Glitch
Toll, Eric
etoll at vipstructures.com
Tue May 10 10:30:07 PDT 2005
I only have one processor listed, and no agp bus. Can anyone help?
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 07:00:26 UTC 2005
root at portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 242 (1595.03-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 1073152000 (1023 MB)
avail memory = 1024253952 (976 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
unknown: I/O range not supported
unknown: I/O range not supported
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.LPT_._CRS]
(Node 0xffffff0000a0ddc0), AE_AML_BUFFER_LIMIT
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.LPT_._CRS]
(Node 0xffffff0000a0ddc0), AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.LPC_.LPT_ - AE_AML_BUFFER_LIMIT
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xd0910000-0xd0910fff irq 19 at
device 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0911000-0xd0911fff irq 19 at
device 0.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
bge0: <Broadcom BCM5705 Gigabit Ethernet, ASIC rev. 0x3003> mem
0xd0900000-0xd090ffff irq 19 at device 5.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0f:ea:e7:b2:fe
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port
0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci8
pci9: <ACPI PCI bus> on pcib4
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0x2000-0x200f
mem 0xf0800000-0xf0ffffff irq 25 at device 1.0 on pc
i9
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
pci8: <base peripheral, interrupt controller> at device 3.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 4.0 on pci8
pci14: <ACPI PCI bus> on pcib5
pci8: <base peripheral, interrupt controller> at device 4.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: cannot reserve I/O port range
ppc0: cannot reserve I/O port range
orm0: <ISA Option ROMs> at iomem 0xc9000-0xc9fff,0xc0000-0xc8fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1595033384 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <FX4831T/R02C> at ata0-master PIO4
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 238474MB (488395120 sectors)
Mounting root from ufs:/dev/twed0s1a
More information about the freebsd-amd64
mailing list