Just following up re: my initial install of FreeBSD on my new
AMD64 box
Conrad J. Sabatier
conrads at cox.net
Fri Jun 11 21:13:41 GMT 2004
On 11-Jun-2004 Conrad J. Sabatier wrote:
>
> It's an HP Pavilion a530n (nice!). Rather than clutter up the list,
> all the specs can be found here:
>
> http://h10025.www1.hp.com/ewfrf/wc/prodinfoCategory?product=404646&lan
> g=en&cc=us&lc=en&dlc=en&
>
> I'll send a verbose dmesg.boot later. My existing one is not in
> verbose mode, and I'm in the middle of doing a few things and can't
> reboot just at the moment. :-)
OK, I just cvsupped and made a new world/kernel. I've attached the
latest dmesg.boot. Of course, this is with acpi disabled, as I can't
get anywhere otherwise. :-)
Thanks!
--
Conrad J. Sabatier <conrads at cox.net> -- "In Unix veritas"
-------------- next part --------------
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 16 16
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Fri Jun 11 15:17:00 CDT 2004
conrads at ip68-11-70-23.no.no.cox.net:/usr/obj/usr/src/sys/CUSTOM
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80608000.
Calibrating clock(s) ... i8254 clock: 1193201 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1995008356 Hz
CPU: AMD Athlon(tm) 64 Processor 3200+ (1995.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 536608768 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000068e000 - 0x000000001f089fff, 513785856 bytes (125436 pages)
avail memory = 509890560 (486 MB)
null: <null device, zero device>
mem: <memory & I/O>
random: <entropy source, Software, Yarrow>
pci_open(1): mode 1 addr port (0x0cf8) is 0x80015004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00d110de)
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x10de, dev=0x00d1, revid=0xa4
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00d0, revid=0xf6
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00005000, size 6, enabled
map[24]: type 4, range 32, base 00005040, size 6, enabled
found-> vendor=0x10de, dev=0x00d4, revid=0xa4
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base febfb000, size 12, enabled
found-> vendor=0x10de, dev=0x00d7, revid=0xa5
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base febfc000, size 12, enabled
found-> vendor=0x10de, dev=0x00d7, revid=0xa5
bus=0, slot=2, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base febfdc00, size 8, enabled
found-> vendor=0x10de, dev=0x00d8, revid=0xa2
bus=0, slot=2, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base febfe000, size 12, memory disabled
map[14]: type 4, range 32, base 0000eff0, size 3, enabled
found-> vendor=0x10de, dev=0x00d6, revid=0xa5
bus=0, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 4, range 32, base 0000ec00, size 7, enabled
map[18]: type 1, range 32, base febff000, size 12, enabled
found-> vendor=0x10de, dev=0x00da, revid=0xa2
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x10de, dev=0x00d5, revid=0xa5
bus=0, slot=8, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10de, dev=0x00dd, revid=0xa2
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00d2, revid=0xa4
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce3 USB Controller> mem 0xfebfb000-0xfebfbfff irq 5 at device
2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfb000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <nVidia nForce3 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: Alcor Micro USB Reader, rev 1.10/1.00, addr 2
umass0:0:0:-1: Attached to scbus0
ohci1: <nVidia nForce3 USB Controller> mem 0xfebfc000-0xfebfcfff irq 10 at devic
e 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfc000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <nVidia nForce3 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <network, ethernet> at device 5.0 (no driver attached)
pcm0: <Nvidia nForce3> port 0xec00-0xec7f,0xe800-0xe8ff mem 0xfebff000-0xfebffff
f irq 10 at device 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0xec00
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec (id = 0x414c4720)>
pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Ste
reo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserv
ed 1, center DAC, surround DAC, LFE DAC, reserved 4
pcm0: sndbuf_setmap 7e1000, 4000; 0xffffffff94eae000 -> 7e1000
pcm0: sndbuf_setmap 808000, 4000; 0xffffffff94eb2000 -> 808000
atapci0: <nVidia nForce3 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x17
7,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcib1: <PCI-PCI bridge> at device 10.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfe600000-0xfeafffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib1
pci2: physical bus=2
map[10]: type 1, range 32, base feafe000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xfeafe000-0xfeafefff
map[14]: type 4, range 32, base 0000df00, size 6, enabled
pcib1: device (null) requested decoded I/O range 0xdf00-0xdf3f
map[18]: type 1, range 32, base fe900000, size 20, enabled
pcib1: device (null) requested decoded memory range 0xfe900000-0xfe9fffff
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=2, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base feaff400, size 8, enabled
pcib1: device (null) requested decoded memory range 0xfeaff400-0xfeaff4ff
map[14]: type 4, range 32, base 0000dff0, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xdff0-0xdff7
map[18]: type 4, range 32, base 0000d800, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xd800-0xd8ff
found-> vendor=0x11c1, dev=0x048c, revid=0x03
