twa breakage on AMD64with9.1.5.23wareversionand2005-01-1103:00:49
UTC RELENG_5 commit
Michael Meltzer
mjm at michaelmeltzer.com
Thu Jan 20 05:28:24 PST 2005
looks like patch3 worked, good job! I had to turn off TWA_DEBUG to get
the boot going, the debug was starving the boot on a 9600 baud terminal.
I can increase the speed and caputer the output on monday if it will
help(it on the large side, bigger than the 10,000 line capture buffer in
am using). I incude 2 iozone reports, the first one the new driver the
second one the old driver, Is thier a way to increase the "read ahead"
in freebsd?? -mjm
iozone -s 20480m -r 60 -i 0 -i 1 -t 1
Iozone: Performance Test of File I/O
Version $Revision: 3.196 $
Compiled for 64 bit mode.
Build: freebsd
Contributors:William Norcott, Don Capps, Isom Crawford, Kirby
Collins
Al Slater, Scott Rhine, Mike Wisner, Ken Goss
Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
Randy Dunlap, Mark Montague, Dan Million,
Jean-Marc Zucconi, Jeff Blomberg.
Run began: Thu Jan 20 07:45:52 2005
File size set to 20971520 KB
Record Size 60 KB
Command line used: iozone -s 20480m -r 60 -i 0 -i 1 -t 1
Output is in Kbytes/sec
Time Resolution = 0.000001 seconds.
Processor cache size set to 1024 Kbytes.
Processor cache line size set to 32 bytes.
File stride size set to 17 * record size.
Throughput test with 1 process
Each process writes a 20971520 Kbyte file in 60 Kbyte records
Children see throughput for 1 initial writers = 78219.47 KB/sec
Parent sees throughput for 1 initial writers = 78060.45 KB/sec
Min throughput per process = 78219.47 KB/sec
Max throughput per process = 78219.47 KB/sec
Avg throughput per process = 78219.47 KB/sec
Min xfer = 20971500.00 KB
Children see throughput for 1 rewriters = 19394.53 KB/sec
Parent sees throughput for 1 rewriters = 19394.32 KB/sec
Min throughput per process = 19394.53 KB/sec
Max throughput per process = 19394.53 KB/sec
Avg throughput per process = 19394.53 KB/sec
Min xfer = 20971500.00 KB
Children see throughput for 1 readers = 55960.09 KB/sec
Parent sees throughput for 1 readers = 55954.25 KB/sec
Min throughput per process = 55960.09 KB/sec
Max throughput per process = 55960.09 KB/sec
Avg throughput per process = 55960.09 KB/sec
Min xfer = 20971500.00 KB
Children see throughput for 1 re-readers = 55948.26 KB/sec
Parent sees throughput for 1 re-readers = 55946.60 KB/sec
Min throughput per process = 55948.26 KB/sec
Max throughput per process = 55948.26 KB/sec
Avg throughput per process = 55948.26 KB/sec
Min xfer = 20971500.00 KB
iozone test complete.
iozone -s 20480m -r 60 -i 0 -i 1 -t 1
Iozone: Performance Test of File I/O
Version $Revision: 3.196 $
Compiled for 64 bit mode.
Build: freebsd
Contributors:William Norcott, Don Capps, Isom Crawford, Kirby
Collins
Al Slater, Scott Rhine, Mike Wisner, Ken Goss
Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
Randy Dunlap, Mark Montague, Dan Million,
Jean-Marc Zucconi, Jeff Blomberg.
Run began: Mon Dec 20 21:03:36 2004
File size set to 20971520 KB
Record Size 60 KB
Command line used: iozone -s 20480m -r 60 -i 0 -i 1 -t 1
Output is in Kbytes/sec
Time Resolution = 0.000001 seconds.
Processor cache size set to 1024 Kbytes.
Processor cache line size set to 32 bytes.
File stride size set to 17 * record size.
