GENERIC doesn't boot AlphaServer 1000

[Wilko Bulte]

On Sun, Jul 03, 2005 at 10:30:20AM +0200, Poul-Henning Kamp wrote..
> 
> My Alphaserver 1000 doesn't like a GENERIC kernel:
> 
> de0: <Digital 21040 Ethernet> port 0x10000-0x1007f mem 0x81301000-0x8130107f irq
>  3 at device 12.0 on pci0
> de0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x81301000
> de0: interrupting at CIA irq 3
> de0: [GIANT-LOCKED]
> de0: DEC 21040 [10Mb/s] pass 2.4
> de0: bpf attached
> de0: Ethernet address: 00:00:f8:21:89:2f
> de0: if_start running deferred for Giant
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x10080-0x100bf mem 0x81300000-0x81300
> fff,0x81100000-0x811fffff irq 5 at device 13.0 on pci0
> fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81300000
> fxp0: using memory space register mapping
> fxp0: PCI IDs: 8086 1229 8086 000c 0008
> fxp0: Dynamic Standby mode is disabled
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: bpf attached
> fxp0: Ethernet address: 00:d0:b7:49:e6:c9
> fxp0: interrupting at CIA irq 5
> fxp0: [MPSAFE]
> 
> halted CPU 0
> 
> halt code = 7
> machine check while in PAL mode
> PC = 18100           

DS10 on booting the latest SNAP CD I produced:

Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 616519676 Hz quality 800
Timecounters tick every 0.976 msec
Waiting 5 seconds for SCSI devices to settle
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009fb128
acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4
ad0: 39093MB <FUJITSU MPG3409AH E C3C9> at ata1-master UDMA33
da0 at isp0 bus 0 target 0 lun 0
da0: <COMPAQ AD009322B9 3A07> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)

fatal kernel trap:

    trap entry     = 0x4 (unaligned access fault)
    cpuid          = 0
    faulting va    = 0xfffffc00010d7dc2
    opcode         = 0x28
    register       = 0x1
    pc             = 0xfffffc00004c732c
    ra             = 0xfffffc00004c7598
    sp             = 0xfffffe001a35dbd0
    curthread      = 0xfffffc003eac1500
        pid = 2, comm = g_event

[thread pid 2 tid 100003 ]
Stopped at      is_pmbr+0x4c:   and     t0,#0xff,t0
<t0=0xfffffc00010d7dbe>
db> 

164SX allows an install from the SNAP, but hangs after printing
Trying /sbin/init :(

Life is not good in Alpha land..

W/
-- 
Wilko Bulte				wilko at FreeBSD.org