www/86888: new motherboard for the amd64

[JoaoBR]

On Tuesday 20 December 2005 07:44, spil oss wrote:
> João,
>
> As for the sk, I think you're running into a different problem which
> I'm told has something to do with Interrupt-routing. For my ancient
> 3com 3c575 the workaround was to use polling on the card (although I'm
> hoping for a fix as polling takes too much resource on that ancient
> laptop). This does require a kernel with polling support.
> See http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/87114
> Maybe it helps someone here if you list the specific model/version of
> the NIC that uses this SysKonnect driver.
>
> Have you tried booting with acpi disabled?
>

The Asus A8V does not boot with acpi disabled and polling did not made any 
difference and I believe sk do not support polling

The IF is onboard and probed as:

skc0: <Marvell Gigabit Ethernet> port 0xb400-0xb4ff mem 0xfa500000-0xfa503fff 
irq 17 at device 10.0 on pci0
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0


thanks, João





> Spil.
>
> On 12/20/05, JoaoBR <joao at matik.com.br> wrote:
> > On Tuesday 20 December 2005 06:32, spil oss wrote:
> > > After installing 6-RELEASE using
> > > ftp://ftp.nl.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/6.0/6.0-R
> > >ELEA SE-i386-disc1.iso nve is giving me the device timeouts (as I
> > > expected) http://www.nl.freebsd.org/platforms/amd64/motherboards.html
> > > reports nve being fine in 6-BETA5 though.
> > >
> > > After timeout (64) the network was gone.
> >
> > I have similar problems with R-6 amd64 but with sk and fxp driver
> >
> > without any reason I get such events
> >
> > sk0: link state changed to UP
> > sk0: watchdog timeout
> > sk0: link state changed to DOWN
> >
> > and
> >
> > fxp0: DMA timeout
> > fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> > fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >
> > for sure the HUB is Ok and no other physical problem
> > the sk error ocurres normally in idle hours and the fxp anytime
> >
> > when the sk event happens the traffic goes still through
> >
> > when the fxp error appears traffic stops on that interface and the IF
> > status change to
> > status: active
> > media Ethernet autoselect (none)
> >
> > the xl I have installed do not give any problem at all
> >
> > this is an ASUS A8V with amd64 processor, I thought this could be an acpi
> > problem because the dsdt is giving lots of errors when compiling it,
> > indeed it does not compile at all.
> >
> > I do not have this problems with the same HW and 5.4-R
> >
> > João
> >
> >
> >
> >
> >
> >
> >
> > A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada
> > segura. Service fornecido pelo Datacenter Matik 
> > https://datacenter.matik.com.br
> > _______________________________________________
> > freebsd-amd64 at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
> > To unsubscribe, send any mail to "freebsd-amd64-unsubscribe at freebsd.org"
>
> A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada
> segura. Service fornecido pelo Datacenter Matik 
> https://datacenter.matik.com.br

-- 

Atenciosamente

Infomatik Internet Technology
(18)3551.8155  (18)8112.7007
http://info.matik.com.br







A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik  https://datacenter.matik.com.br