alpha/127248: System crashes when many (7) serial port
terminals (vt320-vt510) connected to the server via com to
usb adapter and 2-usb hubs.
Dieter
freebsd at sopwith.solgatos.com
Sat Oct 4 21:30:56 UTC 2008
> > Surely a "good" USB to RS-232 bridge (if one exists?) or a RS-232
> > filter/isolator (assuming they exist?) would be *far* less expensive
> > than the server class alpha you suggest below.
>
> It depend on how much RS232 you need and how many slots the OP has free.
> Nevertheless a "good" RS232 bridge if needed in number are not cheap
> either - ntoe that you can get affordable PCI extenders as well.
The PCI expanders I've seen cost almost as much as getting an entire
additional machine.
> > > > The problem with PCI is the limited number of slots. :-(
> > >
> > > Well - not realy with server class alphas...
> >
> > In my world, a "server" means 1-4 full height 19" racks with quite large
> > price tags and power&cooling requirements. Some people think a server
> > is a pee-cee. So I'm not sure what you mean by "server class alphas".
>
> Server doesn't mean rack, but beside from a few OEM boards and small
> 19" system all alphas have lots of free slots available.
>
> > I have what I would call a "workstation" class alpha, which cost an
> > obscene amount to get 6 PCI slots instead of 4, and at times they are
> > all full. So I can't use up a slot just to get a couple more RS-232
> > ports. How many PCI slots does a server class alpha have?
>
> Well the AS4100 I have already has 8 slots which is not that uncommon
> for alpha servers.
I'd call an alpha with only 8 slots a workstation class machine. It
wouldn't take much to fill up 8 slots.
> The real big ones can even have a few hundred slots.
A few hundred slots would be server class. And I'm sure a price tag to
match, along with floor space, power, and cooling requirements.
> > USB to RS-232 bridge could be a good solution, if I knew which
> > make&model of bridge worked well with *BSD. Poking around on the web
> > I can't even find what chip they have inside.
>
> Really forget about USB to RS232.
> It is not the chip which is the problem it is the principal.
> You really need galvanic isolation, because USB can't handle ground
> loops, which no cheap device has.
> You can use any kind of chip with propper isolation, but then it
> is likely more expensive than any other kind of solution.
I assume this is marketing driven. Adding a few optos can't
increase the manufacturing cost *that* much. Sounds like a
market opportunity for someone.
> > Do these bridges actually work properly, or do they have gotchas
> > like the USB to SATA/PATA bridges?
>
> The prolific bridges work well enough if you don't have a ground
> loop and FTDI chips are better IMHO.
Thanks.
More information about the freebsd-alpha
mailing list