amd64 irq assigning related problem

[Divacky Roman]

Hi,

my amd64 box with nforce3 chipset doesnt boot with acpi enabled. when I boot
with acpi disabled my atkbd (attached to ps/2) runs VERY slow (about 1cps), I
think its caused by atkbdc not having irq assigned...

with 5.3R it worked ok

I attach dmesg + vmstat -i:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #4: Mon Mar 14 10:03:31 UTC 2005
    root at sprava:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.81-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 268369920 (255 MB)
avail memory = 251703296 (240 MB)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0: <serial bus, USB> at device 2.1 (no driver attached)
pci0: <serial bus, USB> at device 2.2 (no driver attached)
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <GENERIC ATA controller> port 0xdc00-0xdc0f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 irq 15 at device 9.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pcib1: <PCI-PCI bridge> at device 11.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 14.0 on pci0
pci2: <PCI bus> on pcib2
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xb000-0xb0ff mem 0xfb000000-0xfb0000ff irq 11 at device 13.0 on pci2
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:11:09:d9:b6:61
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1808811462 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <ATAPI CDROM/V120N> at ata0-slave UDMA33
ad4: 76319MB <ST380013AS/3.18> [155061/16/63] at ata2-master UDMA33
Trying to mount root from ufs:/dev/ad4s2a
re0: link state changed to UP
stray irq7
re0: link state changed to DOWN
too many stray irq 7's: not logging anymore
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
vmstat -1:
interrupt                          total       rate
irq0: clk                        1413020        999
irq7:                                 11          0
stray irq7                            11          0
irq8: rtc                         180834        127
irq11: re0                         21483         15
irq14: ata0                           46          0
irq15: ata1 atapci1                35074         24
Total                            1650479       1167

hope this will help

roman