[PATCH] agp(4) for ULi M1689/nVidia nForce3

Ganael Laplanche ganael.laplanche at martymac.com
Wed Sep 21 12:31:20 PDT 2005 

Hi again,

Okay, I gave another try.

What I did :

- updated the BIOS to the latest version : 1011 for my K8NE-Deluxe
- disabled AGP Fastwrite in the BIOS
- compiled kernel without drm options

I can boot without kernel panic. But, If I execute testgart, I get a kernel
panic... The same as if I try to launch X.

What is good is I have an agp0 device detected. I must have had one on the first
test I did yesterday, but I must have missed it :-p

See dmesg attached.

Regards,

Ganaël LAPLANCHE
ganael.laplanche at martymac.com
http://www.martymac.com
Tel : (+33)6.84.03.57.24.

---------- Original Message -----------
From: Jung-uk Kim <jkim at FreeBSD.org>
To: "Ganael Laplanche" <ganael.laplanche at martymac.com>
Sent: Tue, 20 Sep 2005 16:03:52 -0400
Subject: Re: [PATCH] agp(4) for ULi M1689/nVidia nForce3

> On Tuesday 20 September 2005 03:59 pm, you wrote:
> > Hi,
> >
> > I tried the patch without drm support in the kernel. Again, I
> > crashed my machine, this time at X startup.
> 
> That's because Xorg tries to load drm.  I just want you to test agp(4) 
> with this:
> 
> http://people.freebsd.org/~jkim/testgart.c
> 
> > I have no more panic at boot time, neither do I have agp0 detected.
> 
> What do you mean by 'not detected'?  I'd like to see your verbose boot 
> dmesg.  Can you send it to me?
> 
> Thanks,
> 
> JK
> 
> > I don't know if it's related, but I updated my BIOS to the latest
> > revision as suggested by Adam Gregoire...
> >
> > Regards,
> >
> > [UTF-8?]Gana�l LAPLANCHE
> > ganael.laplanche at martymac.com
> > http://www.martymac.com
> > Tel : (+33)6.84.03.57.24.
> >
> > ---------- Original Message -----------
> > From: Jung-uk Kim <jkim at FreeBSD.org>
> > To: "Ganael Laplanche" <ganael.laplanche at martymac.com>
> > Cc: freebsd-amd64 at FreeBSD.org, "K.Wieland" <wieland.k at gmail.com>
> > Sent: Mon, 19 Sep 2005 17:13:40 -0400
> > Subject: Re: [PATCH] agp(4) for ULi M1689/nVidia nForce3
> >
> > > On Monday 19 September 2005 04:56 pm, Ganael Laplanche wrote:
> > > > Hi all,
> > > >
> > > > I've just tested the patch, but unfortunately, it didn't work
> > > > for me :( Kernel panic at bootup, with (nearly) this message :
> > > >
> > > > [...]
> > > > drm0: <ATI Radeon if R250 9000>
> > > > Fatal trap 12 : page fault while in kernel mode
> > > > [...]
> > > >
> > > > ... and the system reboots :(
> > >
> > > That's really strange.
> > >
> > > > Let me know if you want me to make further tests...
> > >
> > > You don't have to compile DRM in the kernel.  Xorg server will
> > > automatically load it when it's needed.  Please remove them from
> > > the configuration.  I just want to see if agp(4) works without
> > > drm.
> > >
> > > Thanks,
> > >
> > > Jung-uk Kim
> >
> > ------- End of Original Message -------
------- End of Original Message -------