Throughput test with 1 process
Each process writes a 20971520 Kbyte file in 60 Kbyte records
Children see throughput for 1 initial writers = 78738.67 KB/sec
Parent sees throughput for 1 initial writers = 78716.55 KB/sec
Min throughput per process = 78738.67 KB/sec
Max throughput per process = 78738.67 KB/sec
Avg throughput per process = 78738.67 KB/sec
Min xfer = 20971500.00 KB
Children see throughput for 1 rewriters = 32126.46 KB/sec
Parent sees throughput for 1 rewriters = 32125.77 KB/sec
Min throughput per process = 32126.46 KB/sec
Max throughput per process = 32126.46 KB/sec
Avg throughput per process = 32126.46 KB/sec
Min xfer = 20971500.00 KB
Children see throughput for 1 readers = 58563.70 KB/sec
Parent sees throughput for 1 readers = 58557.14 KB/sec
Min throughput per process = 58563.70 KB/sec
Max throughput per process = 58563.70 KB/sec
Avg throughput per process = 58563.70 KB/sec
Min xfer = 20971500.00 KB
Children see throughput for 1 re-readers = 58583.77 KB/sec
Parent sees throughput for 1 re-readers = 58581.98 KB/sec
Min throughput per process = 58583.77 KB/sec
Max throughput per process = 58583.77 KB/sec
Avg throughput per process = 58583.77 KB/sec
Min xfer = 20971500.00 KB
iozone test complete.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #21: Thu Jan 20 01:21:10 EST 2005
root at web7.thecenturiongroup.com:/usr/src/sys/amd64/compile/web7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 240 (1403.19-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf51 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 6442450944 (6144 MB)
avail memory = 5964316672 (5688 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port
0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xfd000000-0xfd00ffff irq 27 at device 3.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:50:45:5b:8e:76
bge1: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xfd010000-0xfd01ffff irq 27 at device 4.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:50:45:5b:8e:77
atapci1: <Promise PDC20319 SATA150 controller> port
0x3000-0x307f,0x30c0-0x30cf,0x3080-0x30bf mem
0xfd020000-0xfd03ffff,0xfd040000-0xfd040fff irq 25 at device 5.0 on pci2
atapci1: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
ata4: channel #2 on atapci1
ata5: channel #3 on atapci1
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
3ware device driver for 9000 series storage controllers, version:
2.50.02.011
twa0: <3ware 9000 series Storage Controller> port 0x4000-0x40ff mem
0xfd800000-0xfdffffff,0xfd100000-0xfd1000ff irq 30 at device 2.0 on pci3
twa0: [GIANT-LOCKED]
twa0: 4 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver
attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq
4 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <ISA Option ROMs> at iomem
0xcb000-0xcc7ff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled
acd0: DVDROM <IDE DVD-ROM 16X/VER 2.50> at ata0-master UDMA33
da0 at twa0 bus 0 target 0 lun 0
da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
da0: 100.000MB/s transfers
da0: 70550MB (144486400 512 byte sectors: 255H 63S/T 8993C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/da0s1b as swap device
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 3005287 free (1559 frags, 375466 blocks, 0.1%
fragmentation)
/dev/da0s1h: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1h: clean, 15168492 free (20 frags, 1896059 blocks, 0.0%
fragmentation)
/dev/da0s1g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1g: clean, 5010318 free (56766 frags, 619194 blocks, 0.9%
fragmentation)
/dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1f: clean, 6078377 free (553 frags, 759728 blocks, 0.0%
fragmentation)
Enabling ipfilter.
ioctl(SIOCIPFL6): Invalid argument
Setting hostname: web7.thecenturiongroup.com.
Installing NAT rules.
0 entries flushed from NAT table
0 entries flushed from NAT list
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 192.32.248.84 netmask 0xffffff00 broadcast 192.32.248.255
ether 00:50:45:5b:8e:76
media: Ethernet autoselect (none)
status: no carrier
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 10.200.0.7 netmask 0xffffff00 broadcast 10.200.0.255
ether 00:50:45:5b:8e:77
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
filter sync'd
add net default: gateway 10.200.0.1
Additional routing options: IP gateway=YES.
Starting devd.
Mounting NFS file systems:.
Starting syslogd.
Jan 20 01:24:35 web7 syslogd: kernel boot file is /boot/kernel/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib
/usr/local/lib
Starting usbd.
No USB host controllers found
Starting local daemons:.
Updating motd.
Starting ntpd.
Jan 20 01:24:35 web7 ntpd[393]: no IPv6 interfaces found
Configuring syscons: blanktime screensaver.
Starting sshd.
Initial amd64 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization:.
Additional TCP options:.
Starting moused:.
Starting inetd.
Starting background file system checks in 60 seconds.
Thu Jan 20 01:24:36 EST 2005
FreeBSD/amd64 (web7.thecenturiongroup.com) (ttyd0)
login: Jan 20 01:24:43 web7 ntpd[393]: sendto(139.88.35.33): No route to
host
Jan 20 01:24:44 web7 ntpd[393]: sendto(208.184.49.9): No route to host
Jan 20 01:24:45 web7 ntpd[393]: sendto(216.200.93.8): No route to host
FreeBSD/amd64 (web7.thecenturiongroup.com) (ttyd0)
login:
More information about the freebsd-amd64
mailing list