe0:mpt2:0:9:0): Retrying Command
(probe0:mpt2:0:10:0): Retrying Command
(probe0:mpt2:0:11:0): Retrying Command
(probe0:mpt2:0:12:0): Retrying Command
(probe0:mpt2:0:13:0): Retrying Command
(probe0:mpt2:0:14:0): Retrying Command
(probe0:mpt2:0:15:0): Retrying Command
(probe1:mpt0:0:0:0): Retrying Command
(probe2:mpt0:0:1:0): Retrying Command
(probe3:mpt0:0:2:0): Retrying Command
(probe4:mpt0:0:3:0): Retrying Command
(probe5:mpt0:0:4:0): Retrying Command
(probe6:mpt0:0:5:0): Retrying Command
pass0 at mpt0 bus 0 target 0 lun 0
pass0: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
pass0: Serial Number 3JA12BDL00007333XGSV
pass0: 200.000MB/s transfers, Tagged Queueing Enabled
pass1 at mpt0 bus 0 target 1 lun 0
pass1: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
pass1: Serial Number 3JA12CN70000733275TG
pass1: 200.000MB/s transfers, Tagged Queueing Enabled
pass2 at mpt0 bus 0 target 2 lun 0
pass2: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
pass2: Serial Number 3JA112ZP00007332JRQP
pass2: 200.000MB/s transfers, Tagged Queueing Enabled
pass3 at mpt0 bus 0 target 3 lun 0
pass3: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
pass3: Serial Number 3JA129V400007332P8QF
pass3: 200.000MB/s transfers, Tagged Queueing Enabled
pass4 at mpt0 bus 0 target 4 lun 0
pass4: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
pass4: Serial Number 3JA12ADB000073324G2E
pass4: 200.000MB/s transfers, Tagged Queueing Enabled
pass5 at mpt0 bus 0 target 5 lun 0
pass5: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
pass5: Serial Number 3JA12AZ600007332JRJ3
pass5: 200.000MB/s transfers, Tagged Queueing Enabled
pass6 at mpt1 bus 0 target 6 lun 0
pass6: <ESG-SHV SCA HSBP M29 1.08> Fixed Processor SCSI-2 device
pass6: Serial Number 1
pass6: 3.300MB/s transfers
pass7 at mpt2 bus 0 target 0 lun 0
pass7: <LSILOGIC 1030 IE 1000> Fixed Direct Access SCSI-2 device
pass7: 3.300MB/s transfers, Tagged Queueing Enabled
pass8 at mpt2 bus 0 target 4 lun 0
pass8: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass8: Serial Number D80A44PK
pass8: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass9 at mpt2 bus 0 target 5 lun 0
pass9: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass9: Serial Number D80AKC4K
pass9: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass10 at mpt2 bus 0 target 6 lun 0
pass10: <DELL PV22XS E.17> Fixed Processor SCSI-3 device
pass10: 3.300MB/s transfers
pass11 at mpt2 bus 0 target 8 lun 0
pass11: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass11: Serial Number D80A9QFK
pass11: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass12 at mpt2 bus 0 target 9 lun 0
pass12: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass12: Serial Number D80A9QAK
pass12: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass13 at mpt2 bus 0 target 10 lun 0
pass13: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass13: Serial Number D809YPAK
pass13: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass14 at mpt2 bus 0 target 11 lun 0
pass14: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass14: Serial Number D809NCGK
pass14: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass15 at mpt2 bus 0 target 12 lun 0
pass15: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass15: Serial Number D809X3NK
pass15: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass16 at mpt2 bus 0 target 13 lun 0
pass16: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass16: Serial Number D80AAH5K
pass16: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass17 at mpt2 bus 0 target 14 lun 0
pass17: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass17: Serial Number D80AAHKK
pass17: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass18 at mpt2 bus 0 target 15 lun 0
pass18: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
pass18: Serial Number D80AA2ZK
pass18: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass19 at mpt2 bus 1 target 1 lun 0
pass19: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed unknown SCSI-3 device
pass19: Serial Number D80ARSNK
pass19: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass20 at mpt2 bus 1 target 3 lun 0
pass20: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed unknown SCSI-3 device
pass20: Serial Number D809GLMK
pass20: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
ses0 at mpt1 bus 0 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M29 1.08> Fixed Processor SCSI-2 device
ses0: Serial Number 1
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
ses1 at mpt2 bus 0 target 6 lun 0
ses1: <DELL PV22XS E.17> Fixed Processor SCSI-3 device
ses1: 3.300MB/s transfers
ses1: SAF-TE Compliant Device
pass19 at mpt2 bus 1 target 1 lun 0