-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #0: Wed Sep 21 20:39:58 CEST 2005
    martymac at odie.martymac.com:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2210.77-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 536608768 (511 MB)
avail memory = 510291968 (486 MB)
netsmb_dev: loaded
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LUS0> irq 9 on acpi0
pci_link6: <ACPI PCI Link LUS1> irq 9 on acpi0
pci_link7: <ACPI PCI Link LUS2> irq 10 on acpi0
pci_link8: <ACPI PCI Link LKLN> irq 10 on acpi0
pci_link9: <ACPI PCI Link LAUI> irq 11 on acpi0
pci_link10: <ACPI PCI Link LKMO> irq 0 on acpi0
pci_link11: <ACPI PCI Link LKSM> irq 0 on acpi0
pci_link12: <ACPI PCI Link LTID> irq 0 on acpi0
pci_link13: <ACPI PCI Link LTIE> irq 0 on acpi0
pci_link14: <ACPI PCI Link LATA> irq 14 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
device_attach: agp0 attach returned 6
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xff6fd000-0xff6fdfff irq 9 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xff6fe000-0xff6fefff irq 9 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <bridge> at device 5.0 (no driver attached)
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xc800-0xc80f,0xc400-0xc47f irq 10 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 7.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xff5dfc00-0xff5dfcff irq 11 at device 8.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:55:08:a8
pcm0: <Creative EMU10K1> port 0xb400-0xb41f irq 11 at device 9.0 on pci2
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
bktr0: <BrookTree 848A> mem 0xeeaff000-0xeeafffff irq 10 at device 10.0 on pci2
bktr0: [GIANT-LOCKED]
bktr0: Pinnacle/Miro TV, Philips SECAM tuner.
fwohci0: <VIA Fire II (VT6306)> port 0xb000-0xb07f mem 0xff5df000-0xff5df7ff irq 11 at device 11.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:86:69:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:86:69:12
fwe0: Ethernet address: 02:e0:18:86:69:12
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci2: <SiI 3114 SATA150 controller> port 0xac00-0xac07,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c0f mem 0xff5df800-0xff5dfbff irq 11 at device 12.0 on pci2
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
ata6: <ATA channel 2> on atapci2
ata7: <ATA channel 3> on atapci2
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xd17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 2, iclass 3/1
ums0: 6 buttons and Z dir.
uhid0: Microsoft\M-. Microsoft\M-. SideWinder\M-. Game Pad USB, rev 2.00/1.06, addr 3, iclass 3/0
Timecounter "TSC" frequency 2210766064 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (fire_saver, 0xffffffff802015f0, 0) error 19
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging disabled
ad0: 156334MB <Maxtor 6B160P0 BAH41B10> at ata0-master UDMA133
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-105S 0122/E1.22> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3520A/1.04> at ata1-slave UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-105F 1.22> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <_NEC DVD_RW ND-3520A 1.04> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 2 1 0 0 done
All buffers synced.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #0: Tue Sep 20 00:27:35 CEST 2005
    root at odie:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2210.77-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 536608768 (511 MB)
avail memory = 510119936 (486 MB)
netsmb_dev: loaded
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LUS0> irq 5 on acpi0
pci_link6: <ACPI PCI Link LUS1> irq 9 on acpi0
pci_link7: <ACPI PCI Link LUS2> irq 10 on acpi0
pci_link8: <ACPI PCI Link LKLN> irq 3 on acpi0
pci_link9: <ACPI PCI Link LAUI> irq 10 on acpi0
pci_link10: <ACPI PCI Link LKMO> irq 0 on acpi0
pci_link11: <ACPI PCI Link LKSM> irq 0 on acpi0
pci_link12: <ACPI PCI Link LTID> irq 0 on acpi0
pci_link13: <ACPI PCI Link LTIE> irq 0 on acpi0
pci_link14: <ACPI PCI Link LATA> irq 14 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xff6fd000-0xff6fdfff irq 5 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xff6fe000-0xff6fefff irq 9 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <bridge> at device 5.0 (no driver attached)
pcm0: <nVidia nForce3 250> port 0xe800-0xe8ff,0xe400-0xe47f mem 0xff6fb000-0xff6fbfff irq 10 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec>
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon If R250 9000> port 0xc800-0xc8ff mem 0xd8000000-0xdbffffff,0xff4f0000-0xff4fffff irq 11 at device 0.0 on pci1
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci_link0: BIOS IRQ 10 does not match initial IRQ 11
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 7.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xff5dfc00-0xff5dfcff irq 9 at device 8.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:55:08:a8
