ATA driver cannot detect the Serial ATA disk in
FreeBSD/AMD64-Current
SungGON Yi.
skon at kr.FreeBSD.org
Thu Apr 1 05:10:45 PST 2004
My system is consisted in Tyan S2885 opteron dual board and Seagate 7200.1 SATA
disk with
FreeBSD/AMD64 5.2-Current.
Old ata driver could detect the disk. Below the verbose message on bootstrap:
----------------------
...
atapci0: <SiI 3114 SATA150 controller> port 0x8400-0x840f,0x8480-0x8483,0x8800-0
x8807,0x8880-0x8883,0x8c00-0x8c07 mem 0xfe8ffc00-0xfe8fffff irq 17 at device 11.
0 on pci3
pcib1: device atapci0 requested decoded I/O range 0x8400-0x840f
atapci0: [MPSAFE]
pcib1: device atapci0 requested decoded memory range 0xfe8ffc00-0xfe8fffff
ata2: reset tp1 mask=01 ostat0=50 ostat1=50
ata2-master: stat=0xff err=0xff lsb=0xff msb=0xff
ata2-master: stat=0xff err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: at 0xfe8ffc00 on atapci0
...
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on AMD 8111 chip
acd0: <CRD-8400B/1.02> CDROM drive at ata1 as master
acd0: read 6875KB/s (6875KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad4: <ST380013AS/3.18> ATA-6 disk at ata2-master
ad4: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad4
...
--------------
But, new ata driver cannot detect the disk.
---------------
...
atapci0: <SiI 3114 SATA150 controller> port 0x8400-0x840f,0x8480-0x8483,0x8800-0
x8807,0x8880-0x8883,0x8c00-0x8c07 mem 0xfe8ffc00-0xfe8fffff irq 17 at device 11.
0 on pci3
pcib1: device atapci0 requested decoded I/O range 0x8400-0x840f
atapci0: [MPSAFE]
pcib1: device atapci0 requested decoded memory range 0xfe8ffc00-0xfe8fffff
ata2: at 0xfe8ffc00 on atapci0
ata2: [MPSAFE]
ata3: reset tp1 mask=01 ostat0=7f ostat1=7f
ata3-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
...
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on AMD 8111 chip
acd0: <CRD-8400B/1.02> CDROM drive at ata1 as master
acd0: read 6875KB/s (6875KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
...
------------
Therefore, My system cannot be bootstrapped new ata driver. (root in ad4s1a)
Anyone help me.
SungGON Yi.
skon at kr.FreeBSD.org
More information about the freebsd-amd64
mailing list