5.4b1 on Miata

[JoséM.Fandiño]

Bernd Walter wrote:
> 
> On Fri, Mar 25, 2005 at 06:23:46PM +0100, José M. Fandiño wrote:
> > Hello,
> >
> >  It was impossible to me to do work a miata workstation
> > with 5.3, now I'm testing 5.4 and the machine stops while
> > trying to load the Qlogic driver. I wonder if 5.4 will support
> > this alpha. Thanks you.
> 
> Did it ever run any FreeBSD version?

Actually it runs FreeBSD 5.2.1-RELEASE.

> It is not unlikely that the qlogic card needs to be in a specific slot
> to work.

it's in pci1:4:0, did you suggest that maybe I must change the slot?
       
> pciconf -lv
dc0 at pci0:3:0:   class=0x020000 card=0x00000000 chip=0x00191011 rev=0x30 hdr=0x00
    vendor   = 'Digital Equipment Corporation'
    device   = 'DC21142/3 PCI/CardBus 10/100 Mbit Ethernet Ctlr'
    class    = network
    subclass = ethernet
isab0 at pci0:7:0: class=0x060100 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
    vendor   = 'Cypress Semiconductor'
    device   = '82C693 PCI to ISA Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0 at pci0:7:1:       class=0x010180 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
    vendor   = 'Cypress Semiconductor'
    device   = '82C693 PCI to ISA Bridge'
    class    = mass storage
    subclass = ATA
atapci1 at pci0:7:2:       class=0x010100 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
    vendor   = 'Cypress Semiconductor'
    device   = '82C693 PCI to ISA Bridge'
    class    = mass storage
    subclass = ATA
ohci0 at pci0:7:3: class=0x0c0310 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
    vendor   = 'Cypress Semiconductor'
    device   = '82C693 PCI to ISA Bridge'
    class    = serial bus
    subclass = USB
none0 at pci0:12:0:        class=0x030000 card=0x0a321048 chip=0x3d07104c rev=0x01 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'TVP4020 AGP Permedia 2'
    class    = display
    subclass = VGA
pcib1 at pci0:20:0:        class=0x060400 card=0x000000dc chip=0x00241011 rev=0x03 hdr=0x01
    vendor   = 'Digital Equipment Corporation'
    device   = '21151/2 PCI to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isp0 at pci1:4:0:  class=0x010000 card=0x00000000 chip=0x10201077 rev=0x05 hdr=0x00
    vendor   = 'QLogic Corporation'
    device   = 'QLA1020/104x Fast-Wide-SCSI "Fast!SCSI IQ" Host Adapter'
    class    = mass storage
    subclass = SCSI


I'd like to know if other miata owners are testing 5.4? 

-- 
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS/IT d- s+:+() a31 C+++ UBL+++$ P+ L+++ E--- W++ N+ o++ K- w---
O+ M+ V- PS+ PE+ Y++ PGP+>+++ t+ 5 X+$ R- tv-- b+++ DI D++>+++
G++ e- h+(++) !r !z
------END GEEK CODE BLOCK------