pcm1: <Creative EMU10K1> port 0xd400-0xd41f irq 9 at device 9.0 on pci2
pcm1: <SigmaTel STAC9708/11 AC97 Codec>
bktr0: <BrookTree 848A> mem 0xdeaff000-0xdeafffff irq 10 at device 10.0 on pci2
bktr0: [GIANT-LOCKED]
bktr0: Pinnacle/Miro TV, Philips SECAM tuner.
fwohci0: <VIA Fire II (VT6306)> port 0xd000-0xd07f mem 0xff5df000-0xff5df7ff irq 10 at device 11.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:86:69:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:86:69:12
fwe0: Ethernet address: 02:e0:18:86:69:12
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 2, iclass 3/1
ums0: 6 buttons and Z dir.
uhid0: Microsoft\M-. Microsoft\M-. SideWinder\M-. Game Pad USB, rev 2.00/1.06, addr 3, iclass 3/0
Timecounter "TSC" frequency 2210765983 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (fire_saver, 0xffffffff8021a6d0, 0) error 19
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging disabled
ad0: 156334MB <Maxtor 6B160P0 BAH41B10> at ata0-master UDMA133
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-105S 0122/E1.22> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3520A/1.04> at ata1-slave UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-105F 1.22> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <_NEC DVD_RW ND-3520A 1.04> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a
error: [drm:pid681:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
error: [drm:pid681:drm_unlock] *ERROR* Process 681 using kernel context 0
error: [drm:pid745:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
error: [drm:pid745:drm_unlock] *ERROR* Process 745 using kernel context 0
collecting pv entries -- suggest increasing PMAP_SHPGPERPROC
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 3 3 2 1 0 0 0 done
All buffers synced.
Uptime: 3m32s
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #0: Wed Sep 21 20:39:58 CEST 2005
    martymac at odie.martymac.com:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2210.77-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 536608768 (511 MB)
avail memory = 510291968 (486 MB)
netsmb_dev: loaded
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LUS0> irq 5 on acpi0
pci_link6: <ACPI PCI Link LUS1> irq 9 on acpi0
pci_link7: <ACPI PCI Link LUS2> irq 10 on acpi0
pci_link8: <ACPI PCI Link LKLN> irq 3 on acpi0
pci_link9: <ACPI PCI Link LAUI> irq 10 on acpi0
pci_link10: <ACPI PCI Link LKMO> irq 0 on acpi0
pci_link11: <ACPI PCI Link LKSM> irq 0 on acpi0
pci_link12: <ACPI PCI Link LTID> irq 0 on acpi0
pci_link13: <ACPI PCI Link LTIE> irq 0 on acpi0
pci_link14: <ACPI PCI Link LATA> irq 14 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
acpi_perf0: invalid _PSS package
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xe0000000-0xefffffff at device 0.0 on pci0
device_attach: agp0 attach returned 6
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xff6fd000-0xff6fdfff irq 5 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xff6fe000-0xff6fefff irq 9 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <bridge> at device 5.0 (no driver attached)
pcm0: <nVidia nForce3 250> port 0xe800-0xe8ff,0xe400-0xe47f mem 0xff6fb000-0xff6fbfff irq 10 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec>
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci_link0: BIOS IRQ 10 does not match initial IRQ 11
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 7.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xff5dfc00-0xff5dfcff irq 9 at device 8.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:55:08:a8
pcm1: <Creative EMU10K1> port 0xd400-0xd41f irq 9 at device 9.0 on pci2
pcm1: <SigmaTel STAC9708/11 AC97 Codec>
bktr0: <BrookTree 848A> mem 0xdeaff000-0xdeafffff irq 10 at device 10.0 on pci2
bktr0: [GIANT-LOCKED]
bktr0: Pinnacle/Miro TV, Philips SECAM tuner.
fwohci0: <VIA Fire II (VT6306)> port 0xd000-0xd07f mem 0xff5df000-0xff5df7ff irq 10 at device 11.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:86:69:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:86:69:12
fwe0: Ethernet address: 02:e0:18:86:69:12
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 2, iclass 3/1
ums0: 6 buttons and Z dir.
uhid0: Microsoft\M-. Microsoft\M-. SideWinder\M-. Game Pad USB, rev 2.00/1.06, addr 3, iclass 3/0
Timecounter "TSC" frequency 2210771542 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (fire_saver, 0xffffffff802015f0, 0) error 19
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging disabled
ad0: 156334MB <Maxtor 6B160P0 BAH41B10> at ata0-master UDMA133
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-105S 0122/E1.22> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3520A/1.04> at ata1-slave UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-105F 1.22> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <_NEC DVD_RW ND-3520A 1.04> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a

More information about the freebsd-amd64 mailing list