bus=2, slot=5, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=255
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base feaff800, size 11, enabled
pcib1: device (null) requested decoded memory range 0xfeaff800-0xfeafffff
map[14]: type 1, range 32, base feaf8000, size 14, enabled
pcib1: device (null) requested decoded memory range 0xfeaf8000-0xfeafbfff
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=2, slot=9, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfe900000-0xfe9ffff
f,0xfeafe000-0xfeafefff irq 10 at device 4.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafe000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:90:27:65:67:c9
fxp0: [GIANT-LOCKED]
pci2: <simple comms> at device 5.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfeaf8000-0xfeafbfff,0xfeaff800-0x
feafffff irq 5 at device 9.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfeaff800
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:6c:10:be
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
pcib2: <PCI-PCI bridge> at device 11.0 on pci0
pcib2: secondary bus 1
pcib2: subordinate bus 1
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfc500000-0xfe5fffff
pcib2: prefetched decode 0xdc400000-0xec3fffff
pci1: <PCI bus> on pcib2
pci1: physical bus=1
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib2: device (null) requested decoded memory range 0xfd000000-0xfdffffff
map[14]: type 3, range 32, base e0000000, size 27, enabled
pcib2: device (null) requested decoded memory range 0xe0000000-0xe7ffffff
found-> vendor=0x10de, dev=0x0322, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cpu0 on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xcf800-0xd07ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 1995008356 Hz quality 800
Timecounters tick every 0.976 msec
lo0: bpf attached
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
007db000 OUTL ST2 ALL ALL 12 00000000 007db080 8411:0006 RUN,ACTIVE, ack comp
lete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on nVidia nForce3 chip
ata0-master: setting UDMA100 on nVidia nForce3 chip
ad0: <ST3200822A/3.01> ATA-6 disk at ata0-master
ad0: 190782MB (390721968 sectors), 387621 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on nVidia nForce3 chip
ata1-slave: setting PIO4 on nVidia nForce3 chip
[0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/80/63 s:0 l:390721968
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 0 length 200049647616 end 200049647615
GEOM: Configure ad0a, start 0 length 268435456 end 268435455
GEOM: Configure ad0b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad0c, start 0 length 200049647616 end 200049647615
GEOM: Configure ad0d, start 1342177280 length 2147483648 end 3489660927
GEOM: Configure ad0e, start 3489660928 length 4294967296 end 7784628223
GEOM: Configure ad0f, start 7784628224 length 192265019392 end 200049647615
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad0s1c, start 0 length 200049647616 end 200049647615
GEOM: Configure ad0s1d, start 1342177280 length 2147483648 end 3489660927
GEOM: Configure ad0s1e, start 3489660928 length 4294967296 end 7784628223
GEOM: Configure ad0s1f, start 7784628224 length 192265019392 end 200049647615
acd0: <HP DVD Writer 400/Bh04> CDRW drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 4134KB/s (4134KB/s), 8192KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 2 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm audio disc
acd1: <ASUS CD-S480/AH/0.87> CDROM drive at ata1 as slave
acd1: read 8250KB/s (8250KB/s), 128KB buffer, PIO4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes:
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
pcm0: measured ac97 link rate at 48006 Hz, will use 48000 Hz
bus_explore done
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 6
(probe3:ata1:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
pass0: 1.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
pass1: 1.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
pass2: 1.000MB/s transfers
pass3 at umass-sim0 bus 0 target 0 lun 3
pass3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
pass3: 1.000MB/s transfers
pass4 at ata1 bus 0 target 0 lun 0
pass4: <HP DVD Writer 400c Bh04> Removable CD-ROM SCSI-0 device
pass4: 16.000MB/s transfers
pass5 at ata1 bus 0 target 1 lun 0
pass5: <ASUS CD-S480/AH 0.87> Removable CD-ROM SCSI-0 device
pass5: 16.000MB/s transfers
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
pass0: 1.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
pass1: 1.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
pass2: 1.000MB/s transfers
pass3 at umass-sim0 bus 0 target 0 lun 3
pass3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
pass3: 1.000MB/s transfers
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HP DVD Writer 400c Bh04> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [212290 x 2048 byte records]
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
cd1 at ata1 bus 0 target 1 lun 0
cd1: <ASUS CD-S480/AH 0.87> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
GEOM: new disk cd0
GEOM: new disk cd1
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
Unretryable error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
Unretryable error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
Unretryable error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
Unretryable error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
More information about the freebsd-amd64
mailing list