supermicro X6DHP-8G2

[Gary Mu1der]

Scott,

I just determined that aaccli is not supported under amd64 for aac based 
h/w RAID (specifically my Adaptec 2200S RAID controller).

Any idea if or how much work will be required for aaccli to be supported 
under amd64?

Thanks,
Gary

Scott Long wrote:
> Marc Lambrichs wrote:
> 
>> I want to use raid5 on my supermicro 6014P-82R with a X6DHP-8G2 
>> motherboard. So we had to let go of our Adaptec 2010S ZCR card, 
>> because it's not supported. What would you recommend to use instead?
>>
>> Cheers,
>> marc
>>
> 
> The 2010S is special since it uses the non-64-bit-clean ASR driver.
> Other Adaptec cards like the 2200 use the AAC driver which is
> 64-bit clean and is known to work on amd64.  The LSI MegaRAID
> line of cards uses the AMR driver which is also 64-bit clean and
> known to work.  Those are your only two choices for SCSI RAID.
> One thing to watch out for is that Intel rebrands ZCR cards from
> both ICP/Vortex and LSI.  The driver for the former, IIR, is not
> 64-bit clean.
> 
> Scott
> _______________________________________________
> freebsd-amd64 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
> To unsubscribe, send any mail to "freebsd-amd64-unsubscribe at freebsd.org"
>