amd64/81089: FreeBSD 5.4 released version can not use Broadcom NIC 5704

[Hans Mathre]

The following reply was made to PR amd64/81089; it has been noted by GNATS.

From: Hans Mathre <hma3.gm at gmail.com>
To: bug-followup at FreeBSD.org, fishhong at nexcom.com.tw
Cc:  
Subject: Re: amd64/81089: FreeBSD 5.4 released version can not use Broadcom NIC 5704
Date: Tue, 5 Jul 2005 20:13:46 -0400

 I'm having the same troubles after updating a Dual AMD64 system to 5.4
 stable from 5.3. Looking at your patch, I'm seeing that there is a
 diffrence between the if_bge.c files, mine is...
 
 __FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.72.2.13 2005/05/22
 03:17:49 silby Exp $");
 
 where yours was...
 __FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.72.2.10.2.1
 2005/05/06 00:38:51 dwhite Exp $");
 
 So when I tried to apply the patch, I came up with this error...
 
 ../../../dev/bge/if_bge.c: In function `bge_ifmedia_upd':
 ../../../dev/bge/if_bge.c:3434: warning: 'sc' might be used uninitialized i=
 n thi
 s function
 *** Error code 1
 
 I'm at a loss for what to do, so any help would be great. Here is my dmesg.=
 ..
 
 Copyright (c) 1992-2005 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD 5.4-STABLE #0: Tue Jul  5 16:03:19 EDT 2005
     root at serverbdb.hogue-school:/usr/src/sys/amd64/compile/DUALAMD64_02
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: AMD Opteron(tm) Processor 248 (2191.06-MHz K8-class CPU)
   Origin =3D "AuthenticAMD"  Id =3D 0xf5a  Stepping =3D 10
   Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
 ,MCA,CM
 OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
   AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
 real memory  =3D 5368709120 (5120 MB)
 avail memory =3D 4116946944 (3926 MB)
 ACPI APIC Table: <A M I  OEMAPIC >
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 MADT: Forcing active-low polarity and level trigger for SCI
 ioapic0 <Version 1.1> irqs 0-23 on motherboard
 ioapic1 <Version 1.1> irqs 24-27 on motherboard
 ioapic2 <Version 1.1> irqs 28-31 on motherboard
 netsmb_dev: loaded
 acpi0: <A M I OEMRSDT> on motherboard
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
 cpu0: <ACPI CPU> on acpi0
 acpi_throttle0: <ACPI CPU Throttling> on cpu0
 cpu1: <ACPI CPU> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 pci3: <ACPI PCI bus> on pcib1
 pci0: <base peripheral, interrupt controller> at device 1.1 (no driver atta=
 ched)
 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xe400-0xe4ff mem 0xfe980000-0xfe=
 98fff
 f,0xfe990000-0xfe99ffff irq 29 at device 1.0 on pci2
 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem
 0xfe9e0000-0xfe9effff,0xfe9f0000-0xfe9fffff irq 30 at device 1.1 on
 pci2
 bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem
 0xfe9a0000-0xfe9affff,0xfe9b0000-0xfe9bffff irq 31 at device 3.0 on
 pci2
 miibus0: <MII bus> on bge0
 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
 1000baseTX-FDX, auto
 bge0: Ethernet address: 00:00:1a:19:08:b0
 bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem
 0xfe9c0000-0xfe9cffff,0xfe9d0000-0xfe9dffff irq 28 at device 3.1 on
 pci2
 miibus1: <MII bus> on bge1
 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
 brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
 1000baseTX-FDX, auto
 bge1: Ethernet address: 00:00:1a:19:08:b1
 pci0: <base peripheral, interrupt controller> at device 2.1 (no driver atta=
 ched)
 pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
 pci1: <ACPI PCI bus> on pcib3
 ohci0: <OHCI (generic) USB controller> mem 0xfe3fe000-0xfe3fefff irq
 19 at device 0.0 on pci1
 usb0: OHCI version 1.0, legacy support
 usb0: <OHCI (generic) USB controller> on ohci0
 usb0: USB revision 1.0
 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 ohci1: <OHCI (generic) USB controller> mem 0xfe3ff000-0xfe3fffff irq
 19 at device 0.1 on pci1
 usb1: OHCI version 1.0, legacy support
 usb1: <OHCI (generic) USB controller> on ohci1
 usb1: USB revision 1.0
 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 isab0: <PCI-ISA bridge> at device 7.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177=
 ,0x3f
 6,0x1f0-0x1f7 at device 7.1 on pci0
 ata0: channel #0 on atapci0
 ata1: channel #1 on atapci0
 pci0: <bridge> at device 7.3 (no driver attached)
 acpi_button0: <Power Button> on acpi0
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
 i0
 sio0: type 16550A, console
 orm0: <ISA Option ROM> at iomem 0xc8000-0xcbfff on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 Timecounters tick every 1.000 msec
 acd0: CDROM <SAMSUNG CD-ROM SN-124/S003> at ata1-slave PIO4
 Waiting 15 seconds for SCSI devices to settle
 ses0 at mpt1 bus 0 target 8 lun 0
 ses0: <SDR GEM318P 1> Fixed Processor SCSI-2 device
 ses0: 3.300MB/s transfers
 ses0: SAF-TE Compliant Device
 SMP: AP CPU #1 Launched!
 da0 at mpt1 bus 0 target 0 lun 0
 da0: <FUJITSU MAP3735NC 0108> Fixed Direct Access SCSI-3 device
 da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
 Queueing Enabled
 da0: 70103MB (143571316 512 byte sectors: 255H 63S/T 8936C)
 da1 at mpt1 bus 0 target 1 lun 0
 da1: <FUJITSU MAP3735NC 0108> Fixed Direct Access SCSI-3 device
 da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
 Queueing Enabled
 da1: 70103MB (143571316 512 byte sectors: 255H 63S/T 8936C)
 Mounting root from ufs:/dev/gvinum/root
 
 -hma3