twa breakage on AMD64 with 9.1.5.23wareversionand2005-01-1103:00:49 UTC RELENG_5 commit

Sat Jan 15 09:22:01 PST 2005

You seem to running twa version 2.50.00.000.  This is the
driver prior to the recent update.  Do you see the hang
even with this?  The latest version is 2.50.02.011.

> -----Original Message-----
> From: Jean-Yves Avenard [mailto:jean-yves.avenard at hydrix.com]
> Sent: Saturday, January 15, 2005 12:19 AM
> To: Vinod Kashyap
> Cc: freebsd-amd64 at FreeBSD.ORG; freebsd stable; Michael Meltzer
> Subject: Re: twa breakage on AMD64 with 9.1.5.2
> 3wareversionand2005-01-1103:00:49 UTC RELENG_5 commit
> 
> 
> Hello
> 
> On 15/01/2005, at 12:40 PM, Vinod Kashyap wrote:
> 
> >
> > I tried reproducing the problem on both i386 and amd64,
> > but could not.  I installed 5.3 RELEASE, cvsuped to the
> > tip of RELENG_5, re-built the kernel with twa integrated,
> > and rebooted.  The test systems booted just fine (off of
> > 3ware controlled da0).  I even tried replacing just the
> > twa sources of 5.3 RELEASE with the twa sources from the
> > tip of RELENG_5, and that worked fine too.  All this,
> > without even upgrading the firmware from 2.02.00.008 (which
> > is bundled into 5.3 RELEASE sources).  So, I am confused as
> > to what might be happening.
> >
> > Could you give the attached patch a try?  Just a hunch...
> >
> 
> Here is what the screen look like:
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 
> 1993, 1994
> 	The Regents of the University of California. All rights 
> reserved.
> FreeBSD 5.3-STABLE #2: Sun Nov 28 13:39:08 EST 2004
>      avenardj at server3.private.hydrix.com:/usr/obj/usr/src/sys/AMD64
> ACPI APIC Table: <A M I  OEMAPIC >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Opteron(tm) Processor 248 (2190.63-MHz K8-class CPU)
>    Origin = "AuthenticAMD"  Id = 0xf5a  Stepping = 10
>  
> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP
> ,MTRR,PGE,
> MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>    AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
> real memory  = 1073676288 (1023 MB)
> avail memory = 1025294336 (977 MB)
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> ioapic1 <Version 1.1> irqs 24-27 on motherboard
> ioapic2 <Version 1.1> irqs 28-31 on motherboard
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci3: <ACPI PCI bus> on pcib1
> ohci0: <OHCI (generic) USB controller> mem 
> 0xfeafc000-0xfeafcfff irq 19
> at device 0.0 on pci3
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 
> 0xfeafd000-0xfeafdfff irq 19
> at device 0.1 on pci3
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> pci3: <display, VGA> at device 6.0 (no driver attached)
> fxp0: <Intel 82551 Pro/100 Ethernet> port 0xbc00-0xbc3f mem
> 0xfeaa0000-0xfeabffff,0xfeafb000-0xfeafbfff irq 18 at device 8.0 on
> pci3
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:e0:81:29:c0:30
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <AMD 8111 UDMA133 controller> port
> 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 
> 7.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0xac00-0xacff,0xa000-0xa0ff mem 0xfc8fc000-0xfc8fdfff irq 24 at device
> 6.0 on pci2
> ahd0: [GIANT-LOCKED]
> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
> ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0xa400-0xa4ff,0xa800-0xa8ff mem 0xfc8fe000-0xfc8fffff irq 25 at device
> 6.1 on pci2
> ahd1: [GIANT-LOCKED]
> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
> bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem
> 0xfc8a0000-0xfc8affff,0xfc8b0000-0xfc8bffff irq 24 at device 9.0 on
> pci2
> miibus1: <MII bus> on bge0
> brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus1
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:e0:81:29:c0:b0
> bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem
> 0xfc8d0000-0xfc8dffff,0xfc8e0000-0xfc8effff irq 25 at device 9.1 on
> pci2
> miibus2: <MII bus> on bge1
> brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus2
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge1: Ethernet address: 00:e0:81:29:c0:b1
> pci0: <base peripheral, interrupt controller> at device 10.1 
> (no driver
> attached)
> pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pci1: <ACPI PCI bus> on pcib3
> 3ware device driver for 9000 series storage controllers, version:
> 2.50.00.000
> twa0: <3ware 9000 series Storage Controller> port 0x9800-0x98ff mem
> 0xfb800000-0xfbffffff,0xfc6ffc00-0xfc6ffcff irq 29 at device 1.0 on
> pci1
> 
> 
>  From there it just hangs...
> The drive activity LED will be lit for about 10s and after that goes
> off.
> 
> The more it goes, the more I'm thinking of reverting to i386 mode, the
> amd64 just keeps crashing about once a fortnight.
> 
> Jean-Yves
> 
> 
> ---
> Jean-Yves Avenard
> Hydrix Pty Ltd - Embedding the net
> www.hydrix.com | fax +61 3 9572 2686 | phone +61 3 9572 0686 ext 100
> VoIP: direct: 100 at voip.hydrix.com, general: info at voip.hydrix.com
> 
> 