twa breakage on AMD64 with 9.1.5.23wareversionand2005-01-1103:00:49 UTC RELENG_5 commit

Tue Jan 18 20:03:40 PST 2005

straight boot, no patches or extra debug.

-mjm

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #14: Thu Jan 13 23:55:20 EST 2005
    root at web7.thecenturiongroup.com:/usr/src/sys/amd64/compile/web7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 240 (1403.19-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf51  Stepping = 1

Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 6442450944 (6144 MB)
avail memory = 5963796480 (5687 MB)
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD    XSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 
0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 
0xfd000000-0xfd00ffff irq 27 at device 3.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: Ethernet address: 00:50:45:5b:8e:76
bge1: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 
0xfd010000-0xfd01ffff irq 27 at device 4.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge1: Ethernet address: 00:50:45:5b:8e:77
atapci1: <Promise PDC20319 SATA150 controller> port 
0x3000-0x307f,0x30c0-0x30cf,0x3080-0x30bf mem 
0xfd020000-0xfd03ffff,0xfd040000-0xfd040fff irq 25 at device 5.0 on pci2
atapci1: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
ata4: channel #2 on atapci1
ata5: channel #3 on atapci1
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver 
attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
3ware device driver for 9000 series storage controllers, version: 
2.50.02.011
twa0: <3ware 9000 series Storage Controller> port 0x4000-0x40ff mem 
0xfd800000-0xfdffffff,0xfd100000-0xfd1000ff irq 30 at device 2.0 on pci3
twa0: 4 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
twa0: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver 
attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 
4 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <ISA Option ROMs> at iomem 
0xcb000-0xcc7ff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = disabled
acd0: DVDROM <IDE DVD-ROM 16X/VER 2.50> at ata0-master UDMA33
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:/dev/da0a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot>
Vinod Kashyap wrote:

>I tried reproducing the problem on both i386 and amd64,
>but could not.  I installed 5.3 RELEASE, cvsuped to the
>tip of RELENG_5, re-built the kernel with twa integrated,
>and rebooted.  The test systems booted just fine (off of
>3ware controlled da0).  I even tried replacing just the
>twa sources of 5.3 RELEASE with the twa sources from the
>tip of RELENG_5, and that worked fine too.  All this,
>without even upgrading the firmware from 2.02.00.008 (which
>is bundled into 5.3 RELEASE sources).  So, I am confused as
>to what might be happening.
>
>Could you give the attached patch a try?  Just a hunch...
>
>
>
>  
>
>>-----Original Message-----
>>From: owner-freebsd-stable at freebsd.org
>>[mailto:owner-freebsd-stable at freebsd.org]On Behalf Of Michael Meltzer
>>Sent: Friday, January 14, 2005 6:03 AM
>>To: Vinod Kashyap
>>Cc: freebsd stable
>>Subject: Re: twa breakage on AMD64 with 9.1.5.2
>>3wareversionand2005-01-1103:00:49 UTC RELENG_5 commit
>>
>>
>>
>>    
>>
>>>Could you see if the driver is getting loaded?  The driver prints
>>>the message: "3ware device driver for 9000 series storage 
>>>      
>>>
>>controllers...".
>>    
>>
>>>Did the new firmware get flashed?  You can download the firmware
>>>      
>>>
>>>from the 3ware website and flash it on the card using a DOS floppy.
>>    
>>
>>>Alternatively, you can add 'options TWA_FLASH_FIRMWARE' to your
>>>kernel configuration file and rebuild the kernel.  This should build
>>>the kernel/driver with the firmware bundled, and the firmware should
>>>automatically get downloaded the next time you reboot.
>>>
>>>
>>>
>>>
>>> 
>>>
>>>      
>>>
>>I reloaded the new driver and rebuilt the kernel last night with the 
>>TWA_FLASH_FIRMWARE, Did not see the -D on the command line for the 
>>rebuild, the new firmware was not requested to load. I got the new 
>>firmware from 3ware and flashed it in, Still does not work. I 
>>also build 
>>a straight GENERIC Kernel, still no luck. Their is no error 
>>message that 
>>I saw and the versions number for the pieces did change so it 
>>the "new" 
>>stuff. I need to setup a serial console to capture the full messages, 
>>should have that on monday night. Thank You -mjm
>>
>>
>>_______________________________________________
>>freebsd-stable at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>>To unsubscribe, send any mail to 
>>"freebsd-stable-unsubscribe at freebsd.org"
>>    
>>
>
>  
>