twa breakage on AMD64 with 9.1.5.23wareversionand2005-01-1103:00:49 UTC RELENG_5 commit

Jean-Yves Avenard jean-yves.avenard at hydrix.com
Thu Jan 20 03:18:23 PST 2005


Hello

Ok it went a little bit further with your new patch (ver3)

Now it displays:

twa_probe: entered
3ware device driver for 9000 series storage controllers, version 
2.50.02.011
twa0: <3ware 9000 series Storage Controller> port 0x8800-0x88ff mem 
0xfb800000-xfbffffff,0xfc5ffc00-0xfc5ffcff irq 29 at device 1.0 on pci1
unknown: twa_attach: entered.
twa0: [GIANT-LOCKED]
twa0: twa_setup: entered.
twa0: twa_setup_request_dmamap: entered.
twa0: twa_setup_request_dmamap: error = 0, segs[0].addr = 3d62e000, len 
= 40000

then it hangs.

I'm stil lwondering how you guys get the boot print in your email, I 
have to copy them by hand which takes forever

I tried the Control Alt Escape key combination (direct keyboard access, 
no console here) without any success.

Cheers
Jean-Yves


On 18/01/2005, at 10:15 PM, Jean-Yves Avenard wrote:

> Ok..
>
> I don't know how to get a file from what I see on the screen so I'll 
> copy it by hand:
>
> twa_probe: entered
> 3ware device driver for 9000 series storage controllers, version 
> 2.50.02.011
> twa0: <3ware 9000 series Storage Controller> port 0x9800-0x98ff mem 
> 0xfb800000-xfbffffff,0xfc6ffc00-0xfc6ffcff irq 29 at device 1.0 on 
> pci1
> unknown: twa_attach: entered.
> twa0: twa_setup: entered.
> twa0: twa_setup_request_dmamap: entered.
>
> From there it hangs nothing else will be displayed
>
> Now I type Control-Alt-Esc
> and it does.... absolutely nothing
>
> In my kernel config file I have:
> # My options
> options         COMPAT_43
> options         COMPAT_LINUX32
> options         LINPROCFS
>
> options         TWA_FLASH_FIRMWARE
> options         TWA_DEBUG=10
>
> options         KDB
> options         DDB
>
> Jean-Yves
>
> On 18/01/2005, at 7:08 AM, Vinod Kashyap wrote:
>
>>
>> One more thing.  When you enter the kernel debugger, please do a
>> 'call twa_report', and let me know what gets printed.
>>
>>
>>> -----Original Message-----
>>> From: Vinod Kashyap [mailto:vkashyap at amcc.com]
>>> Sent: Monday, January 17, 2005 12:04 PM
>>> To: Jean-Yves Avenard; Michael Meltzer
>>> Subject: RE: twa breakage on AMD64 with
>>> 9.1.5.23wareversionand2005-01-1103:00:49 UTC RELENG_5 commit
>>>
>>>
>>>
>>> Could you add 'options TWA_DEBUG=10' to the kernel config file?
>>> This will make the driver print a lot of debug messages, which
>>> might be helpful.
>>>
>>> Also, you might want to try adding 'options KDB' and 'options DDB'
>>> to the kernel config file, and if you experience a hang, press
>>> Ctrl+Alt+Esc to enter the debugger, and do a 'tr,20' which
>>> might indicate where the system is hanging.
>>>
>>>
>>>> -----Original Message-----
>>>> From: owner-freebsd-stable at freebsd.org
>>>> [mailto:owner-freebsd-stable at freebsd.org]On Behalf Of
>>>> Jean-Yves Avenard
>>>> Sent: Sunday, January 16, 2005 2:45 AM
>>>> To: Vinod Kashyap
>>>> Cc: freebsd stable
>>>> Subject: Re: twa breakage on AMD64 with
>>>> 9.1.5.23wareversionand2005-01-1103:00:49 UTC RELENG_5 commit
>>>>
>>>>
>>>> Hello
>>>>
>>>> On 15/01/2005, at 12:40 PM, Vinod Kashyap wrote:
>>>>
>>>>>
>>>>> Could you give the attached patch a try?  Just a hunch...
>>>>>
>>>>
>>>> I did... same behavior. it just hangs right after
>>> displaying the twa0
>>>> line.
>>>>
>>>> Actually, hangs is incorrect. As I had to drive to the office
>>>> to reload
>>>> a previous kernel (never, ever rely on nextboot my friends!)
>>>> When I got there I saw that it went a little bit further,
>>> so it seems
>>>> that it doesn't just hang... it is just very very slow
>>>>
>>>> Jean-Yves
>>>>
>>>> ---
>>>> Jean-Yves Avenard
>>>> Hydrix Pty Ltd - Embedding the net
>>>> www.hydrix.com | fax +61 3 9572 2686 | phone +61 3 9572 0686 ext 100
>>>> VoIP: direct: 100 at voip.hydrix.com, general: info at voip.hydrix.com
>>>>
>>>> _______________________________________________
>>>> freebsd-stable at freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>>>> To unsubscribe, send any mail to
>>>> "freebsd-stable-unsubscribe at freebsd.org"
>>>>
>>>
>>
>>
>>
> ---
> Jean-Yves Avenard
> Hydrix Pty Ltd - Embedding the net
> www.hydrix.com | fax +61 3 9572 2686 | phone +61 3 9572 0686 ext 100
> VoIP: direct: 100 at voip.hydrix.com, general: info at voip.hydrix.com
>
>
---
Jean-Yves Avenard
Hydrix Pty Ltd - Embedding the net
www.hydrix.com | fax +61 3 9572 2686 | phone +61 3 9572 0686 ext 100
VoIP: direct: 100 at voip.hydrix.com, general: info at voip.hydrix.com



More information about the freebsd-amd64 mailing list