MiataGL doesn't boot in 5.4-RC2
Wilko Bulte
wb at freebie.xs4all.nl
Thu Apr 14 11:03:44 PDT 2005
On Tue, Apr 12, 2005 at 11:27:18PM +0200, Bernd Walter wrote..
> On Tue, Apr 12, 2005 at 11:06:55PM +0200, Wilko Bulte wrote:
> > On Tue, Apr 12, 2005 at 10:51:05PM +0200, Bernd Walter wrote..
> > > On Tue, Apr 12, 2005 at 10:13:50PM +0200, Victor Balada Diaz wrote:
> > > > When i try to boot the bootonly cd of FreeBSD 5.4-RC2 it hangs forever after
> > > > probing the isp(4) card.
> > > >
> > > > >>>show conf
> > > >
> > > >
> > > > Bus 00 Slot 20: DECchip 21152 PCI to PCI Bridge
> > > > Bus 01 Slot 04: ISP1040 Scsi Controller
> > > > pkc0.7.0.1004.0 SCSI Bus ID 7
> > > > dkc0.0.0.1004.0 RZ2CC-KB
> > > > dkc100.1.0.1004.0 SEAGATE ST39175LW
> > >
> > > Put the isp card into a 64 bit slot.
> >
> > Miata GL has onboard isp(4) SCSI. Miata MX5 does not.
>
> Ah - mixed those up.
>
> > That said, any relation that you can think of with interrupt routing?
>
> No - there is a problem on MX5, but in this case the bridge setup
> looks correct.
> If there are problems with int routing then they should be limited
> to add-on hardware, not standard.
Hmm.
> All I know about is that there are problems with the cypress
> controller, which very likely still exists.
>
> > > Would be interesting to see what happens with your IDE controller.
> >
> > Yup...
>
> Are there any other models with Cypress chips?
> I think most in that time range had CMD646 ones.
Yup: my 164SX has:
PCI Bus
Bus 00 Slot 05: Intel 8255x Ethernet
eia0.0.0.5.0 00-D0-B7-55-5F-AE
Bus 00 Slot 07: 164514E4/007C0E11
Bus 00 Slot 08/0: Cypress 82C693
Bridge to Bus 1,
ISA
Bus 00 Slot 08/1: Cypress 82C693 IDE
dqa.0.0.108.0
Bus 00 Slot 08/2: Cypress 82C693 IDE
dqb.0.1.208.0
Bus 00 Slot 08/3: Cypress 82C693 USB
Bus 00 Slot 09: Adaptec AIC-7880
pka0.7.0.9.0 SCSI Bus ID 7
dka0.0.0.9.0 TOSHIBA CD-ROM
XM-62
dka100.1.0.9.0 IBM DDRS-39130W
--
Wilko Bulte wilko at FreeBSD.org
More information about the freebsd-alpha
mailing list