sk0 problems on an Asus K8VSE Delux

[Lawrence Farr]

Hi Bjoern,

I've tried with 5.2.1, and CURRENT as of today with the same result.
An FXP has no issues in the same machine. DHCP works, but takes a 
long time.

Lawrence Farr
EPC Direct Limited  

> -----Original Message-----
> From: Bjoern A. Zeeb [mailto:bzeeb-lists at lists.zabbadoz.net] 
> Sent: 01 July 2004 19:18
> To: Lawrence Farr
> Cc: freebsd-amd64 at FreeBSD.org
> Subject: Re: sk0 problems on an Asus K8VSE Delux
> 
> On Thu, 1 Jul 2004, Lawrence Farr wrote:
> 
> > I have problems with my sk0 on an Asus K8V SE Deluxe board:
> >
> > It's built in to the board.
> > Running 5.2.1, or CURRENT from today, the interface stops if you
> > use CVSUP or NFS after a few seconds. If you ifconfig down it a
> > few times, then bring it back up, it will be working again for a
> > few seconds.
> ...
> > Anyone got any ideas where to start looking? ACPI and APIC enabled
> > or disabled makes no difference. I've also put the newest BIOS
> > available on. Switch on the other end is a Summit Extreme 48.
> 
> try getting a current onto the machine - this will improve the
> situation that sk will not lose connectivity; there are still some
> issues:
> 
> - a LOR caused by locking in attach routine.
> 
> - DHCP doesn't work on startup here; the sk takes to long to come
>   up; actually the machine ist up; I can login with a keyboard and
>   about at this point the sk comes up; this might be an issue with
>   the locking in the attach case; I think someone started to work
>   on this but I cannot remember who and if he finished.
> 
> HTH
> 
> -- 
> Bjoern A. Zeeb				bzeeb at 
> Zabbadoz dot NeT
>