(no subject)

[Richard J. Valenta]

I am no expert... but I believe you may need to tell it to boot from the
CD.  Someone more familiar will have to explain if they agree.

I think I initially figured it out via 'help'... but I also had a
manual.. wish I knew where it was now.



Richard J. Valenta 
Note:  The information contained in this e-mail message, including any
attachments, is legally privileged and confidential.  If you are not the
intended recipient, you are hereby notified that any reading, use or
dissemination of this message is strictly prohibited.  If you have
received this message in error, please immediately, notify us by
telephone and delete this message from your system.
--This message is NOT or NOLONGER ENCRYPTED 


-----Original Message-----
From: owner-freebsd-alpha at freebsd.org
[mailto:owner-freebsd-alpha at freebsd.org] On Behalf Of dezwarte
Sent: Monday, June 12, 2006 3:26 PM
To: freebsd-alpha at freebsd.org
Subject: (no subject)

Dear,

 

I have buy last a alphaserver800 5/400 so I like to learn freebsd and
how
it works. 

But it is all new for me so I want to instaal it on my new machine.

Is there enyody who can give me some examples "how to install" it on a
alphaserver800

 

 I have try the bootonly cd and this iis all what I can get.....;-((

(boot dka300.3.0.5.0 -flags 0

Block 0 of dka300.3.0.5.0 is a valid boot block Reading 407 blocks from
dka300.3.0.5.0 Bootstrap code read in Building FRU tableFRU tablesize
=0xd7b
Base =1d6000 image_start =0, image_bytes =32e00 Initializing HWRPB 2000
Initializing page table at ffce000 Initializing machine state Setting
affinity to the primary CPU jumping to bootstrap code

 

After this my machine stops and reboot automaticly after a few





Thanks

erwin

_______________________________________________
freebsd-alpha at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-alpha
To unsubscribe, send any mail to "freebsd-alpha-unsubscribe at freebsd.org"