5.4-STABLE problem on 164SX?

[Wilko Bulte]

Folks,

After just having built the June 2005 6.0 and 5.4-STABLE
snapshots I tested them on my 164SX.

6.0 works OK, but 5.4-STABLE after a test install gives me a hang
when rebooting from the freshly installed disk:

cd0 at ahc0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-6201TA 1206> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device 
da0: Serial Number REF38392        
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
(ahc0:A:0:0): Sending SDTR period 19, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
        Filtered to period 19, offset f
(cd0:ahc0:0:0:0): error 6
(cd0:ahc0:0:0:0): Unretryable Error
(ahc0:A:0:0): Sending SDTR period 19, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
        Filtered to period 19, offset f
(cd0:ahc0:0:0:0): error 6
(cd0:ahc0:0:0:0): Unretryable Error
GEOM: Configure da0a, start 0 length 268435456 end 268435455
GEOM: Configure da0b, start 268435456 length 2143109120 end 2411544575
GEOM: Configure da0c, start 0 length 9139200000 end 9139199999
GEOM: Configure da0d, start 2411544576 length 268435456 end 2679980031
GEOM: Configure da0e, start 2679980032 length 268435456 end 2948415487
GEOM: Configure da0f, start 2948415488 length 6190784512 end 9139199999
Mounting root from ufs:/dev/da0a
start_init: trying /sbin/init

<hang>

On the DS10 the same thing works just fine.

I would appreciate if people with other Alpha models could try the SNAP
to see if it is just my box.  

W/

-- 
Wilko Bulte				wilko at FreeBSD.org