pass19: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed unknown SCSI-3 device
pass19: Serial Number D80ARSNK
pass19: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
pass20 at mpt2 bus 1 target 3 lun 0
pass20: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed unknown SCSI-3 device
pass20: Serial Number D809GLMK
pass20: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da6 at mpt2 bus 0 target 0 lun 0
da6: <LSILOGIC 1030 IE 1000> Fixed Direct Access SCSI-2 device
da6: 3.300MB/s transfers, Tagged Queueing Enabled
da6: 572156MB (1171775488 512 byte sectors: 255H 63S/T 72939C)
da7 at mpt2 bus 0 target 4 lun 0
da7: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da7: Serial Number D80A44PK
da7: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da7: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da8 at mpt2 bus 0 target 5 lun 0
da8: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da8: Serial Number D80AKC4K
da8: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da8: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da9 at mpt2 bus 0 target 8 lun 0
da9: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da9: Serial Number D80A9QFK
da9: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da9: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da10 at mpt2 bus 0 target 9 lun 0
da10: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da10: Serial Number D80A9QAK
da10: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da10: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da11 at mpt2 bus 0 target 10 lun 0
da11: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da11: Serial Number D809YPAK
da11: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da11: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da12 at mpt2 bus 0 target 11 lun 0
da12: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da12: Serial Number D809NCGK
da12: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da12: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da13 at mpt2 bus 0 target 12 lun 0
da13: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da13: Serial Number D809X3NK
da13: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da13: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da14 at mpt2 bus 0 target 13 lun 0
da14: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da14: Serial Number D80AAH5K
da14: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da14: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da15 at mpt2 bus 0 target 14 lun 0
da15: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da15: Serial Number D80AAHKK
da15: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da15: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da16 at mpt2 bus 0 target 15 lun 0
da16: <MAXTOR ATLAS10K5_300SCA JNZM> Fixed Direct Access SCSI-3 device
da16: Serial Number D80AA2ZK
da16: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da16: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
da0: Serial Number 3JA12BDL00007333XGSV
da0: 200.000MB/s transfers, Tagged Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
da1: Serial Number 3JA12CN70000733275TG
da1: 200.000MB/s transfers, Tagged Queueing Enabled
da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da2 at mpt0 bus 0 target 2 lun 0
da2: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
da2: Serial Number 3JA112ZP00007332JRQP
da2: 200.000MB/s transfers, Tagged Queueing Enabled
da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da3 at mpt0 bus 0 target 3 lun 0
da3: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
da3: Serial Number 3JA129V400007332P8QF
da3: 200.000MB/s transfers, Tagged Queueing Enabled
da3: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da4 at mpt0 bus 0 target 4 lun 0
da4: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
da4: Serial Number 3JA12ADB000073324G2E
da4: 200.000MB/s transfers, Tagged Queueing Enabled
da4: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da5 at mpt0 bus 0 target 5 lun 0
da5: <SEAGATE ST336607FC 0006> Fixed Direct Access SCSI-3 device
da5: Serial Number 3JA12AZ600007332JRJ3
da5: 200.000MB/s transfers, Tagged Queueing Enabled
da5: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
GEOM: new disk da4
GEOM: new disk da5
GEOM: new disk da6
GEOM: new disk da7
GEOM: new disk da8
GEOM: new disk da9
GEOM: new disk da10
GEOM: new disk da11
GEOM: new disk da12
GEOM: new disk da13
GEOM: new disk da14
GEOM: new disk da15
GEOM: new disk da16
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
Trying to mount root from nfs:172.16.1.79:/home/FreeBSD/diskless/amd64_7
em0: Link is Down
NFS ROOT: 172.16.1.79:/home/FreeBSD/diskless/ov2
em0: Link is up 100 Mbps Full Duplex
start_init: trying /sbin/init
More information about the freebsd-amd64
mailing list