5.4-STABLE problem on 164SX?

[Wilko Bulte]

On Sun, Jun 05, 2005 at 09:54:05PM +0200, Bernd Walter wrote..
> On Sun, Jun 05, 2005 at 08:44:56PM +0200, Wilko Bulte wrote:
> > Folks,
> > 
> > After just having built the June 2005 6.0 and 5.4-STABLE
> > snapshots I tested them on my 164SX.
> > 
> > 6.0 works OK, but 5.4-STABLE after a test install gives me a hang
> > when rebooting from the freshly installed disk:
> > 
> > cd0 at ahc0 bus 0 target 0 lun 0
> > cd0: <TOSHIBA CD-ROM XM-6201TA 1206> Removable CD-ROM SCSI-2 device 
> > cd0: 10.000MB/s transfers (10.000MHz, offset 15)
> > cd0: Attempt to query device size failed: NOT READY, Medium not present
> > da0 at ahc0 bus 0 target 1 lun 0
> > da0: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device 
> > da0: Serial Number REF38392        
> > da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
> > Enabled
> > da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
> > (ahc0:A:0:0): Sending SDTR period 19, offset f
> > (ahc0:A:0:0): Received SDTR period 19, offset f
> >         Filtered to period 19, offset f
> > (cd0:ahc0:0:0:0): error 6
> > (cd0:ahc0:0:0:0): Unretryable Error
> > (ahc0:A:0:0): Sending SDTR period 19, offset f
> > (ahc0:A:0:0): Received SDTR period 19, offset f
> >         Filtered to period 19, offset f
> > (cd0:ahc0:0:0:0): error 6
> > (cd0:ahc0:0:0:0): Unretryable Error
> > GEOM: Configure da0a, start 0 length 268435456 end 268435455
> > GEOM: Configure da0b, start 268435456 length 2143109120 end 2411544575
> > GEOM: Configure da0c, start 0 length 9139200000 end 9139199999
> > GEOM: Configure da0d, start 2411544576 length 268435456 end 2679980031
> > GEOM: Configure da0e, start 2679980032 length 268435456 end 2948415487
> > GEOM: Configure da0f, start 2948415488 length 6190784512 end 9139199999
> > Mounting root from ufs:/dev/da0a
> > start_init: trying /sbin/init
> > 
> > <hang>
> > 
> > On the DS10 the same thing works just fine.
> > 
> > I would appreciate if people with other Alpha models could try the SNAP
> > to see if it is just my box.  
> 
> I personally never had success with any ahc controller in any alpha.

In what sense?  Booting an ahc?  Only a few SRM versions / machine models
can do that.  But the 164SX allows me to install and boot 6.0-current
without problems.

-- 
Wilko Bulte				wilko at FreeBSD.org